2. Merra
  3. PTL-5026-00-BNHD-1
PTL-5026-00-BNHD-1

Merra PTL-5026-00-BNHD-1 Operating instructions

  • Hello! I've read the provided instructions for the PTL-5026-00 lamp installation. This document covers important safety precautions, and step-by-step assembly guidance, including the installation of the mounting bracket, canopy, socket ring, shade and decorative ring. It also mentions the recommended bulb type. I'm here to help if you have any questions!
  • What type of bulb is compatible with this fixture?
    What should I do before starting the installation?
    What is included in the box for a light fixture?
V20220719
ASSEMBLY
1. Prepare the wiring in your wall for the desired location of your new lamp. Prepare your junction
box (not included).
2. Unscrewthecanopybolts(D)andtakethemountingbracket(B)othecanopy(E).Connectthe
mountingbrackettoyourjunctionboxusingthemountingbolts(C).
3. Make electrical connections using the wire nuts (A).
4. Being careful that no wiring is left exposed, place the canopy against the mounting bracket and
secure it by replacing the canopy bolts.
5. Remove the socket ring (K) from the lamp holder (H). Fit the shade (I) onto the lamp holder and
secure it by replacing the socket ring.
6. Installyourbulbintothesocketonthelampholder.ThisxturehasbeenratedforoneE26bulb
(not included) up to 60W.
7. Connecttheslotofthedecorativering(J)tothepole(G)andsecureitbytighteningthelocking
nut (F).
8. Restore the power, turn on your lamp, and enjoy!
CONTACT US
Thank you for choosing our products! If you have any questions or comments,
contact us at help@cs-supportpro.com and we'll resolve your issue ASAP!
For a .pdf copy of the latest version of these instructions, use the appropriate
app on your smartphone to scan the QR code to the right.
INSTRUCTIONS
WARNING!
Read these instructions carefully prior to installation.
• Checkforelectric,gas,andplumbinglinesbeforedrillingorconsultaprofessional.
• ALWAYS cut ALLrelevantpowerbeforeinstallingalightingxtureanddonotrestore
power to the line until the lamp has been FULLY installed.
• DO NOT use with bulbs exceeding the recommended wattage.
PTL-5026-00 Rev. 19 Jul. 2022
Locking Nut (F)
JunctionBox
Wire Nut (A)
MountingBolt(C)
CanopyBolt(D)
Canopy(E)
Mounting Bracket (B)
Lamp Holder (H)
Shade (I)
DecorativeRing(J)
Socket Ring (K)
Pole(G)
/