Angelo Decor AD97023 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD97023
Type
Operating instructions

Angelo Decor AD97023 is an elegant water feature that will add a touch of tranquility to any home or garden. With a classic design and durable construction, this fountain is sure to provide years of enjoyment. The fountain features a decorative pump cover and a bird perched on the top, adding a touch of whimsy to the design. The included rope can be wrapped around the bucket handle and top for a personalized appearance. The fountain is easy to assemble and maintain, and the pump must be fully submerged at all times to avoid burnout.

Angelo Decor AD97023 is an elegant water feature that will add a touch of tranquility to any home or garden. With a classic design and durable construction, this fountain is sure to provide years of enjoyment. The fountain features a decorative pump cover and a bird perched on the top, adding a touch of whimsy to the design. The included rope can be wrapped around the bucket handle and top for a personalized appearance. The fountain is easy to assemble and maintain, and the pump must be fully submerged at all times to avoid burnout.

Clearwater Fountain AD97023
We hope you will find these instructions helpful in setting up your product.
If you have any issues with this item, DO NOT return the unit to place of purchase.
Please visit our web site www.angelodecor.com for assistance and warranty information.
Connect the pump to the
tubing.
Arrange all the parts in
your work area.
A
djust the flow control as
needed.
Pass the power cord down
the hole (shown above)
and out the base.
Align and install the top
on to the fountain.
The tubing should pass in to the hole shown above
left and then in to the reservoir area as shown above
right.
Align the cord with the
groove at the base.
Fill with clean water and plug into a grounded GFCI outlet.
The pump must be fully submersed at all times to avoid pump burnout.
Product must be properly stored for winter.
Place the pump inside the
reservoir as shown.
Connect the pump to the
tubing.
Arrange all the parts in
your work area.
A
djust the flow control as
needed.
Pass the power cord down
the hole (shown above)
and out the base.
Align and install the top
on to the fountain.
The tubing should pass in to the hole shown above
left and then in to the reservoir area as shown above
right.
Place the decorative
pump cover over the
pump.
Hang the bucket from the
hook. The included rope can
wrapped around the bucket
handle and top for a
personalized appearance.
Place the bird on the fountain
as shown.
Align the cord with the
groove at the base.
The final assembly should look
like this
Fontaine Clearwater AD97023
Nous espérons que vous trouverez ces instructions utiles en assemblant votre produit.
Si vous avez n'importe quelles issues avec cet article, ne renvoyez pas l'unité à l'endroit de l'achat.
Veuillez visiter notre site Web www.angelodecor.com pour l'information d'aide et de garantie.
Reliez la pompe à la
tuyauterie.
Arrangez toutes les parties
dans votre zone de
manoeuvre.
Ajustez le contrôle de
flux comme nécessaire.
Passez le cordon de
secteur en bas du trou
(montré ci-dessus) et
dehors de la base.
Alignez et installez le
dessus dessus sur la
fontaine.
La tuyauterie devrait passer dedans au trou montré
ci-dessus à gauche et alors dedans au secteur de
réservoir comme montré ci-dessus bien.
Alignez la corde avec la
cannelure à la base.
Remplissez d'eau propre et branchez dans une prise de mise à terre DDFT.
La pompe doit être entièrement submersed à tout moment pour éviter d'endommager la pompe.
Le produit doit être entreposé adéquatement durant l'hiver.
L'assemblée finale devrait
ressembler à ceci
Placez la pompe à
l'intérieur du réservoir
comme montré.
Reliez la pompe à la
tuyauterie.
Arrangez toutes les parties
dans votre zone de
manoeuvre.
Ajustez le contrôle de
flux comme nécessaire.
Passez le cordon de
secteur en bas du trou
(montré ci-dessus) et
dehors de la base.
Alignez et installez le
dessus dessus sur la
fontaine.
La tuyauterie devrait passer dedans au trou montré
ci-dessus à gauche et alors dedans au secteur de
réservoir comme montré ci-dessus bien.
Placez la couverture
décorative de pompe au-
dessus de la pompe.
Accrochez le seau du
crochet. La corde incluse peut
enroulé autour de la
poignée et du dessus de
seau pour un aspect
personnalisé.
Placez l'oiseau sur la fontaine
comme montrée.
Alignez la corde avec la
cannelure à la base.
  • Page 1 1
  • Page 2 2

Angelo Decor AD97023 Operating instructions

Angelo Decor
Brand
Angelo Decor
Model
AD97023
Type
Operating instructions

Angelo Decor AD97023 is an elegant water feature that will add a touch of tranquility to any home or garden. With a classic design and durable construction, this fountain is sure to provide years of enjoyment. The fountain features a decorative pump cover and a bird perched on the top, adding a touch of whimsy to the design. The included rope can be wrapped around the bucket handle and top for a personalized appearance. The fountain is easy to assemble and maintain, and the pump must be fully submerged at all times to avoid burnout.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents