Kenwood KVT-739DVD User manual

MONITOR WITH DVD RECEIVER

KVT-719DVD

KVT-739DVD

INSTRUCTION MANUAL

Take the time to read through this instruction manual.

Familiarity with installation and operation procedures will help you obtain the best

performance from your new DVD-receiver.

For your records

Record the serial number, found on the back of the unit, in the spaces designated on the

warranty card, and in the space provided below. Refer to the model and serial numbers

whenever you call upon your Kenwood dealer for information or service on the product.

Model KVT-719DVD/KVT-739DVD Serial number

US Residence Only

Register Online

Register your Kenwood product at

www.Kenwoodusa.com

2 KVT-719DVD/KVT-739DVD

Contents

USB Device Control 41

Functions When Displaying the Easy

Control Panel 41

Functions While Displaying the Control

Screen 41

USB List 42

Folder Select 43

iPod Control 38

Connecting an iPod 38

Functions When Displaying the Easy

Control Panel 38

Functions While Displaying the Control

Screen 39

iPod List 40

Video File/Picture File Watching 29

Function During Playback Screen 29

Functions When Displaying the Easy

Control Panel 29

Functions While Displaying the Control

Screen 30

Picture Control 31

Folder Select 31

Watching DVD/VCD 18

Functions During the Playback Screen 18

Functions When Displaying the Easy

Control Panel 19

Functions While Displaying the Control

Screen 19

DVD Disc Menu 20

VCD Zoom Control 22

Direct Search 22

Music Disc & Audio File Listening 23

Functions When Displaying the Easy

Control Panel 23

Functions While Displaying the Control

Screen 24

Set Disc Name 27

Folder Select (Function of Audio File) 27

Disc Select (Function of Disc Changer) 28

Direct Search 28

TV Watching 44

Functions During TV Screen 44

Functions When Displaying the Easy

Control Panel 44

Functions While Displaying the Control

Screen 45

Seek Mode 45

Auto Memory 46

Manual Memory 46

Preset Select 46

Set Station Name 47

Direct Search 47

Video Watching 48

Functions When Displaying the Easy

Control Panel 48

Satellite Radio Control 49

Functions When Displaying the Easy

Control Panel 49

Functions While Displaying the Control

Screen 49

Channel Search 50

Channel Memory 51

Direct Channel Search 51

How to read this manual 4

Safety precautions 6

Notes 7

Radio Listening 32

Functions When Displaying the Easy

Control Panel 32

Functions While Displaying the Control

Screen 32

Seek Mode 33

Auto Memory 34

Manual Memory 34

Preset Select 35

Radio Text 35

Set Station Name 36

Direct Search 36

Traffic Information 37

Search for Program Type 37

Basic Operations 12

English 3

HD Radio Control 52

Functions When Displaying the Easy

Control Panel 52

Functions While Displaying the Control

Screen 52

Seek Mode 53

Auto Memory 54

Manual Memory 54

DVD Language Codes 97

Specifications 98

Source Select 55

Displaying the Control Screen 55

Muting Audio Volume upon Reception

of Phone call 56

Muting Audio Volume upon Reception of

Phone Call 56

Character Entry 57

How To Use the Character Entry screen 57

Screen Control 58

Hands Free Unit Control 59

Control Screen Function 59

When Called 60

When Dialing 60

Quick Dialing 61

Calling by Phone Book 61

Redialing 63

Setting up the Hands-Free Phone 64

Selecting a Hands-Free Phone 64

Deleting the Hands-Free Phone 65

Setup Menu 66

Audio Setup 66

Crossover Network Setup 67

DVD Setup 67

Language Setup 68

Parental Level Setup 69

DivX Setup 70

Software Information 70

iPod Setup 70

System Setup 71

AV Interface Setup 72

User Interface 73

Entering background 75

Background Delete 75

Background Select 76

Touch panel Adjustment 76

Clock Setup 77

Monitor Setup 78

Security Code Setup 80

Deactivating Security Code 81

SAT ESN Watch Setup 82

Setup Memory 82

Audio Control 84

Audio Control menu 84

Audio Control 84

Equalizer Control 85

Tone setup 86

Zone Control 86

Remote Controller 88

Battery installation 88

Remote Controller mode switch 88

Common operations (AUD mode) 89

DVD/VCD/CD/Audio files (DVD mode) 90

TV (TV mode) 91

Radio (AUD mode) 92

Help? Troubleshooting 94

Help? Error 96

4 KVT-719DVD/KVT-739DVD

How to read this manual

The above operation example with the mark

differs from the actual operation.

Seek mode

Sets a station selection.

The mode is switched in following order each

time you touch the button.

Display Setting

"AUTO1" Tunes in a station with good reception

automatically.

"AUTO2" Tunes in stations in memory one after another.

"MANU" Switches to the next frequency manually.

Manual Memory

Stores the current receiving station in memory.

1 Select a station you wish to store in

memory

2 Store in memory

Next page 

This manual uses illustrations to explain its

operations.

The displays and panels shown in this manual

are examples used to provide clear explanations

of the operations.

For this reason, they may be different from the

actual displays or panels used, or some display

patterns may be different.

English 5

6 KVT-719DVD/KVT-739DVD

2WARNING

To prevent injury or fire, take the following

precautions:

• To prevent a short circuit, never put or leave any

metallic objects (such as coins or metal tools) inside

the unit.

• Do not watch or fix your eyes on the unit’s display

when you are driving for any extended period.

• Mounting and wiring this product requires skills and

experience. For safety’s sake, leave the mounting

and wiring work to professionals.

2CAUTION

To prevent damage to the machine, take

the following precautions:

• Make sure to ground the unit to a negative 12V DC

power supply.

• Do not install the unit in a spot exposed to direct

sunlight or excessive heat or humidity. Also avoid

places with too much dust or the possibility of

water splashing.

• Do not place the faceplate (and the faceplate case)

in areas exposed to direct sunlight, excessive heat

or humidity. Also avoid places with too much dust

or the possibility of water splashing.

• To prevent deterioration, do not touch the terminals

of the unit or faceplate with your fingers.

• Do not subject the faceplate to excessive shock, as

it is a piece of precision equipment.

• When replacing a fuse, only use a new fuse with

the prescribed rating. Using a fuse with the wrong

rating may cause your unit to malfunction.

• Do not apply excessive force to the open faceplate

or place objects on it. Doing so will cause damage

or breakdown.

• Do not use your own screws. Use only the screws

provided. If you use the wrong screws, you could

damage the unit.

Safety precautions

Do Not Load 3-in. CDs in the CD slot

If you try to load a 3 in. CD with its adapter into the

unit, the adapter might separate from the CD and

damage the unit.

About CD players/disc changers connected

to this unit

Kenwood disc changers/ CD players released in 1998

or later can be connected to this unit.

Refer to the catalog or consult your Kenwood dealer

for connectable models of disc changers/ CD players.

Note that any Kenwood disc changers/ CD players

released in 1997 or earlier and disc changers made by

other makers cannot be connected to this unit.

Connecting unsupported disc changers/CD players to

this unit may result in damage.

Set the "O-N" Switch to the "N" position for the

applicable Kenwood disc changers/ CD players.

The functions you can use and the information

that can be displayed may differ depending on the

models being connected.

¤

• You can damage both your unit and the CD changer if you

connect them incorrectly.

Lens Fogging

When you turn on the car heater in cold weather,

dew or condensation may form on the lens in the

CD player of the unit. Called lens fogging, this

condensation on the lens may not allow CDs to play.

In such a situation, remove the disc and wait for the

condensation to evaporate. If the unit still does not

operate normally after a while, consult your Kenwood

dealer.

English 7

• If you experience problems during installation,

consult your Kenwood dealer.

• When you purchase optional accessories, check

with your Kenwood dealer to make sure that they

work with your model and in your area.

• We recommend the use of <Security Code Setup>

(page 80) to prevent theft.

• The characters conforming to ISO 8859-1 character

set can be displayed.

• The RDS or RBDS feature won’t work where the

service is not supported by any broadcasting

station.

• The illustrations of the display and the panel

appearing in this manual are examples used to

explain more clearly how the controls are used.

Therefore, what appears on the display in the

illustrations may differ from what appears on the

display on the actual equipment, and some of the

illustrations on the display may be inapplicable.

How to reset your unit

• If the unit fails to operate properly, press the Reset

button. The unit returns to factory settings when

the Reset button is pressed.

• Remove the USB device before pressing the Reset

button. Pressing the Reset button with the USB

device installed can damage the data contained in

the USB device. For how to remove the USB device,

refer to <Playing a USB device> (page 15).

• Press the reset button if the disc auto changer fails

to operate correctly. Normal operation should be

restored.

Reset button

Cleaning the Unit

If the faceplate of this unit is stained, wipe it with a

dry soft cloth such as a silicon cloth.

If the faceplate is stained badly, wipe the stain off

with a cloth moistened with neutral cleaner, then

wipe it again with a clean soft dry cloth.

¤

• Applying spray cleaner directly to the unit may affect its

mechanical parts. Wiping the faceplate with a hard cloth

or using a volatile liquid such as thinner or alcohol may

scratch the surface or erases characters.

TV tuner that can be connected to this unit

• KTC-V500N

• KTC-V300N

Navigation units that can be connected to

this unit

• KNA-G510

• KNA-DV4100

• KNA-DV3100

• KNA-DV2100

About iPod that can be connected to this

unit

You can control an iPod from this unit by connecting

an iPod (commercial product) with Dock connector

using an optional accessory iPod connection cable

(KCA-iP300V).

The following iPods can be controlled from this unit.

Controllable iPod Software version

iPod nano iPod nano software 1.2

iPod nano second generation iPod nano software 1.1.1

iPod with video iPod software 1.2

You must update your iPod software if its version is

less than the above.

The iPod software version is displayed in the "Version"

field by pressing the iPod MENU button and then

selecting "Set", "Information". The latest iPod software

updater can be downloaded from the Apple

Computer web site.

The character set supported by this unit is ISO08859-

1.

Characters that cannot be displayed correctly appear

as "*".

By connecting your iPod to this unit with an optional

accessory iPod connection cable (KCA-iP300V), you

can supply power to your iPod as well as charge it

while playing music. However, the power of this unit

must be on.

Notes

8 KVT-719DVD/KVT-739DVD

Handling CDs

• Do not touch the recording surface of the CD.

• Do not stick tape etc. on the CD, or use a CD with

tape stuck on it.

• Do not use disc type accessories.

• Clean from the center of the disc and move

outward.

• When removing CDs from this unit, pull them out

horizontally.

• If the CD center hole or outside rim has burrs,

use the CD only after removing the burrs with a

ballpoint pen etc.

CDs that cannot be used

• CDs that are not round cannot be used.

• CDs with coloring on the recording surface or CDs

that are dirty cannot be used.

• This unit can only play the CDs with

.

This unit may not correctly play discs which do not

have the mark.

• You cannot play a CD-R or CD-RW that has not

been finalized. (For the finalization process refer to

your CD-R/CD-RW writing software, and your CD-

R/CD-RW recorder instruction manual.)

List of playable discs

Disc

types

Standard Support Remark

DVD DVD Video

‡

DVD Audio ×

DVD-R

‡

MP3/WMA/AAC/JPEG/

MPEG/DivX Playback

Multi-border/Multisession/

(Playback depends on

authoring conditions)

Compatible with 8-cm (3

inch) discs

DVD-RW

‡

DVD+R

‡

DVD+RW

‡

DVD-R DL (Double layer)

‡

Only video format

DVD+R DL (Double layer)

‡

DVD-RAM ×

CD Music CD

‡

CD-TEXT/8-cm (3 inch)

discs supported.

CD-ROM

‡

MP3/WMA/AAC/JPEG/

DivX playback

Multisession supported

Packet write not supported.

CD-R

‡

CD-RW

‡

DTS-CD

‡

Video CD (VCD)

‡

Super video CD ×

Photo CD ×

CD-EXTRA

%

Only music CD session can

be played.

HDCD

%

Sound quality of normal

CD music

CCCD ×

Others Dualdisc ×

Super audio CD

%

Only CD layer can be

played.

‡

: Playback is possible.

% : Playback is partly possible.

× : Playback is impossible.

⁄

• DivX file must have the extension ".divx", ".div", or ".avi".

• When buying DRM enabled contents, check the

Registration Code in the <DivX Setup> (page 70).

Registration Code changes each time a file with the

displayed Registration Code is played to protect against

copying.

Notes

English 9

Region codes in the world

The DVD players are given a region code according to the country or area it is marketed, as shown in the

following map.

Operation regulatory marks

With this DVD, some functions of this unit such as the

play function may be restricted depending on the

location where the DVD is playing. In this case, the

following marks will appear on the screen. For more

information, refer to the disc manual.

Prohibition Mark

Discs with limited period of use

Do not leave discs with a limited period of use in this

unit. If you load an already expired disc, you may not

be able to remove it from this unit.

1

2

4

1

5

4

5

2

1

2

6

3

DVD disc marks

Symbol Description

ALL

Indicates a region number. The discs with this mark can

be played with any DVD player.

8

Indicates the number of audio languages recorded. Up

to 8 languages can be recorded in a movie. You can

select a favorite language.

32

Indicates the number of subtitled languages recorded.

Up to 32 languages can be recorded.

9

If a DVD disc has scenes shot from multiple angles, you

can select a favorite angle.

16:9 LB

Indicates the type of screen for the image. The left mark

indicates that a wide image picture (16:9) is displayed

on a standard TV set screen (4:3) with a black band at

both the top and bottom of the screen (letter box).

10 KVT-719DVD/KVT-739DVD

Notes

About Audio files

• Playable Audio file

AAC-LC (.m4a), MP3 (.mp3), WMA (.wma)

⁄

• If music of normal CD and other playback systems are

recorded in the same disc, only the playback system

recorded at the first setout is played.

• Playable AAC file

".m4a" file encoded by AAC-LC format.

Transfer bit rate: 16 – 320 kbps

Sampling frequency: 16 – 48 kHz

• Playable MP3 file

MPEG 1/2 Audio Layer 3 file

Transfer bit rate: 8 – 320 kbps

Sampling frequency: 8 – 48 kHz

• Playable WMA file

The file in accordance with Windows Media Audio

(Except for the file for Windows Media Player 9 or

after which applies the new functions)

Transfer bit rate: 48 – 192 kbps

Sampling frequency: 32, 44.1, 48 kHz

• Playable disc media

CD-R/RW/ROM, DVD±R/RW

• Playable disc file format

ISO 9660 Level 1/2, Joliet, Romeo, Long file name.

• The maximum number of characters for display

(CD-R/RW/DVD±R/RW)

File/Folder name: 128 characters

MP3 ID3 Tag version 1.x: 30 characters

• Limitation of structure for the file and the

folder (CD-R/RW/DVD±R/RW/USB device)

Maximum number of directory levels: 8

Maximum number of folders: 254

Maximum number of files per folder: 255

Maximum number of files per playlist: 7000 (USB

device)

• Playable USB device

USB mass storage class, iPod with KCA-iP300V

• Playable USB device file system

FAT16, FAT32

• About the Connection of the USB device

If an extension cable is needed for USB device

connection, usage of the CA-U1EX (option) is

recommended.

Normal playback is not guaranteed when a cable

other than the USB compatible cable is used.

Connecting a cable whose total length is longer

than 5 m can result in abnormal playback.

Although the audio files are complied with the

standards listed above, the play maybe impossible

depending on the types or conditions of media or

device.

• Playing order of the Audio file

In the example of folder/file tree shown below, the

files are played in the order from to .

CD

v



()

<: Folder

v: Audio 



v



v

v

v.



v

Folder

Audio file

The Audio file plays in the order which is written by CD

writing software. You may be able to set the playing order

by writing the play sequence numbers such as "01" to "99"

at the beginning of the file name.

Audio files are played in the order the files are written. You

can specify the order of playback by numbering files in a

folder and writing them by folder. (USB device)

⁄

• In this manual, the word "USB device" is used for flash

memories and digital audio players which work as mass-

storage-class devices.

• "iPod" in this manual refers to iPod connected with KCA-

iP300V (Optional accessory). iPod connected with KCA-

iP300V can be controlled from this unit. iPods that can be

connected to KCA-iP300V are iPod nano and iPod with

video. If you connect an iPod with commercially available

USB cable, it is treated as a mass storage class device.

• For the supported formats and types of USB device, refer to

www.kenwood.com/usb/.

• Attach the correct extension for the Audio file (AAC: ".M4A",

MP3: ".MP3", WMA: ".WMA")

• Do not attach the extensions to files other than the Audio

file. If the extension is attached, the file, which is not the

Audio file, will play and outputs a loud noise, causing

damage to the speaker.

• The files with copy protection cannot be played.

• The unit may not be compatible with upgrade of

compression format standard and additional specifications.

• CD-RW discs which are quick formatted by the writing

software cannot be used.

• When recording to the maximum CD-R/RW media capacity

at once, the writing software is set to "Disc at once".

• File/Folder name is the number of the characters including

the extensions.

• This unit can display the following versions of MP3 ID3 tag:

version 1.0/ 1.1/ 2.2 (USB device)/ 2.3 (USB device)

• AAC ID3 Tag cannot be displayed.

• Contact the sales agent as to whether your USB device

conforms to the USB mass storage class specs.

English 11

• Using an unsupported USB device can result in abnormal

playback or display of the audio file.

Even if you use the USB device conforming to the above

specs, audio files cannot be played normally depending on

the type or condition of the USB device.

• Do not leave the USB device in the vehicle for a long time.

It can deform or damage due to direct sunlight, high

temperature, etc.

About Video files

Acceptable video files

• Format: MPEG1, MPEG2, DivX

• Picture size:

MPEG1: 320 × 240, 352 × 240

MPEG2: 640 × 480, 704 × 480

DivX: 352 x 240, 352 x 288, 720 x 450, 720 x 576

• Audio format:

MPEG1/2: MPEG Audio Layer 2

DivX: MP3, Dolby Digital

• Audio sampling frequencies: 32/ 44.1/ 48 kHz

• Audio bit rate: 32–384 kbps (Only constant bit

rates)

Extensions

Video files must have one of the following extensions:

mpg, mpeg, mpe, m1v, m2v

Disc formats, file and folder names and playing order

are the same as those for audio files. Refer to <About

Audio files> (page 10).

About Picture files

Acceptable picture files

• Format: JPEG

• Baseline format:

Up to a maximum of 8192(W) × 7680(H) pixels

• Progressive format:

Up to a maximum of 1600(W) × 1200(H) pixels

⁄

• Enlarges and reduces images up to the size shown above

to fit to the screen.

• The picture files with information attached (such as Exif)

may not be displayed or operated (e.g.: rotation display)

properly.

Extensions

Picture files must have one of the following

extensions:

jpg, jpeg, jpe

Acceptable discs, disc formats, file and folder names

and playing order are the same as those for audio

files. Refer to <About Audio files> (page 10).

About USB device

• Install the USB device in the place where it will not

prevent you from driving your vehicle properly.

• You cannot connect a USB device via a USB hub.

• Take backups of the audio files used with this unit.

The files can be erased depending on the operating

conditions of the USB device.

We shall have no compensation for any damage

arising out of erasure of the stored data.

• No USB device comes with this unit. You need to

purchase a commercially available USB device.

Use of "DualDisc"

When playing a "DualDisc" on this unit, the surface

of the disc that is not played may be scratched

while the disc is inserted or ejected. Since the music

CD surface does not conform to the CD standard,

playback may be impossible.

(A "DualDisc" is a disc with one surface containing

DVD standard signals and the other surface

containing music CD signals.)

About DivX

DivX is a popular media technology created by DivX,

Inc. DivX media Files contain highly compressed

video with high visual quality that maintains a

relatively small file size. DivX files can also include

advanced media features like menus, subtitles, and

alternate audio tracks. Many DivX media files are

available for download online, and you can create

your own using your personal content and easy-to-

use tools from DivX.com.

About DivX Certified

DivX Certified products are officially tested by the

creators of DivX and guaranteed to play all versions

of DivX video, including DivX 6. Certified products

qualify for one of several DivX Profiles that designate

the type of video the product supports, from

compact portable video to high-definition video.

Basic Operation

Common operation

12 KVT-719DVD/KVT-739DVD

Basic Operations

12 KVT-719DVD/KVT-739DVD

When the monitor is open

When the monitor is closed

Open/Close the monitor

Press to open or close the monitor panel.

• Do not touch the moving components when you are opening or closing the monitor. If you touch the moving

components, you may be hurt or the equipment may be damaged.

• Do not try to open or close the monitor by hand.

⁄

• You can automatically open or close the monitor when you turn on or off the ignition key (page 78).

• If the monitor movement is stopped by the shift lever or another obstacle when the monitor is opened, this movement

is canceled by the safety function. If an obstacle is pinched by the monitor when closed, the monitor movement is also

canceled by the safety function. If it has occurred, remove the obstacle and press the [OPEN/CLOSE] button again.

B

A

B

EC

D

B

F

G

H

I

J

English 13English 13

Play/ Pause

Press [38] button once to pause.

Press again to resume playing.

G

Select a chapter/scene/track/frequency

Move control knob

Î

to the right or left.

Selects a music or chapter, track, or frequency.

D

Select a band/folder

Move control knob

Î

up to change to the

radio bands to FM1/2/3 or next folder/disc.

Move control knob

Î

downwards to change

the radio band to AM or previous folder/disc.

D

Fast scan forward/backward

Press [¡] button and hold it for fast scanning

forward through the track.

Press [1] button and hold it for fast scanning

backward through the track.

H

Turns power ON/OFF

Press the button to turn on the power.

When the button is pressed and held down for

1 second or more, the power is turned off.

C

Adjusts the volume

A

Attenuates the volume

Press it again to cancel muting.

I

Playing a disc

When you load a disc into disc loading slot

Ô

, the disc starts playing.

If a menu appears, when playing a video disc, select the desired item.

⁄

• See <List of playable discs> (page 8) for a list of supported discs and formats.

Remove a disc

Press [0] (Eject)

button

‰

.

JE

Stop/ play

Press [7] button

Ï

to stop playing.

Press [38] button

Ì

to resume playing from

the previous interrupted position.

GF

Next page 3

14 KVT-719DVD/KVT-739DVD

Basic Operations

B

A

Switches the video source

The video source switches in the following order each time you press the button.

Built-in Disc Player

TV

Video

iPod

Rear Camera

Navigation

You can also turn off the video display by pressing the button longer than 1 second.

When you press the button again, the previous video display comes back on.

⁄

• The Rear view camera video is displayed when the vehicle's gear is in "Reverse".

• Set the "NAVIGATION" of the <AV Interface Setup> (page 72) to "RGB"/"AV-IN" to display the Navigation video.

A

English 15

Playing a USB device

When connecting a USB device, playback starts automatically.

Removing the USB device

Press on the USB control screen to enter the USB suspend mode, and then remove the USB

device. Refer to <USB Device Control> (page 41).

¤

• Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device.

⁄

• If the USB source is selected when a USB device is not connected, "No Device" is displayed.

• When the playback is stopped and then restarted, the playback will start from the point where it was stopped at the last

time. Even if the USB is removed and connected again, the playback will start from the last stopped point unless the

contents in the USB device is changed.

• Make sure that the USB device is connected firmly.

Switches the audio source

The audio source is switched in the following order each time you press the button.

SAT

TUNER or HD Radio

Build-in Disc Player

USB device

iPod

TV

Video

External Disc Player

AUX EXT

Navigation

Standby

iPod

VIDEO

TV

Receives FM/AM broadcast. (page 32)

Plays back the disc inserted in an external player, such as a CD changer (optional accessory).

(page 23)

Outputs a sound signal input to the external AUX terminal (optional accessory).

Although nothing is played back, the clock etc are displayed.

⁄

• You cannot switch to a source that is not connected or inserted.

• You can also play audio files, video files, and picture files with the Built-in Disc Player. Refer to <List of playable discs>

(page 8) for the type and format of these media.

• It is necessary to set "NAVIGATION Source" of <AV Interface Setup> (page 72) to "On" to add Navigation as an audio

source that can be selected with the [SRC] button.

B

Basic Operation

Common operation

16 KVT-719DVD/KVT-739DVD16 KVT-719DVD/KVT-739DVD

Basic Operations

Switches the function screen

The function control screen switches in the following order each time you press the button.

Picture & Easy Control Panel

Source Control Screen

Picture Panel (OFF)

The following buttons are always displayed on the source control screen.

C

1 Displays the Source Select screen. (page 55)

2 Returns to the Source Control screen.

3 Displays the Audio Control Menu screen. (page 84)

4 Displays the SETUP Menu screen. (page 66)

5 Adjusts the Volume.

6 Clock display

⁄

• Touch displayed at bottom right of various screens to return to

the original screen.

2

3

4

5

6

1

5

B

A

C

D E

English 17English 17

Screen Setup

Press the button.

Displays the Screen Control Screen (page 58).

D

Switches Screen Mode

Press the button to switches the screen mode.

(page 78)

The DVD Disc Menu screen appears when you

press the button more than 1 second. (page

20)

⁄

• DVD Disc Menu is not available when the top menu of

the DVD is shown.

E

Switches Seek Mode

Press the butotn

to selects the Seek mode. (see

page 33, 45, 53 for the <Seek Mode>)

B

Switches AV OUT source

Switches the source that is output at the AV

OUTPUT terminal when it is pressed more than

1 second.

C

Theft Deterrent Protection panel

The protection panel of the unit can be

detached and taken with you, helping to deter

theft.

Removing the Protection panel

Press the Release button

Å

. Drawing the

protection panel to left side pull it to forward

and remove it.

¤

• Close the monitor first, then remove or attach the

protection panel.

• After you have removed the protection panel, you

cannot operate the receiver.

• After you have removed the protection panel, you can

flash the burglar alarm lamp (page 80).

Reattaching the Protection panel

Place the right end of the protection panel

onto hooks and push it until clicked and

locked. Push the protection panel in until it

clicks. The protection panel is locked in place,

allowing you to use the unit.

Two hooks

A

18 KVT-719DVD/KVT-739DVD

You can play DVD/VCD using various functions.

• For the basic method of how to watch DVD/VCD, refer to <Basic Operations> (page 12).

• Set the remote controller mode switch to "DVD" mode before starting operation, refer to <Remote Controller mode switch>

(page 88).

Functions During the Playback Screen

Basic functions are available even when the

playback screen is displayed.

Display the playback screen.

or

DVD playback screen

1 2 3

5 4

6

7

1 Title Number Display

2 Chapter Number Display

3 Play Time Display

4 Forward Chapter Search Area

Selects the next chapter.

5 Backward Chapter Search Area

Selects the previous chapter.

6 DVD Disc Menu Control Buttons Area

Displays the Disc Menu Control buttons

(page 20).

7 Information Display Button Area

Watching DVD/VCD

VCD playback screen

8 9

11 10

12

13

8 Scene/Track Number Display

9 Play time Display

p Forward Scene/Track Search Area

Selects the next scene (when PBC is On) or

track (when PBC is Off ).

q Backward Scene/Track Search Area

Selects the previous scene (when PBC is On)

or track (when PBC is Off ).

w Zoom Control Button Area

Displays the Zoom Control buttons (page

22).

e Information Display Button Area

⁄

• The information display is cleared automatically after

approximately 5 seconds. Also, the information can be

displayed automatically when it is updated.

English 19

Functions When Displaying the Easy

Control Panel

Displays a floating control panel in the screen.

1

2 3 4

5

3 4

6

1 Switches the source.

2 Stops playing.

When pressed twice, the disc is played from

its beginning when you play it in the next

time.

3 Fast Forwards or Fast Backwards.

4 Chapter Search (during DVD play)

Searches for a chapter.

Scene/Track Search (during VCD play)

Selects a scene (when PBC is On) or a track

(when PBC is Off ).

5 Plays or pauses.

6 Displays the Screen Control screen.

Refer to <Screen Control> (page 58).

⁄

• The Easy Control Panel is hidden when you touch a

central part of the monitor.

Next page 3

Functions While Displaying the Control

Screen

Switches to control screen to use various playback

functions.

1

5

6

8 9

11

13

10

14

15

2

3

4

7

2

4

6

16

12

20 KVT-719DVD/KVT-739DVD

Watching DVD/VCD

When playing a VCD

17

9

1 Ejects the disc from the built-in disc player.

2 Fast Forwards or Fast Backwards.

3 Stops playing.

When pressed twice, the disc is played from

its beginning when you play it in the next

time.

4 Selects a chapter, a scene or a track.

When the DVD-VIDEO/VCD is paused, touch

this button to start single-frame stepping.

5 Plays or pauses.

6 Slow Forwards or Backwards. (during DVD

play)

7 Switches the button display.

8 Switches the Repeat Play operations in the

following sequence.

DVD: Title Repeat, Chapter Repeat, Repeat

Off

VCD: Track Repeat, Repeat Off (Available

when the PBC is off )

9 Switches the play time display in the

following sequence.

DVD: Chapter, title, remaining titles

VCD: Track, disc, remaining discs (Effective

only when the PBC function is off )

p Title Number Display (during DVD play)

q Chapter/Scene/Track Number Display

w Play Mode Display

e Play Time Display

r Volume Label Display

When is appeared, the text display is

scrolled by pressing it.

t Function Indicator

y Appears when a disc is inserted.

u Turns the PBC function of VCD On or Off.

(only when VCD Ver 2.0 is in use)

DVD Disc Menu

Selects an option from the DVD Disc Menu.

1 Display the Disc Menu Control screen

1

6

8

5

7

2

34

3

33

1 Calls the Menu.

2 Returns to the Disc Menu screen.

3 Selects a menu option.

4 Enters your menu selection.

5 Returns to the previous menu screen.

6 Displays the Top Menu.

7 Highlight Control.

8 Clears the Disc Menu Control.

Page is loading ...

Kenwood KVT-739DVD User manual

This manual is also suitable for

Kenwood KVT-739DVD User manual

Related papers

Other documents