ILuminar iLi6 User manual

iLi6
Brand
ILuminar
Model
iLi6
Type
User manual

ILuminar iLi6 is a powerful LED grow light fixture designed to provide optimal lighting for indoor plant growth. With a PPF of 1700 µmol/s and an efficacy of 2.7 µmol/J, this fixture delivers the necessary light intensity and spectrum for vigorous plant growth and development. Its passive cooling system ensures quiet operation, while its IP66 waterproof rating makes it suitable for damp or wet environments. The iLi6 can be suspended from rope ratchets or mounted to a rack, providing versatility in installation.

ILuminar iLi6 is a powerful LED grow light fixture designed to provide optimal lighting for indoor plant growth. With a PPF of 1700 µmol/s and an efficacy of 2.7 µmol/J, this fixture delivers the necessary light intensity and spectrum for vigorous plant growth and development. Its passive cooling system ensures quiet operation, while its IP66 waterproof rating makes it suitable for damp or wet environments. The iLi6 can be suspended from rope ratchets or mounted to a rack, providing versatility in installation.

USER
MANUAL
iLi6
1-877-540-5588
iluminarlighting.com
[email protected]
IL-i627FSG-120
IL-i627FSG-480
2
CONTENTS
• Observe all safety precautions (see page 10), seek the services of a
qualified/certified/licensed/insured electrician, or call ILUMINAR Lighting
technicians for assistance.
• DO NOT handle or touch the fixture while in use.
• DO NOT touch diodes or apply direct force to the diodes as this can/will
cause permanent damage.
• Connect the fixture only to the power sources of the appropriate voltage
using the correct AC plug type. Protect power cables from being pinched,
walked on, or otherwise damaged. Be especially careful where the power
cable enters the power outlet to the unit. Only connect the fixture to an
electrical outlet or extension cord of comparable standard and level
rating. Connect the fixture ONLY to the power sources of the correct
voltage using the plug received.
• The fixture should only be cleaned as directed. Always seek service for
your system by qualified service personnel if any of the following occur:
1. The fixture shows a noticeable change in performance.
2. The power-supply cord or plug is damaged.
3. The fixture has been dropped, or the exterior is damaged.
Please read this manual thoroughly prior to installing or
operating the ILUMINAR iLi6.
Pre-Install Information ........................................
Technical & Physical Specications......................
Hardware & Accessories ....................................
Connections & Hanging Instructions ....................
Mounting Instructions ..........................................
Wiring Diagram .................................................
Important Cautions & Warranty ...........................
2
3
4
5-6
7
8-9
10
1-877-540-5588
iluminarlighting.com
[email protected]
© Copyright 2021, ILUMINAR Lighting
Subject to change without notice.
iLi6 630W LED SPECTRUM
WAVELENGTH NM
LED Lighting Solution
1128 mm / 44.41”
1086 mm / 42.76”
58 mm / 2.29”
PHYSICAL SPECIFICATIONS
Length
Width
Height
Weight
1128mm
1086mm
58mm
17.6kg
44.41"
42.76"
2.29"
38.8lbs
VOLTAGE AND AMPERAGE
120V
208V
240V
277V
347V 1.79A
5.38A
3.03A
2.63A
2.27A
621W
646W
630W
631W
629W
MODEL: WATTS: 630W2.7
VOLTAGE: 347-480V
SKU: IL-i627FSG-480
120-277V
IL-i627FSG-120
Rated Voltage
Voltage Range (+/-10%)
PPF
Efficacy
Min Power Factor
THD
Crest Factor
BTU
Frequency
Dimmable
Ambient Temperature
Relative Humidity
Plug Type
Color Temperature
Color Rendering Index
Minimum Mounting Height
Emitter Cooling
Light Distribution +/- 5%
Waterproof Rating
LED Lifespan (90% of Life)
1700 µmol/s
2.7 µmol/J
0.9
< 10%
0.99
2155
50 / 60Hz
0 - 10V Controllable
0 - 35°C / 32-95°F
98%
Power Cord Sold Seperately
4000k
88
6-12”(15-30cm) to top of Canopy
Passive Cooling
125º
IP66 for Damp/Wet Conditions
36,000+ Hours
TECHNICAL SPECIFICATIONS
120-277V AC
100-277V
347-480V AC
347-480V
MOUNTING & COVERAGE
1.2m / 4'
1.2m / 4'
15-30cm / 6-12”
4
HARDWARE AND ACCESSORIES
The iLi6 can be hung from rope
ratchets or can be mounted to a
rack.
Before you begin installation,
check that you have all the
necessary parts to begin.
1 iLi6 Fixture
4 hanging rope ratchets with attached
cylindrical locks for hanging
IN THE BOX
1-877-540-5588
iluminarlighting.com
[email protected]
ASSEMBLY INSTRUCTIONS
© Copyright 2021, ILUMINAR Lighting
Subject to change without notice.
Open the package and take out the LED grow light
and place it on the table.
1
! CAUTION when handling your ILUMINAR iL Fixture.
The LED array should NOT come in contact with sharp
objects. DO NOT touch diodes or apply direct force to
the diodes as this can/will cause permanent damage.
Unfold the LED grow light xture and ensure the light output surface
faces the table.
2
7
61-877-540-5588
iluminarlighting.com
[email protected]
HANGING INSTALLATION
© Copyright 2021, ILUMINAR Lighting
Subject to change without notice.
Lift the LED xture and hang it on the long S-hooks.
5
To Suspend Mount (default), use the 4 hanging rope
ratchets that come packaged with this xture and hang
them from the ceiling.
6
Then lift the LED xture and hang it from the
rope ratchets.
7
Take out the lock-shaft and lock the attachable end cap.
3
There are two ways to mount your LED grow light xture: Suspending
Mounting (default) and Surface Mounting. Surface Mount using long
S-hooks (not provided) to hang the xture from shelving.
4
SURFACE MOUNTING INSTRUCTIONS
SUSPENDED MOUNTING INSTRUCTIONS
1-877-540-5588
iluminarlighting.com
sales@iluminarlighting.
9
8
Cable Logic Main-Line AC Extension Cable
Cable Logic Multi Joint / Junction Main-Line AC Connector
Cable Single Joint / Junction Main-Line AC Connector
Panel Mount
Panel Mount
Cable Logic Dimming Cable
Cable Logic Dimming Cable
Cable Logic Secondary AC Extension Cables
WIRING DIAGRAM
1.5m / 5ft
0.3m / 1ft
Female
Female
Male
© Copyright 2021, ILUMINAR Lighting
Subject to change without notice.
10
CAUTION
1. Leave at least one inch of space between the xture and the mounting
area for maximum performance and lifespan.
2. ALWAYS wear protective eye wear when looking directly at the diodes
to prevent eye damage.
3. The LED array should NEVER come in contact with sharp objects.
4. Do not touch or apply force to the diodes - this will cause permanent
damage.
5. Only handle, clean or move xture when it’s unplugged and
completely cool.
6. Keep the xture free of dust, debris, deposits to ensure the maximum
potential of the xture.
7. NEVER use cloth to clean the diodes. This will scratch the diodes and
could potentially break or dislodge them.
8. DO NOT use chemicals to clean the xture. Use ONLY low pressure air
or low pressure water to remove dust and debris.
9. DO NOT exceed 70% max load for breakers due to Inrush current in
LED xtures.
Please read the following list carefully prior to beginning installation.
At ILUMINAR, we stand behind our products and our technology as well
as our customers. All ILUMINAR LED xtures are backed by our 5-Year
Guarantee. Please visit our website iluminarlighting.com/warranty for
more information.
1-877-540-5588
iluminarlighting.com
[email protected]
GUARANTEE
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

ILuminar iLi6 User manual

iLi6
Brand
ILuminar
Model
iLi6
Type
User manual

ILuminar iLi6 is a powerful LED grow light fixture designed to provide optimal lighting for indoor plant growth. With a PPF of 1700 µmol/s and an efficacy of 2.7 µmol/J, this fixture delivers the necessary light intensity and spectrum for vigorous plant growth and development. Its passive cooling system ensures quiet operation, while its IP66 waterproof rating makes it suitable for damp or wet environments. The iLi6 can be suspended from rope ratchets or mounted to a rack, providing versatility in installation.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents