2. Computers & electronics
  3. Print & Scan
  4. 3D printers
  5. UNIZ
  6. Desktop 3D Printer
Desktop 3D Printer

UNIZ Desktop 3D Printer User guide

  • I've reviewed the user guide for the UNIZ 3D printer, specifically the SLASH and SLASH-c models. This document provides a quick start guide for setting up the printer, loading resin, and initiating the first print. I understand the different front button color indications that signal the printer's status during operation as well. I'm ready to answer your questions about the printer and its usage.
  • What do the different colors of the front button indicate?
    Where can I find more information and troubleshooting?
    What should I do before starting the first print?
FEEDBACK
[email protected]
FOR MORE INFORMATION
uniz.com/support
[email protected]
If you ever need help resolving an issue, please send an email to the address
STORE
uniz.com/store
To learn about other UNIZ products, including UNIZ resins, please visit our
online store.
[email protected]
Sales Team at the address above.
UNIZ Technology LLC
9400 Activity Rd Ste L, San Diego, California, 92126, United States
UNIZ Desktop 3D printer quick start guide
FRONT BUTTON COLOR GUIDE
UNIZ 3D PRINTING SYSTEM
GETTING STARTED
Green
Printer is ready for a command.
Blinking green
Data transferred. Wait for a touch conrmation.
C86 M8 Y0 K0 C0 M0 Y0 K20
Progressing green
Printing in progress.
A SLASH 3D printer
B Power Adapter
C Power Cable
D USB Cable
E Resin Tank
F
G
above to contact our Support Team.
If you have additional questions aboutant UNIZ product, please email our
Our website has extensive docementation and troubleshooting information
to solve issues quickly on you own.
Progressing blue
Data transferring in progress.
Blinking red
Printer busy(Starting up/Paused/Z axis moving).
G
A
B
CD
EF
Build Plaorm
Resin Bole
We love to hear from you. Please give us feedback.
*Slash-c DOES NOT have a resin pump or
automatic Level control & Liquid cooling system
Pull the printer out.*
Operate at room temperature (18-28°C).
Keep out of direct sunlight or other
intensive light sources.
Please keep the original box and protectors
in case of future shipping or storing.
SET-UP YOUR PRINTER
UNPACK YOUR SYSTEM
*Detailed packing list is in the box.
A
Posion the printer.
B
1. Place the printer on a leveled desk.
2. Adjust the four leveling screws under the
printer to level it. Check the leveling bubble
on the Build Platform for levelness.
Check the Build Plaorm.
C
1. Make sure the Build Platform is locked onto
the ARM firmly.
2. Turn the lock handle anticlockwise will unlock
the Platform.
Check the Resin Tank.
D
1. Turn the lock handle down will unlock
the Platform.
Load the Resin.*
E
2. Check the Resin Tank, the film should be
intact.
3. Check the protective film on the LCD.
4. Put the Resin Tank back and lock it.
1. Take the Cap off the Resin Bottle.
2. Pour the resin into Resin Tank directly.
3. Put the Caps back and close the Front Cover.
Light it up.
F
Make sure the Power Adapter is connected
firmly or the printer may reboot when print
starts with insufficient power.
Off On
1. Connect power adapter and cable.
2. Toggle the switch to ON.
3. Connect to your computer via USB cable.
START THE FIRST PRINT
Download and install UNIZ Desktop.
G
https://www.uniz.com/software
Test print.*
H
1. Open the UNIZ Desktop software.
2. Select the corresponding printer type from the
drop-down list. The USB icon on the right means
the printer has been successfully connected.
3. Choose the LIBRARY interface and load a
Natural-Peel-Mode model.
Double click
4. Choose the Slice Function and click the Slice
button. When finished, click Start.
5. Touch the front button when the light is blinking
green to begin the first print.
MAINTENANCE*
*Learn more deatils about how to print,
please check User Manual.
Always make sure the Build Plaorm and
Resin Tank are clear of debris.
J
*For more details regarding usage and maintenance, please check User Manual.
a. Paste a new film if the old one is broken.
b. Check the LCD before print. Go K if it bulges.
/