Angelo Decor Feature Fountain Operating instructions

  • Hello! I've reviewed the Angelo Decor Feature Fountain user manual and understand it provides detailed instructions on how to set up your new fountain. The manual covers installation options, assembly steps involving the pump, tubing, and plates, and provides usage guidelines. I'm ready to assist you with any questions about your fountain's setup or operation based on its contents.
  • What does the manual recommend for water level?
    Is there a way to adjust the water flow?
    What type of electrical outlet is required?
Thank you for buyin
g
an An
g
elo Decor Feature Fountain!
We ho
p
e
y
ou will find these instructions hel
p
ful in settin
g
u
p
y
our fountain. If
y
ou need more
information to
p
ro
p
erl
y
care for
y
our fountain,
p
lease DO NOT return the unit to
p
lace of
p
urchase.
Please visit our web site, www.an
g
elodecor.com, for assistance and warrant
y
information.
First un
p
ack carton carefull
y
, arran
g
in
g
p
arts safel
y
in
y
our workin
g
area.
This installation shows an above ground application, however you can install the unit below ground to
create a flush mount, built in look b
y
di
gg
in
g
a hole sli
g
htl
y
lar
g
er than the three
p
lates.
Place pump in bucket and run cor through notch. Restrictor is included for fine tuning flow. Place pump outlet into tubing.
Insert tubing into pump. Attach top to middle plate. Be sure side plate lines up as shown.
Side plates set on bucket using grooves. Three plates should effect tight fit. Finish with included rocks.
Now simply fill with clean water and plug into a grounded GFCI outlet
We recommend kee
p
in
g
bowl 3/4 full of water to avoid
p
um
p
burnout.
Landscape around the unit to create your own finished look.
/