Star Trac 8RB-10 Installation guide

Type
Installation guide
CORE HEALTH & FITNESS LLC
Page 1 of 2
620-8343 Rev: A
OpenHub Console Tablet Holder Installation Instructions
Tablet Holders 700-0394 and 700-0395
Step 1:
Remove the tablet holder, mounting bracket, and hardware from the packaging materials (Figure 1).
Fig. 1
Step 2:
Using the four M8x20MMx1.25MM screws, mount the tablet holder bracket to the chassis (Figure 2).
Fig. 2
CORE HEALTH & FITNESS LLC
Page 2 of 2
620-8343 Rev: A
Step 3:
Connect the top rear display plastic access piece onto the console using two M4X19MMx0.7MM screws (Figure 3 & 4).
Fig. 3
Fig. 4
Step 4:
Using the three M4x16MMx0.7MM screws, mount the tablet holder to the bracket (Figure 5).
Fig. 5
  • Page 1 1
  • Page 2 2

Star Trac 8RB-10 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI