Tripp Lite B125-150 User manual

Tripp Lite
Brand
Tripp Lite
Model
B125-150
Category
Video splitters
Type
User manual

This manual is also suitable for

Tripp Lite B125-150 is an HDMI over Dual Cat5 Extender Kit that allows you to extend either a 1080p (24 Hz) or 1080i (60 Hz) signal up to 150 ft. from the source using Cat5e/6 cabling. It's fully automatic equalization up to 40dB and HDCP compatible. With this device, you can connect your HDMI source to the HDMI input on the local transmitter unit and then connect the TMDS RJ45 port on the local transmitter to the TMDS RJ45 port on the remote receiver using Cat5e/6 cable. Next, connect the DDC RJ45 port on the local transmitter to the DDC RJ45 port on the remote receiver using Cat5e/6 cable.

Tripp Lite B125-150 is an HDMI over Dual Cat5 Extender Kit that allows you to extend either a 1080p (24 Hz) or 1080i (60 Hz) signal up to 150 ft. from the source using Cat5e/6 cabling. It's fully automatic equalization up to 40dB and HDCP compatible. With this device, you can connect your HDMI source to the HDMI input on the local transmitter unit and then connect the TMDS RJ45 port on the local transmitter to the TMDS RJ45 port on the remote receiver using Cat5e/6 cable. Next, connect the DDC RJ45 port on the local transmitter to the DDC RJ45 port on the remote receiver using Cat5e/6 cable.

1
Owner’s Manual
WARRANTY
REGISTRATION
Register online today for
a chance to win a FREE Tripp Lite
product! www.tripplite.com/warranty
HDMI over Dual Cat5
Extender Kit
Model: B125-150
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
Note: Follow these instructions and operating procedures to ensure correct performance and to
prevent damage to this unit or to its connected devices. Copyright © 2012 Tripp Lite.
All rights reserved. All trademarks are the sole property of their respective owners.
Product Features 2
Optional Accessories 2
Installation and Operation 2
Warranty & Warranty Registration 4
•LocalTransmitterandRemoteReceiverUnits
•ExternalPowerSupply(Input:100-240V,50/60Hz,0.5AOutput:9V,1.5A)
•Owner’sManual
Package Contents
201112150-93-3153.indd 1 1/4/2012 11:49:36 AM
TMDS
UP TO 150 ft.
LOCAL
TRANSMITTER
BLU-RAY
1080p (24 Hz)
or
1080i (60 Hz)
REMOTE
RECEIVER
DDC
DISPLAY
B125-150 Installation Diagram
2
Installation and Operation
Refer to the installation diagrams below as you perform these steps.
Note:
1. Test to make sure the entire installation works properly before pulling cables
through ceilings/walls.
2. To achieve maximum distance and performance, use 24AWG solid wire Cat5e/6
cable. Using stranded wire Cat5e/6 cable, or cable with a gauge size higher
than 24AWG will result in shorter extension distance. All Tripp Lite N202-Series
Cat6 cables are made with 24AWG, solid wire cabling.
3. Make sure the power to all devices you are connecting to is turned off prior to
installation.
Product Features
•Extendeithera1080p(24Hz)or1080i(60Hz)signalupto150ft.
fromthesourceusingCat5e/6cabling
•Fullyautomaticequalizationupto40dB;nosystemcontrolrequired
•HDCPcompatible
Optional Accessories
•N202-SeriesCat624AWG,solidwirepatchcables
•P568-SeriesHighSpeedHDMIcables
201112150-93-3153.indd 2 1/4/2012 11:49:36 AM
3
1
ConnecttheHDMIsourcetotheHDMIinputonthelocaltransmitterunit.
2
Connect the TMDS RJ45portonthelocaltransmittertotheTMDS
RJ45portontheremotereceiverusingCat5e/6cable.
Note: See the installation diagrams for maximum extension
distance at 1080p (24 Hz) / 1080i (60 Hz) video resolutions.
3
Connect the DDC RJ45portonthelocaltransmittertotheDDC
RJ45portontheremotereceiverusingCat5e/6cable.
Note: See the installation diagrams for maximum extension
distance at 1080p (24 Hz) / 1080i (60 Hz) video resolutions.
4
ConnecttheHDMIoutputontheremotereceivertotheHDMImonitor.
5
Connecttheexternalpowersupplytotheremotereceiver,andthen
plugitintoaTrippLiteSurgeSuppressor,UninterruptiblePowerSupply
(UPS),orPowerDistributionUnit(PDU).TheGreenLEDontheremote
unitwillilluminatetoindicatethatpowerisbeingreceived.
6
TurnonthepowertotheHDMIsource.
Note: The Red LED on the Remote Receiver unit will illuminate only
if a working signal is NOT being received. The unit is functioning
properly when this LED is not illuminated.
Installation and Operation
201112150-93-3153.indd 3 1/4/2012 11:49:36 AM
4
Warranty and Warranty Registration
1-Year Limited Warranty
TRIPPLITEwarrantsitsproductstobefreefromdefectsinmaterialsandworkmanshipforaperiodofone(1)year
fromthedateofinitialpurchase.TRIPPLITE’sobligationunderthiswarrantyislimitedtorepairingorreplacing(at
itssoleoption)anysuchdefectiveproducts.Toobtainserviceunderthiswarranty,youmustobtainaReturned
MaterialAuthorization(RMA)numberfromTRIPPLITEoranauthorizedTRIPPLITEservicecenter.Productsmust
bereturnedtoTRIPPLITEoranauthorizedTRIPPLITEservicecenterwithtransportationchargesprepaidandmust
be accompanied by a brief description of the problem encountered and proof of date and place of purchase. This
warrantydoesnotapplytoequipment,whichhasbeendamagedbyaccident,negligenceormisapplicationorhas
been altered or modified in any way.
EXCEPTASPROVIDEDHEREIN,TRIPPLITEMAKESNOWARRANTIES,EXPRESSORIMPLIED,INCLUDING
WARRANTIESOFMERCHANTABILITYANDFITNESSFORAPARTICULARPURPOSE.
Somestatesdonotpermitlimitationorexclusionofimpliedwarranties;therefore,theaforesaidlimitation(s)or
exclusion(s)maynotapplytothepurchaser.
EXCEPTASPROVIDEDABOVE,INNOEVENTWILLTRIPPLITEBELIABLEFORDIRECT,INDIRECT,SPECIAL,
INCIDENTALORCONSEQUENTIALDAMAGESARISINGOUTOFTHEUSEOFTHISPRODUCT,EVENIFADVISEDOF
THEPOSSIBILITYOFSUCHDAMAGE.Specically,TRIPPLITEisnotliableforanycosts,suchaslostprotsor
revenue,lossofequipment,lossofuseofequipment,lossofsoftware,lossofdata,costsofsubstitutes,claimsby
thirdparties,orotherwise.
Useofthisequipmentinlifesupportapplicationswherefailureofthisequipmentcanreasonablybeexpected
tocausethefailureofthelifesupportequipmentortosignicantlyaffectitssafetyoreffectivenessisnot
recommended.Donotusethisequipmentinthepresenceofaammableanestheticmixturewithair,oxygenor
nitrousoxide.
WEEE Compliance Information for Tripp Lite Customers and
Recyclers (European Union)
UndertheWasteElectricalandElectronicEquipment(WEEE)Directiveandimplementingregulations,when
customersbuynewelectricalandelectronicequipmentfromTrippLitetheyareentitledto:
•Sendoldequipmentforrecyclingonaone-for-one,like-for-likebasis(thisvariesdependingonthecountry)
•Sendthenewequipmentbackforrecyclingwhenthisultimatelybecomeswaste
WARRANTY REGISTRATION
Visitwww.tripplite.com/warrantytodaytoregisterthewarrantyforyournewTrippLiteproduct.You’llbeautomatically
entered into a drawing for a chance to win a FREE Tripp Lite product!*
*Nopurchasenecessary.Voidwhereprohibited.Somerestrictionsapply.Seewebsitefordetails.
TrippLitefollowsapolicyofcontinuousimprovement.Productspecicationsaresubjecttochangewithoutnotice.
1111 W. 35th Street, Chicago, IL 60609 USA
www.tripplite.com/support
201112150•93-3153
201112150-93-3153.indd 4 1/4/2012 11:49:36 AM
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Tripp Lite B125-150 User manual

Tripp Lite
Brand
Tripp Lite
Model
B125-150
Category
Video splitters
Type
User manual
This manual is also suitable for

Tripp Lite B125-150 is an HDMI over Dual Cat5 Extender Kit that allows you to extend either a 1080p (24 Hz) or 1080i (60 Hz) signal up to 150 ft. from the source using Cat5e/6 cabling. It's fully automatic equalization up to 40dB and HDCP compatible. With this device, you can connect your HDMI source to the HDMI input on the local transmitter unit and then connect the TMDS RJ45 port on the local transmitter to the TMDS RJ45 port on the remote receiver using Cat5e/6 cable. Next, connect the DDC RJ45 port on the local transmitter to the DDC RJ45 port on the remote receiver using Cat5e/6 cable.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers