F90-4K13

Barco F90-4K13 User manual

  • Hello! I am an AI chatbot trained to assist you with the Barco F90-4K13 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Sales Support - Projection
www.barco.com
Page 1 of 1
V1.0 EBM 04/17
Supported SDI formats F70/F90
eries projectors
GENERAL RELEASE APPROVED
Supported SDI video formats for Barco F70 and F90 projectors.
Introduction
Barco F70 and F90 projectors supports 3G-SDI and HD-SDI standard video interfaces via BNC
connectors. Supported video formats listed in this document are applicable to Barco F70 and F90 and
have been tested with these units. Please note that only the video formats described in this document
are tested and that other untested video formats using SDI might not give the desired results.
SDI module specifications
PARAMETER
VALUE
Standard
SMPTE 424M-2006
10bit level A
Connectors
(2x) BNC 75 ohm type IEC 60169-8, Amendment 2 1997, A
Connector 1: In
Connector 2: Out
Bandwidth
3 GHz
Return loss
>10dB at 3GHz
Impedance
75 ohm resistive
Supported video formats
FORMAT
HD-SDI
Barcolink
1080
50p
1080
59.94p
1080
60p
720
24p
720
25p
720
30p
720
50p
720
60p
720
23.98p
720
29.97p
720
59.94p
1080
24p
1080
25p
1080
30p
1080
23.98p
1080
29.97p
1200
50p
1200
59.94p
1200
60p
/