3M Imprint™ 3 VPS Impression Material User guide

3M
Brand
3M
Model
Imprint™ 3 VPS Impression Material
Type
User guide
44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB
1/6
Imprint
™
3 Penta
™
Quick Step Heavy Body
Imprint
™
3 Quick Step Light Body
Imprint
™
3 Quick Step Regular Body
Imprint
™
3 Penta
™
Putty
Imprint
™
3 Penta
™
Heavy Body
Imprint
™
3 Light Body
Imprint
™
3 Regular Body
VPS Impression Material
1
2
• Only use the Pentamix 2 mixing
unit for
Imprint 3 Penta Putty and
Imprint 3 Penta Quick Step
Heavy Body.
• Store ready-to-use cartridge
horizontally.
44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB
2/6
3
4
5
6
•
Insert the loaded Penta cartridge
into the Pentamix 2 unit and the
attach a red Penta Mixing Tip.
• For initial use extrude a small
amount of material and discard
it. Wait for a uniform mix.
• Begin filling the tray. Make
sure the Penta Mixing Tip is
constantly immersed in the
paste.
• Syringe the wash material
around the clean, dry tooth
preparation(s).
44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB
3/6
7
8
9
•
Finish filling the tray.
• Insert and immobilize the tray.
The tray must be seated before
the end of the working time of
the combined materials.
Please see flow graphs on the
next side for times.
• After removal from the mouth
rinse, disinfect and again rinse
the impression.
• Wait 120 min to pour the stone
model.
Made in USA by
3M ESPE 3M ESPE AG
Dental Products Dental Products
St. Paul, 82229 Seefeld
MN 55144-1000 Germany
3M, ESPE, Imprint and Penta are trademarks of 3M or 3M ESPE AG.
© 3M 2005. All rights reserved.
44000750222/01 (December 05)
44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB
4/6
Imprint 3 Penta Quick Step Heavy Body
Imprint 3 Quick Step Light Body / Imprint 3 Quick Step Regular Body
Working Time (at 23°C/74°F)
up to
1:15 (min:sec)
Intraoral Setting Time (at 37°C/99°F)
2:30 (min:sec)
Intraoral Syringe Time (at 37°C/99°F)
up to
0:40 (min:sec)
44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB
5/6
Imprint 3 Penta Putty
Imprint 3 Light Body / Imprint 3 Regular Body
Working Time (at 23°C/74°F)
up to
1:30 (min:sec)
Intraoral Setting Time (at 37°C/99°F)
3:00 (min:sec)
Intraoral Syringe Time (at 37°C/99°F)
up to
1:00 (min:sec)
44000750222/01 • Format: 101,6 x 152,4 mm • Lieferant: TB
6/6
Imprint 3 Penta Heavy Body
Imprint 3 Light Body / Imprint 3 Regular Body
Working Time (at 23°C/74°F)
up to
2:00 (min:sec)
Intraoral Setting Time (at 37°C/99°F)
3:30 (min:sec)
Intraoral Syringe Time (at 37°C/99°F)
up to
1:00 (min:sec)
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

3M Imprint™ 3 VPS Impression Material User guide

3M
Brand
3M
Model
Imprint™ 3 VPS Impression Material
Type
User guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents