Marmitek DoorGuard 350 User manual

Page is loading ...

DOORGUARD350

1

ENGLISH

SAFETY WARNINGS

x To prevent short circuits, this product (except the outdoor

camera) should only be used inside and only in dry spaces. Do not

expose the components to rain or moisture. Do not use the

product close to a bath, swimming pool etc.

x Do not expose the components of your systems to extremely high

temperatures or bright light sources.

x In case of improper usage or if you have altered and repaired the

product yourself, all guarantees expire. Marmitek does not accept

responsibility in the case of improper usage of the product or

when the product is used for purposes other than specified.

Marmitek does not accept responsibility for additional damage

other than covered by the legal product responsibility.

x This product is not a toy. Keep out of reach of children.

x Do not open the product: the device may contain live parts. The

product should only be repaired or serviced by a qualified

repairman.

x Only connect the power cord after checking whether the mains

voltage is the same as the values on the identification tags. Never

connect an adapter or power cord when it is damaged. In that

case, contact your supplier.

2

TABLE OF CONTENTS

SAFETY WARNINGS..................................................................................1

TABLE OF CONTENTS ...............................................................................2

INTRODUCTION........................................................................................3

SET CONTENTS .........................................................................................3

Set......................................................................................................3

Extra monitor (available separately)................................................3

INSTALLATION..........................................................................................4

Step 1. Mounting the doorbell camera onto the door frame........5

Step 2. Connecting the cable for the camera..................................5

Step 3. Mounting the monitor onto the wall. ................................5

SETTING BRIGHTNESS, CONTRAST AND COLOUR ..................................6

FUNCTION.................................................................................................6

EXTRA POSSIBILITIES WITH YOUR DOORGUARD350 .............................7

Connecting an electric door opener................................................7

Connecting multiple monitors.........................................................7

FREQUENTLY ASKED QUESTIONS ...........................................................8

TECHNICAL DATA ....................................................................................9

DOORGUARD350

3

ENGLISH

INTRODUCTION

Congratulations on your purchase of the Marmitek DoorGuard350™.

Using this video-door phone you can hear and see the visitor at the

door (without the visitor being aware of it) before you decide to

open it. The camera is concealed in the small doorbell and delivers

high quality pictures, even in the dark. This camera is small enough to

mount onto the door frame, without the need to drill holes in the

(hollow) wall.

SET CONTENTS

Set

1. Monitor with screen

2. Wall plate for the monitor

3. Doorbell with camera and rain cover

4. Power adapter

5. 10 meters 4 core cable for connecting the camera

6. 1.5 metre 2-core cable for connecting the universal electric door-

opener

7. Mounting hardware

8. User manual

Extra monitor (available separately)

1. Monitor with screen

2. Wall plate for the monitor

3. Power adapter

4. 10 meters 4 core cable to connect to the first monitor

5. Mounting hardware

6. Special tool

7. User manual

INSTALLATION

Description of the parts

Doorbell camera front

1

.

2

.

3

.

4

.

5

.

6

.

1

.

1. Screw hole

2. Loudspeaker

3. Camera

4. LEDs, for visibility in the dark

5. Bell button

6. Microphone

Doorbell camera back

7.

8.

7. 2-core cable with connector for connecting

electric door-opener.

8. 4-wire earthed power cable with connector for

transfer of image and sound to monitor

11.

15.

18.

17.

10.

9.

14.

12.

20.

19.

16.

13.

21.

R3 Black (GND)

R2 Red (VDD)

R1 White (Audio)

R4 Yellow(Video)

Monitor

9. Microphone 16. Mute button

10. Loudspeaker 17. Volume button

11. screen 18. Menu button

12. Power ‘On’ LED 19. + button

13. Monitor button 20. – button

14. Intercom button 21. Ring tones button

15. Door-open button

Connection contacts for camera cable (R1 thru R4)

DC adapter connection

4

DOORGUARD350

5

ENGLISH

Step 1. Mounting the doorbell camera onto the

door frame.

x Drill a hole (15mm) in the door frame at the height that you

want to mount the doorbell camera.

x Pass the power cable through the hole in the rain cover and

through the door frame.

x Attach the camera and rain cover to the frame with the screws

supplied.

x Cover the screw holes in the camera with the caps supplied.

Step 2. Connecting the cable for the camera.

x The additionally supplied cable for the connection of the camera,

has a black male connector at the camera end and a 4 U

connector at the monitor end. Click the black connector of the

doorbell camera onto the black male connector of the

additionally supplied cable. Guide the cable to the spot where

the monitor is to be mounted (Beware: there should be a power

socket in the area).

x Mount the wall plate onto the wall using the four supplied

screws.

Step 3. Mounting the monitor onto the wall.

x Take the monitor and secure the cable’s 4 U-connectors in the

correct order under the 4 connectors.

x Connect the power adapter with the backside of the monitor.

x Now place the monitor against the wall plate and move it up and

down against the plate such that it snap-locks onto the plate.

x Your DoorGuard350™ has now been installed successfully and is

ready to use.

x You can always slide off the monitor by sliding it upwards.

6

SETTING BRIGHTNESS, CONTRAST

AND COLOUR

You can set the following by pressing numerous times on the menu

button:

BRIGHTNESS

CONTRAST

COLOUR

Change the setting by pressing on the + or – button.

FUNCTION

As soon as a visitor rings the doorbell by pressing on the doorbell

button, the image will appear instantly on the monitor in the house.

This way you can see who is at the door before you decide to open it

(or pretend you’re not at home). To speak to the visitor, you simply

press the monitor button. If you have also installed an electric door

opener, you can open the door by pressing on the door-open button.

(Only works if you have an image on the monitor)

If you wish to look outside without anyone having rung the doorbell,

press the monitor button. You cannot be heard outside when you do

this.

If you wish those outside to hear you, press the intercom button.

You can switch off the monitor’s bell with the mute button. The

on/mute button then changes from red to blue. Pressing the mute

button again reconnects the bell. And the blue colour changes back

to red.

DOORGUARD350

7

ENGLISH

EXTRA POSSIBILITIES WITH YOUR

DOORGUARD350

Connecting an electric door opener

- To open the door from the monitor.

- The camera will provide the power for the door-opener

- You need an electric door opener of 8 to 12 V DC. (Marmitek art nr

09774).

- Connect the door opener to the 2-core cable supplied. The cable

connector connects to the 2-core connector on the camera.

Connecting multiple monitors

- To be able to see who is at the door from several places (max. 4).

DoorGuard350 Hands Free monitor: art.no: 08056 (E version) 08062

(UK version).

The 4-core cable that is supplied with the extra monitor is parallel

connected to the first monitor’s connection points. A 3

rd

or 4

th

monitor can be connected to the 2

nd

or 3

rd

monitor.

- If you want to bridge a greater distance, then check out the

following table for the required cable type.

Cable length Required cable type

1-25m 4 core cable of minimum 4x 0,55mm

2

25-50m coax cable, 75 ohm of minimum 0,5mm

2

+ 2 wire

audio 0,35mm

2

50-100m coax cable, 75 ohm of minimum 1.0mm

2

+ 2 wire

audio 0,35mm

2

100-300m coax cable, 75 ohm of minimum 1.5mm

2

+ 2 wire

audio 0,5mm

2

8

FREQUENTLY ASKED QUESTIONS

There is no image

Check if the power cable is properly connected to the power socket.

Check the position of the button for minimum and maximum

contrast, and turn the wheel on the side to select the best image.

Check if the connectors are properly fixed

There is no sound

Check if the connectors are properly fixed

The image is hazy (clouds)

Check if there are interferences in the surrounding area. For example

a high voltage cable, electric appliances etc.

Do you still have questions?

Please check out www.marmitek.com for more information.

ENGLISH

TECHNICAL DATA

Monitor

Resolution: 320 x 240

Power supply: 230V AC DC 15V

Screen: 4"/ 10cm

Bell sound: Ding-dong (adjustable volume)

Power consumption: Max 5 Watt (without door opener)

Door open switch: Max DC12V/1A.

Dimensions: 220x120x25mm

Camera

Camera: CMOS Colour

Lens and angle: 50°

Min. illumination: 0,1 LUX

Night vision: 5 Infrared LEDs

Sound: Built-in microphone and loudspeaker

Dimensions: 45x120x35mm

Environmental Information for Customers in the European Union

European Directive 2002/96/EC requires that the equipment bearing this symbol

on the product and/or its packaging must not be disposed of with unsorted

municipal waste. The symbol indicates that this product should be disposed of

separately from regular household waste streams. It is your responsibility to

dispose of this and other electric and electronic equipment via designated

collection facilities appointed by the government or local authorities. Correct disposal and

recycling will help prevent potential negative consequences to the environment and human

health. For more detailed information about the disposal of your old equipment, please contact

your local authorities, waste disposal service, or the shop where you purchased the product.

DOORGUARD350

9

Page is loading ...

60

0 DECLARATION OF CONFORMITY

Hereby, Marmitek BV, declares that this DOORGUARD350 is in compliance

with the essential requirements and other relevant provisions of the

following Directives:

Directive 2004/108/ec of the european parliament and of the council of 15

December 2004 on the approximation of the laws of the Member States relating to

electromagnetic compatibility

Directive 2006/95/EC of the European Parliament and of the Council of 12

December 2006 on the harmonisation of the laws of Member States relating to

electrical equipment designed for use within certain voltage limits

Directive 2002/95/EC of the European Parliament and of the Council of 27 January

2003 on the restriction of the use of certain hazardous substances in electrical and

electronic equipment

Commission Regulation (EC) No 278/2009 of 6 April 2009 implementing Directive

2005/32/EC of the European Parliament and of the Council with regard to

ecodesign requirements for no-load condition electric power consumption and

average active efficiency of external power supplies

Hiermit erklärt Marmitek BV die Übereinstimmung des Gerätes

DOORGUARD350 den grundlegenden Anforderungen und den anderen

relevanten Festlegungen der Richtliniën:

Richtlinie 2004/108/eg des europäischen parlaments und des rates vom 15.

Dezember 2004 zur Angleichung der Rechtsvorschriften der Mitgliedstaaten über

die elektromagnetische Verträglichkeit

Richtlinie 2006/95/EG des Europäischen Parlaments und des Rates vom 12.

Dezember 2006 zur Angleichung der Rechtsvorschriften der Mitgliedstaaten

betreffend elektrische Betriebsmittel zur Verwendung innerhalb bestimmter

Spannungsgrenzen

Richtlinie 2002/95/EG des Europäischen Parlaments und des Rates vom 27.

Januar 2003 zur Beschränkung der Verwendung bestimmter gefährlicher Stoffe in

Elektro- und Elektronikgeräten

Verordnung (EG) Nr. 278/2009 der Kommission vom 6. April 2009 zur

Durchführung der Richtlinie 2005/32/EG des Europäischen Parlaments und des

Rates im Hinblick auf die Festlegung von Ökodesign-Anforderungen an die

Leistungsaufnahme externer Netzteile bei Nulllast sowie ihre durchschnittliche

Effizienz im Betrieb

Page is loading ...

MARMITEK BV - P.O. BOX 4257 - 5604 EG EINDHOVEN – THE

NETHERLANDS

Copyrights

Marmitek is a trademark of Pattitude B.V.

ʜ DoorGuard350 is a

trademark of Marmitek B.V.

Copyright and all other proprietary rights in the content (including

but not limited to model numbers, software, audio, video, text and

photographs) rests with Marmitek B.V. Any use of the Content, but

without limitation, distribution, reproduction, modification, display

or transmission without the prior written consent of Marmitek is

strictly prohibited. All copyright and other proprietary notices shall

be retained on all reproductions.

MARMITEK

www.mamitek.com

DOORGUARD350

63

Page is loading ...

Marmitek DoorGuard 350 User manual

Related papers

Other documents