Koenic KVR 22221 Owner's manual

Page is loading ...

English

10

Safety instructions

• This product can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given instructions concerning the use of the appliance

in a safe way and understand the hazards involved or are

under supervision.

• Children shall not play with the product.

• Cleaning and user maintenance shall not be carried out by

children unless they are supervised.

• If the external cord of the charger is damaged the charger

must be scrapped.

• Only use the provided charger for charging.

• Follow the instructions in the chapter Cleaning and care.

• Read this user manual thoroughly

before ﬁrst use and pass it on with the

product. Pay attention to the warnings

on the product and in this user manual.

It contains important information for

your safety as well as for the use and

maintenance of the equipment.

• Never leave the product unsupervised

while it is switched on.

• Do not place heavy objects on top of the

product.

• Never immerse electrical parts of the

product in water during cleaning or

operation. Never hold the product under

running water.

• Do not under any circumstances (e.g.

damage to the power cord, product has

been dropped etc.) attempt to repair the

product yourself. For servicing and repairs,

please consult an authorised service agent.

• The mains voltage must match the infor-

mation on the rating label of the product.

• Only unplugging from the power socket

can separate the product completely

from the mains. Please be sure that the

power plug is in operable condition.

• Avoid damages to the power cord that

may be caused by kinks or contact with

sharp corners.

• Keep this product including power cord

and power plug away from all heat

sources, e.g. ovens, hot plates and other

heat-producing products/objects.

• Only unplugging from the power socket

by the plug itself. Do not pull on the cord.

IM_KVR22221_200225_V02_HR.indb 10IM_KVR22221_200225_V02_HR.indb 10 25/2/2020 3:54 PM25/2/2020 3:54 PM

English

11

Safety instructions

• Unplug the product ...

- when the product is not being used,

- in case of malfunctions,

- before attaching / detaching

accessories and

- before cleaning the product.

• Use this product in dry indoor areas only

and never outdoors.

• This product is not intended for

commercial use. It is designed for

household use only.

• Do not allow the product to operate

unsupervised.

• Make sure that the motor unit and

supply cord do not become wet.

• Use accessories supplied with the

device or recommended by the

manufacturer only!

• This product is suitable only for private

use.

• Let the product cool down suciently

before storing.

• Do not cover the product while in use.

Fire hazard!

• Do not suck up lit cigarettes, hot ashes,

matches, etc. Fire hazard!

• Do not suck up inﬂammable or explosive

materials and gases. The product must

not be used in rooms that contain

explosive gases or liquids.

• Be especially careful when cleaning any

kind of stairs.

• When in use, keep the product away

from clothes and body parts (ﬁngers,

hair, face).

• Do not try to clean people or animals

with the product.

• Only use the charging adapter provided

to charge the product.

• Never expose the product/rechargeable

batteries to excessive heat (e.g. bright

sun, ﬁre), and never throw them into

ﬁre. The rechargeable batteries could

explode.

• The rechargeable battery is ﬁrmly

mounted into the product and cannot be

replaced

• Never short-circuit the contacts of the

rechargeable battery. Do not throw the

rechargeable battery or the product

into ﬁre. There is a danger of ﬁre and

explosion!

• Never charge the rechargeable battery

of the product unattended.

IM_KVR22221_200225_V02_HR.indb 11IM_KVR22221_200225_V02_HR.indb 11 25/2/2020 3:54 PM25/2/2020 3:54 PM

Size = A5

12

English

Congratulations!

Thank you for your purchase of KOENIC

product. Please read this manual carefully and

keep it for future reference.

Intended use

The vacuum cleaner is designed only to

vacuum dry dust and dirt. Using it for anything

else can damage the device or cause injury.

The Imtron GmbH assumes no liability for

damage to the product, for property damage or

for personal injury due to careless or improper

usage of the product, or usage of the product

which does not meet the manufacturer’s

speciﬁed purpose.

Before ﬁrst time use

Remove the product and accessories carefully

from the original packaging. It is recommended

to keep the original packaging for storage. If

you wish to dispose of the original packaging,

please observe applicable legal provisions.

Should you have any questions regarding

proper disposal, contact your local waste

management center.

Inspect the delivery contents for completeness

and damages. Should the delivery contents

be incomplete or damaged, contact your sales

outlet immediately.

After unpacking, please refer to chapter

Cleaning and care.

Before ﬁrst time use the built-in batteries must

be charged for at least 4 hours, please refer to

chapter Charging batteries.

Do not dispose of this product as unsorted

municipal waste. Return it to a designated

collection point for the recycling of WEEE.

By doing so, you will help to conserve resources

and protect the environment. Contact your

retailer or local authorities for more information.

Please dispose of batteries in an

environmentally friendly manner Do not

put batteries into the household waste.

Please use the return and collection systems in

your community or contact the dealer where you

purchased the product.

Content

1 x Handstick vacuum cleaner

1 x Handheld vacuum cleaner

1 x Floor nozzle

1 x Crevice nozzle

1 x Upholstery nozzle

1 x Charging base

1 x Adaptor

1 x User manual

1 x Warranty card

Controls and components

A

Handstick: On/O/ Speed button

B

Handheld vacuum cleaner:

On/O/Speed button

C

Power indicator

D

Release button

E

Textile ﬁlter

F

Dirt ﬁlter

G

Dust container

H

Floor nozzle

I

Power indicator on ﬂoor noozle

J

Floor support part front

K

Brush release button

L

Back ﬂoor support part

M

Charging base

N

Crevice noozle

O

Upholstery noozle

P

Release button for handheld vacuum cleaner

Q

Release button for folding handstick

R

Adaptor

IM_KVR22221_200225_V02_HR.indb 12IM_KVR22221_200225_V02_HR.indb 12 25/2/2020 3:54 PM25/2/2020 3:54 PM

13

English

Assembly

Floor support

Fig.

1

Attach both ﬂoor support parts together

and put on the charging base.

Fig.

2

Plug one end of the adapter into the DC

IN jack of the charging base .

Fig.

3

Connect the adaptor to an electrical

outlet.

Handstick vacuum cleaner

Fig.

4

Raise the handle and lock into place.

To fold back the handle, press the

unlocking knob and release the handle.

Fig.

5

Plug the handstick vacuum cleaner into

the ﬂoor nozzle and lock into place.

To release the ﬂoor nozzle, press the

unlocking knob and pull the handstick

vacuum cleaner out of the nozzle.

Fig.

6

Insert the handheld vacuum cleaner

into the handstick vacuum cleaner and

lock into place.

Note: Make sure that the contacts of the

handheld vacuum cleaner and handstick

vacuum cleaner are not dirty. Clean the

contacts if necessary.

Charging batteries

Fig.

7

Insert the handstick vacuum cleaner

into the charging base.

Note:

• Make sure that the contacts of the

handstick vacuum cleaner and charging

base are not dirty. Clean the contacts if

necessary.

• When the handstick vacuum cleaner is

inserted into the charger, the product is

automatically switched o, should it have

still been left on by accident.

• It is normal for the charging base and

vacuum cleaner to become hot. It’s not a

cause for concern.

• The vacuum cleaner can be charged at

any time when it is not in use.

Fig.

8

The LED indicator ﬂashes in blue and

indicates the battery is being charged.

The indicator turns on steady blue,

when the battery is fully charged.

LED indicator

LED color Condition

Red ﬂashing

During operation,

when battery level

is low

Blue ﬂashing During charging

Blue steady

Charging completed.

Fully charged

IM_KVR22221_200225_V02_HR.indb 13IM_KVR22221_200225_V02_HR.indb 13 25/2/2020 3:54 PM25/2/2020 3:54 PM

Size = A5

14

English

Using handheld vacuum cleaner

Fig.

12

Press the release button to unlock the

handheld vacuum cleaner and take it

from the handstick vacuum cleaner.

Fig.

13

Press On/O button to turn on/o the

handheld vacuum cleaner.

Fig.

14

For charging, return the handheld

vacuum cleaner back to the handstick

vacuum cleaner and ensure it locks into

place.

Upholstery and Crevice nozzle

Fig.

15

For vacuuming upholstered furniture,

mattresses, cushions, curtains, etc.,

insert the upholstery nozzle into the

air intake opening of the handheld

vacuum cleaner. For vacuuming folds,

crevices and corners, insert the crevice

nozzle into the air intake opening of the

handheld vacuum cleaner.

Vacuuming

Using handstick vacuum cleaner

Fig.

9

Remove the handstick vacuum cleaner

from the charging base. Press the On/

O button to turn on. The operation

indicators on the ﬂoor noozle light up

and indicate that the brush roller is

turning.

Vacuum Power

On/O button Function/Power

1 x On/ High power

2 x Low power

3 x O

Fig.

10

During short pause while vacuuming,

the handstick vacuum cleaner can be

left standing upright anywhere in the

room. Tilt the vacuum cleaner slightly

forwards in the direction of the nozzle

until it locks into place.

Warning!

When the handstick vacuum cleaner is left

standing, it must be switched o, because

if the brush is turning while the product is

standing , it could cause damage to the ﬂoor

surface.

Fig.

11

After vacuuming, press the On/O

button to turn o the product and

return it to the charging base.

IM_KVR22221_200225_V02_HR.indb 14IM_KVR22221_200225_V02_HR.indb 14 25/2/2020 3:54 PM25/2/2020 3:54 PM

15

English

Cleaning ﬂoor nozzle

Fig.

20

The ﬂoor nozzle should be cleaned at

regular intervals. To clean it, release the

ﬂoor noozle from the handstick vacuum

cleaner. Press the unlock button to

release the brush roller.

Fig.

21

Take out the brush roller from the

nozzle. Cut through threads and hairs

wounded round the rollers using

scissors and remove them.

Note: If the wheels are blocked with threads

and hairs, use a ﬂat screw driver to remove

them carefully.

Re-assemble all of the components that have

previously been removed. Assembly is carried

out in reverse order.

Note:

• Floor nozzles are subject to a certain

amount of wear, depending on the type

of hard ﬂoors you have (e.g. rough, rustic

tiles). Therefore, you must check the

underside of the ﬂoor nozzle at regular

intervals.

• Worn undersides of ﬂoor nozzles may

have sharp edges that can damage

sensitive hard ﬂoors, such as parquet

or linoleum. Imtron does not accept any

responsibility for damage caused by worn

ﬂoor nozzles.

Cleaning and care

Warning!

• When cleaning, never use solvents or

abrasive materials, hard brushes, metallic

or sharp objects. Solvents are harmful to

human health and can attack plastic parts,

while abrasive cleaning mechanisms and

tools may scratch the surface(s).

• Never immerse any electrical parts of the

product in water or in other liquids during

cleaning. Never place it under running

water.

Emptying dust container and cleaning

ﬁlters

Note: The dust container should be emptied

every time after vacuuming.

Fig.

16

Remove the handheld vacuum cleaner

from the handstick vacuum cleaner.

Press the release button to unlock the

dust container and remove it from the

suction unit.

Fig.

17

Remove the dirt ﬁlter and textile ﬁlter

from the dust container and clean them

by tapping out or brushing out the dirt.

If heavily soiled, the dirt ﬁlter can be

washed out. Ensure to dry it completely

before re-assembly.

Fig.

18

Empty the dust container. If heavily

soiled, the dust container can be rinsed

under running water. Wipe and dry the

container with a dry cloth.

Assembly dust container and ﬁlters

Fig.

19

1

Insert the dirt ﬁlter and

2

textile ﬁlter

into the dust container.

3

Place the dust

container onto the suction unit and lock

into place.

IM_KVR22221_200225_V02_HR.indb 15IM_KVR22221_200225_V02_HR.indb 15 25/2/2020 3:54 PM25/2/2020 3:54 PM

Size = A5

16

English

Technical data

Re-chargeable vacuum cleaner

Rated voltage : 22.2 V

Vacuum power : Max. 150 W

Protection class : III

Battery charging time : 4 hrs.

Operation time (±10%) : 24 minutes at low speed/ 17 minutes at high speed

Dust container capacity : 0.5 L

Power adaptor

Manufacturer : Changzhou Taiyu Electric Co., Ltd.

Model : RKGSDC2800600

Input voltage : 100 - 240 V~

Input AC frequency : 50/60 Hz

Output voltage : 28.0 V

Output current : 0.6 A

Output power : 16.8 W

Average active eciency : 85.6 %

Eciency at low load (10 %) : 72.5 %

No-load power consumption : 0.08 W

Protection class : II

Troubleshooting

If there are any problems during operation, please refer to the following table. If problems cannot

be solved as indicated under Solution, please contact your manufacturer.

Problem Possible causes Solution

Product does not work

• Interrupted power supply

• Battery is empty

• Check the power supply

• Re-charge battery

Product cannot absorb

dust or loose suction

power

• Filters are blocked with dirt

• Dust container full, exceed

MAX marking

• Clean and wash the ﬁlters

• Empty dust container

Rolling brush does not

work

• Brush is blocked with threads

and hairs

• Cut and remove the threads

and hairs from the brush

Floor nozzle dicult to

move or get jammed

• Wheels are blocked with

threads and hair

• Remove them carefully by

using a ﬂat screwdriver

IM_KVR22221_200225_V02_HR.indb 16IM_KVR22221_200225_V02_HR.indb 16 25/2/2020 3:54 PM25/2/2020 3:54 PM

Page is loading ...

Koenic KVR 22221 Owner's manual

Related papers

Other documents