3M Imprint™ 3 VPS Impression Material User guide

Brand: 3M

Model: Imprint™ 3 VPS Impression Material

Type: User guide

44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB

1/6

Imprint

™

3 Penta

™

Quick Step Heavy Body

Imprint

™

3 Quick Step Light Body

Imprint

™

3 Quick Step Regular Body

Imprint

™

3 Penta

™

Putty

Imprint

™

3 Penta

™

Heavy Body

Imprint

™

3 Light Body

Imprint

™

3 Regular Body

VPS Impression Material

• Only use the Pentamix 2 mixing

unit for

Imprint 3 Penta Putty and

Imprint 3 Penta Quick Step

Heavy Body.

• Store ready-to-use cartridge

horizontally.

44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB

2/6

•

Insert the loaded Penta cartridge

into the Pentamix 2 unit and the

attach a red Penta Mixing Tip.

• For initial use extrude a small

amount of material and discard

it. Wait for a uniform mix.

• Begin filling the tray. Make

sure the Penta Mixing Tip is

constantly immersed in the

paste.

• Syringe the wash material

around the clean, dry tooth

preparation(s).

44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB

3/6

•

Finish filling the tray.

• Insert and immobilize the tray.

The tray must be seated before

the end of the working time of

the combined materials.

Please see flow graphs on the

next side for times.

• After removal from the mouth

rinse, disinfect and again rinse

the impression.

• Wait 120 min to pour the stone

model.

Made in USA by

3M ESPE 3M ESPE AG

Dental Products Dental Products

St. Paul, 82229 Seefeld

MN 55144-1000 Germany

3M, ESPE, Imprint and Penta are trademarks of 3M or 3M ESPE AG.

44000750222/01 (December 05)

44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB

4/6

Imprint 3 Penta Quick Step Heavy Body

Imprint 3 Quick Step Light Body / Imprint 3 Quick Step Regular Body

Working Time (at 23°C/74°F)

up to

1:15 (min:sec)

Intraoral Setting Time (at 37°C/99°F)

2:30 (min:sec)

Intraoral Syringe Time (at 37°C/99°F)

up to

0:40 (min:sec)

44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB

5/6

Imprint 3 Penta Putty

Imprint 3 Light Body / Imprint 3 Regular Body

Working Time (at 23°C/74°F)

up to

1:30 (min:sec)

Intraoral Setting Time (at 37°C/99°F)

3:00 (min:sec)

Intraoral Syringe Time (at 37°C/99°F)

up to

1:00 (min:sec)

44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB

6/6

Imprint 3 Penta Heavy Body

Imprint 3 Light Body / Imprint 3 Regular Body

Working Time (at 23°C/74°F)

up to

2:00 (min:sec)

Intraoral Setting Time (at 37°C/99°F)

3:30 (min:sec)

Intraoral Syringe Time (at 37°C/99°F)

up to

1:00 (min:sec)

3M Imprint™ 3 VPS Impression Material User guide

3M Imprint™ 3 VPS Impression Material User guide

3M Imprint™ 3 VPS Impression Material User guide

Related papers

Other documents