Vitek VT-P2EX User manual

Vitek
Brand
Vitek
Model
VT-P2EX
Category
PoE adapters
Type
User manual

Vitek VT-P2EX is a compact Gigabit PoE extender that can be used to extend the range of PoE and Ethernet by an additional 100 meters. It is compatible with 10/100/1000Mbps Ethernet and 10/100/1000 Mbps half/full duplex PassThrough Data Rates. The VT-P2EX is also compatible with IEEE802.3af and IEEE802.3at PoE standards, and can provide up to 22W of power to connected devices.

The VT-P2EX is easy to install and use, and does not require any additional power supply. It is also compact and wall-mountable, making it ideal for use in a variety of applications.

Some possible use cases for the VT-P2EX include:

Vitek VT-P2EX is a compact Gigabit PoE extender that can be used to extend the range of PoE and Ethernet by an additional 100 meters. It is compatible with 10/100/1000Mbps Ethernet and 10/100/1000 Mbps half/full duplex PassThrough Data Rates. The VT-P2EX is also compatible with IEEE802.3af and IEEE802.3at PoE standards, and can provide up to 22W of power to connected devices.

The VT-P2EX is easy to install and use, and does not require any additional power supply. It is also compact and wall-mountable, making it ideal for use in a variety of applications.

Some possible use cases for the VT-P2EX include:

VITEK
VITEK
FEATURES
• Compatible with 10/100/1000Mbps Ethernet
• 10/100/1000 Mbps half/full duplex PassThrough Data
Rates
• Compatible with IEEE802.3af and IEEE802.3at
• Extends the range of PoE and Ethernet an additional 100
meters
• No additional power supply required
• Automatically detects and protects PoE equipment from
incorrect installation
• Full-rate network throughout the whole extended distance
• Compact size, Wall-Mountable design
• Easy plug-and-play installation
VT-P2EX
Compact Gigabit
PoE Extender
2
Maximum Distances for Power Sources
Multiple PoE Extenders can be connected every 328’ to obtain greater
distances.The actual figures depend on operating conditions.The range is
over 24AWG or heavier Cat-5e or Cat-6 cable except where specified.
Examples for medium power PoE Devices (that are PoE Class 2, or require
under 6 watts)
PoE Source
PoE switch
(802.3af,Output
voltages 50V)
15W mid-span
(802.3af,Output
voltages 50V)
PoE+ switch
(802.3at,Output
voltages 50V)
30W mid-span
(802.3at,Output
voltages 50V)
Maximum Distances
984.25’ 984.25’
984.25’ 984.25’
Examples for full power PoE Devices (that are PoE Class 0 or 3, or require
under 12 watts)
PoE Source
PoE switch
(802.3af,Output
voltages 50V)
15W mid-span
(802.3af,Output
voltages 50V)
PoE+ switch
(802.3at,Output
voltages 50V)
30W mid-span
(802.3at,Output
voltages 50V)
Maximum Distances
656.17’ 656.17’
984.25’ 984.25’
Examples for PoE+ Devices (that are PoE Class 4 that under 22 watts,
or 802.3at compliant)
PoE Source
PoE switch
(802.3af,Output
voltages 50V)
15W mid-span
(802.3af,Output
voltages 50V)
PoE+ switch
(802.3at,Output
voltages 50V)
30W mid-span
(802.3at,Output
voltages 50V)
Maximum Distances
Not applicable
Not applicable
656.17’ 656.17’
3
(888) VITEK-70 | WWW.VITEKCCTV.COM
28492 Constellation Road Valencia, CA 91355
VT-P2EX Specifications
Channels
Pass-Through Data Rates
Power over Ethernet input
Power over Ethernet Output
Indicators
Connectors
Network cables
Mounting
Operating Environment
Regulatory Compliance
Dimensions
1
10/100/1000 Mbps half/full duplex
PinAssignment and Polarity: Both 1/2 (-), 3/6 (+) and 7/8 (-), 4/5 (+)
PinAssignment and Polarity: 1/2 (-), 3/6 (+) Output Power: up to 22W
LED RJ45 Connector Power indicator: PoE enabled Network indicator: Link/Act
Shielded RJ-45, EIA568Aand 568B
Category 5 (or higher)
Wall of shelf
14-113F (-10~45c) / 10% ~ 90% RH
IEEE 802.3af (PoE), IEEE 802.3at (PoE+)
5.71” x 2.36” x 1.57” (145mm x 60mm x 40mm)
Compact Gigabit PoE Extender
Preliminary Specifications:
VT-P2EX
28492 CONSTELLATION ROAD VALENCIA, CA 91355
WWW.VITEKCCTV.COM
LIMITED PRODUCT WARRANTY
VITEK products carry a three (3) year limited warranty. VITEK warrants
to the purchaser that products manufactured by VITEK are free of any
rightful claim of infringement or the like, and when used in the manner
intended, will be free of defects in materials and workmanship for a
period of three (3) years, or as otherwise stated above, from the date of
purchase by the end user. This warranty is nontransferable and extends
only to the original buyer or end user customer of a VITEK Authorized
Reseller.
The product must have been used only for its intended purpose, and
not been subjected to damage by misuse, willful or accidental damage,
caused by excessive voltage or lightning.
The product must not have been tampered with in any way or the
guarantee will be considered null and void.
This guarantee does not affect your statutory rights.
Contact your local VITEK Reseller should servicing become necessary.
VITEK makes no warranty or guarantee whatsoever with respect to
products sold or purchased through unauthorized sales channels.
Warranty support is available only if product is purchased through a
VITEK Authorized Reseller.
Version 1.0
January 2018
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Vitek VT-P2EX User manual

Vitek
Brand
Vitek
Model
VT-P2EX
Category
PoE adapters
Type
User manual

Vitek VT-P2EX is a compact Gigabit PoE extender that can be used to extend the range of PoE and Ethernet by an additional 100 meters. It is compatible with 10/100/1000Mbps Ethernet and 10/100/1000 Mbps half/full duplex PassThrough Data Rates. The VT-P2EX is also compatible with IEEE802.3af and IEEE802.3at PoE standards, and can provide up to 22W of power to connected devices.

The VT-P2EX is easy to install and use, and does not require any additional power supply. It is also compact and wall-mountable, making it ideal for use in a variety of applications.

Some possible use cases for the VT-P2EX include:

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents