61FCMAT6EU

Lenovo 61FCMAT6EU User manual

  • Hello! I'm your chat assistant. I've reviewed the service manual for the Lenovo T24v-20 LCD monitor. This document provides a detailed guide for dismantling the monitor, including necessary precautions and tool selection. I'm ready to help with any questions you might have about the disassembly process and parts mentioned in the guide.
  • What should I do before starting disassembly?
    What tools are required for disassembly?
    How do I remove the rear cover?
T24v-20 Simplified service manual for dismantling
Model Name: Lenovo T24v-20
Exploded Diagram
1. Precaution
Please read the precaution as follows to prevent any damages to the LCD Monitor.
Make sure all power connector is removed. Be sure that the LCD Monitor is in power off status.
Prepare soft cloth and
sponge as working
platform
to place LCD monitor
horizontally.
Hold LCD by the side
carefully and DON’T touch
or press panel directly.
2. Appropriate tools
Select the Appropriate tools for disassembly and re-assembly.
Phillips screwdriver (#2)
spacer screwdriver
C/D disassembly tool
Gloves or soft cloth
3. Disassembly SOP
Put the monitor on a flat surface
(Put the EPE on under the
monitor)
Push the button to release the stand
Remove the
screw * 4pcs
Tool : Screwdriver #2
Use the C/D disassembly tool to
release Rear cover hook from
disassemble hole on bottom
Remove the chassis screw.
Remove All tape and light bar
connector
Tool : Screwdriver #2
Hold the main chassis to release
the Panel cable and overturned the
chassis
Take out the mylar sheet from
Main chassis
Remove PCB screw and Peel off
the tape of all.
Tool : Screwdriver #2
And Spacer screwdriver
Hold the PCB and release all
connector.
Remove screws to take out the
Front bezel.
Tool : Screwdriver #2
Remove screws to take out the
Camera module
Tool : Screwdriver #1
Used the force to release the knob
as red arrow showing.
Take out the camera stand and
knob.
Remove screws to take out the
Camera stand
Tool : Screwdriver #1
Remove screws to take out the
Camera hinge
Tool : Screwdriver #1
Used the force to release the
camera front and camera back
cover as red arrow showing.
/