2. Lenovo
  3. G34w-30
G34w-30

Lenovo G34w-30 Owner's manual

  • I have reviewed the service manual for the Lenovo G34w-30 LCD Monitor. This document outlines a simplified step-by-step process for disassembling the device, along with the necessary tools and precautions. I'm ready to answer your questions about the disassembly procedure or technical aspects mentioned in the manual.
  • What should I do before disassembling the LCD monitor?
    What tools are needed for disassembly?
    How do I remove the stand base?
G34w-30 Simplified service manual for dismantling
Model Name: Lenovo G34w-30
Exploded Diagram
1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or press panel directly.
2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
spacer screwdriver
C/D disassembly tool
Gloves or soft cloth
3. Disassembly SOP
Unscrew the screw*4pcs to
remove the STAND-BASE ASS’Y
Tool: Screwdriver #2
Use disassembly tool to open all
the latches along the edge of the
Rear Cover.
Disconnect the connector of key
board. (Note: Don’t damage the
key board.)
Take off the tape and disconnect
the connectors.
Unscrew the screw*4 pcs to
remove the main frame.
Tool: Screwdriver #2
Remove the screw*11 pcs to
separate the panel and the middle
frame.
Tool: Screwdriver #2
The panel
The middle frame
Tear off the tape and take off the
mylar.
Remove the screw*10pcs
Tool: Screwdriver #2
Remove the pins and boards
Remove the speakers
The mainframe
Unscrew the screw*2 pcs to
remove the key board from rear
cover
Tool: Screwdriver #2
The rear cover
/