Angelo Decor Feature Fountain Operating instructions

Thank you for buyin

an An

elo Decor Feature Fountain!

We ho

ou will find these instructions hel

ful in settin

our fountain. If

ou need more

information to

erl

care for

our fountain,

lease DO NOT return the unit to

lace of

urchase.

Please visit our web site, www.an

elodecor.com, for assistance and warrant

information.

First un

ack carton carefull

, arran

arts safel

our workin

area.

This installation shows an above ground application, however you can install the unit below ground to

create a flush mount, built in look b

a hole sli

htl

lar

er than the three

lates.

Place pump in bucket and run cor through notch. Restrictor is included for fine tuning flow. Place pump outlet into tubing.

Insert tubing into pump. Attach top to middle plate. Be sure side plate lines up as shown.

Side plates set on bucket using grooves. Three plates should effect tight fit. Finish with included rocks.

Now simply fill with clean water and plug into a grounded GFCI outlet

We recommend kee

bowl 3/4 full of water to avoid

burnout.

Landscape around the unit to create your own finished look.