Tripp Lite B125-150 User manual

Tripp Lite
Brand
Tripp Lite
Model
B125-150
Category
Video splitters
Type
User manual

Tripp Lite B125-150 HDMI Over Cat5/6 Extender can extend an HDTV signal beyond the standard 15-ft. limitation. It is fully compatible with 480p, 720p, 1080i and 1080p resolutions. The product features fully automatic equalization up to 40dB and eliminates equipment noise in the viewing environment. You can use solid wire Cat6 (24AWG) cable for maximum range. The ranges are: 480p resolution—up to 230 ft. (70 m); 720p resolution—up to 196 ft. (60 m); 1080p resolution—up to 115 ft. (35 m).

Tripp Lite B125-150 HDMI Over Cat5/6 Extender can extend an HDTV signal beyond the standard 15-ft. limitation. It is fully compatible with 480p, 720p, 1080i and 1080p resolutions. The product features fully automatic equalization up to 40dB and eliminates equipment noise in the viewing environment. You can use solid wire Cat6 (24AWG) cable for maximum range. The ranges are: 480p resolution—up to 230 ft. (70 m); 720p resolution—up to 196 ft. (60 m); 1080p resolution—up to 115 ft. (35 m).

1
Owner’s Manual
HDMI Over Cat5/6
Extender
Model: B125-150
1111 West 35th Street • Chicago, IL 60609
www.tripplite.com/support
Copyright © 2009 Tripp Lite. All rights reserved.
All trademarks are the property of their respective owners.
1. Introduction 2
2. Installation 2
3. Troubleshooting 3
4. Warranty and Warranty Registration 4
Español 5
Français 9
Warranty
Registration:
register online today for a
chance to win a FREE Tripp Lite
product—www.tripplite.com/warranty
200911174 93-2786.indd 1 12/30/2009 3:50:16 PM
2
The B125-150 HDMI Over Cat5/6 Extender can extend an HDTV signal beyond
the standard 15-ft. limitation, as shown in the installation diagram. For maximum
range use solid wire Cat6 (24AWG) cable. When used, ranges will be: 480p
resolution—up to 230 ft. (70 m); 720p resolution—up to 196 ft. (60 m); 1080p
resolution—up to 115 ft. (35 m). Use Tripp Lite P568-series HDMI cables to
connect the Extender to the HDMI source and monitor.
Product Features
• Fully automatic equalization up to 40dB; no system control required
• Eliminates equipment noise in the viewing environment
• Compatible with 480p, 720p, 1080i and 1080p resolutions
• HDMI and HDCP compliant
Package Contents
• HDMI Extender Source Unit
• Power Adapter (Input: 100-240V, 50/60 Hz, 0.4A/Output: 9V, 1.5A)
• HDMI Extender Display Unit
• Owner’s Manual
1. Introduction
1
Connect the HDMI source to the B125-150 Source Unit using a Tripp Lite
P568-series HDMI cable.*
2
Connect the HDMI display (monitor) to the B125-150 Display Unit using a
Tripp Lite P568-series HDMI cable.*
3
Connect a Tripp Lite N001-, N002 or N201-series Cat5e/6 cable* from Port A
of the B125-150 Source Unit to Port A of the B125-150 Display Unit.
2. Installation
B125-150
Display
B125-150
Source
Cat5/6 CablesP568-Series
HDMI Cable
P568-Series
HDMI Cable
Up to 15 ft.
Distances as noted above
TV Monitor
HDMI
Source
200911174 93-2786.indd 2 12/30/2009 3:50:17 PM
3
2. Installation continued
4
Connect a Tripp Lite N001-, N002 or N201-series Cat5e/6 cable* from Port B
of the B125-150 Source Unit to Port B of the B125-150 Display Unit.
Note: If the Cat5/6 cables are cross-connected (A to B and B to A) the
Extender will not function. To avoid this problem, either tag the cables or
use differently colored cables, e.g. black and red.
5
Connect the included Power Adapter to the B125-150 Display Unit, then plug
it into an AC power outlet. To prevent damage and assure peak performance,
it is recommended that the Power Adapter be plugged into a Tripp Lite Surge
Suppressor.
Note: When working properly the green LED on the Display Unit will be
lit to indicate power is being received, and the red LED will NOT be lit.
When the red LED is lit, the unit is NOT receiving a working signal.
* HDMI and Cat5e/6 cables sold separately.
3. Troubleshooting
If the image is not displaying properly:
1
Check to ensure that Connectors A and B on the source side are connected
to Connectors A and B on the display side. If the Cat5/6 cables are cross-
connected (A to B and B to A), the Extender will not function.
2
Check to ensure that you are not using Cat5e/6 cross-over cabling. If this type
of cabling is used, the Extender will not function.
3
Verify that the HDMI source and display are functioning properly by
connecting them using a Tripp Lite P568-series cable no longer than 15 ft.
If the source and display are functioning properly, test the Cat5/6 cabling by
connecting it between two Cat5/6 devices. If the Cat5/6 cabling is functioning
properly, visit www.tripplite.com/support for further assistance.
200911174 93-2786.indd 3 12/30/2009 3:50:17 PM
4
4. Warranty and Warranty Registration
1-Year Limited Warranty
TRIPP LITE warrants its products to be free from defects in materials and workmanship for a
period of one (1) year from the date of initial purchase. TRIPP LITE’s obligation under this warranty
is limited to repairing or replacing (at its sole option) any such defective products. To obtain service
under this warranty, you must obtain a Returned Material Authorization (RMA) number from
TRIPP LITE or an authorized TRIPP LITE service center. Products must be returned to TRIPP
LITE or an authorized TRIPP LITE service center with transportation charges prepaid and must
be accompanied by a brief description of the problem encountered and proof of date and place
of purchase. This warranty does not apply to equipment which has been damaged by accident,
negligence or misapplication or has been altered or modified in any way.
EXCEPT AS PROVIDED HEREIN, TRIPP LITE MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. Some states do not permit limitation or exclusion of implied warranties;
therefore, the aforesaid limitation(s) or exclusion(s) may not apply to the purchaser.
EXCEPT AS PROVIDED ABOVE, IN NO EVENT WILL TRIPP LITE BE LIABLE FOR DIRECT,
INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OF THIS PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Specifically, TRIPP LITE is not liable for any costs, such as lost profits or revenue, loss of
equipment, loss of use of equipment, loss of software, loss of data, costs of substitutes, claims by
third parties, or otherwise.
Warranty Registration
Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You’ll
be automatically entered into a drawing for a chance to win a FREE Tripp Lite product!*
* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.
Tripp Lite follows a policy of continuous improvement. Product specifications are subject to change
without notice.
1111 West 35th Street • Chicago, IL 60609
www.tripplite.com/support
200911174 • 932786_EN
200911174 93-2786.indd 4 12/30/2009 3:50:17 PM
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Tripp Lite B125-150 User manual

Tripp Lite
Brand
Tripp Lite
Model
B125-150
Category
Video splitters
Type
User manual

Tripp Lite B125-150 HDMI Over Cat5/6 Extender can extend an HDTV signal beyond the standard 15-ft. limitation. It is fully compatible with 480p, 720p, 1080i and 1080p resolutions. The product features fully automatic equalization up to 40dB and eliminates equipment noise in the viewing environment. You can use solid wire Cat6 (24AWG) cable for maximum range. The ranges are: 480p resolution—up to 230 ft. (70 m); 720p resolution—up to 196 ft. (60 m); 1080p resolution—up to 115 ft. (35 m).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents