Dynex DX-HTVMM1703-C Full Motion Mount for TVs 47″ – 75″ Installation guide

Brand: Dynex

Model: DX-HTVMM1703-C Full Motion Mount for TVs 47″ – 75″

Type: Installation guide

This manual is also suitable for

DX-HTVMM1703-C

Full Motion Mount for TVs 47" - 75"

Support de montage articulé pour

téléviseurs de 47 à 75 po

DX-HTVMM1703-C

INSTALLATION GUIDE/GUIDE D’INSTALLATION

Before using your new product, please read these instructions to prevent any damage.

Avant l’utilisation de ce produit neuf, lire ces instructions afin d'éviter tout dommage.

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 1 Monday, December 2, 2019 11:21 AM

Final page size: 8.268 x 11.22 in. (210 x 285 mm)

www.dynexproducts.com

Contents

ENGLISH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

VESA TV screw hole patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Tools needed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Package contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

TV Hardware Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Installation instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

STEP 2 - Select screws, washers, and spacers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back . . . . . . . . . . . . . . . . . . . . . . 9

STEP 4 - Determine the wall-mount location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

STEP 5 - Option 1: Install on a wood stud* wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

STEP 5 - Option 2: Install on a solid concrete or concrete block wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

STEP 6 - Secure your TV to the wall plate. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

STEP 7 - Manage cables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

STEP 8 - Adjust the mount arm and tilt angles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ONE-YEAR LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

FRENCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Caractéristiques. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Modèles d'orifices VESA pour téléviseur : . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Outils nécessaires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Contenu de l'emballage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Pièces . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Sachet de visserie pour le téléviseur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Instructions d’installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ÉTAPE 1 - Déterminer si le téléviseur a un dos plat ou de forme irrégulière ou est obstrué . . . . . . . . . . . . . . . . . . . . . . . . . . 22

ÉTAPE 2 - Sélectionner les vis, les rondelles et les entretoises . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

ÉTAPE 3 - Option 1 : Fixation du matériel de montage pour les téléviseurs à dos plat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

ÉTAPE 3 - Option 2 : Instructions de montage pour un téléviseur à dos de forme irrégulière ou obstrué . . . . . . . . . . . . . 25

ÉTAPE 4 - Déterminer l’emplacement du montage mural. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

ÉTAPE 5 - Option 1 : Installation sur un mur à montants en bois*. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

ÉTAPE 5 - Option 2 : Montage sur un mur en béton ou en blocs de béton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

ÉTAPE 6 - Fixation du téléviseur à la plaque murale . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

ÉTAPE 7 – Organisation des câbles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

ÉTAPE 8 – Réglage du bras de montage et de l'angle d'inclinaison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

GARANTIE LIMITÉE D’UN AN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 2 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

CAUTION: Do not use this product for any purpose not explicitly specified by Dynex.

• Improper installation may cause property damage or personal injury. If you do not understand these directions, or have

doubts about the safety of the installation, contact Customer Service or call a qualified contractor. Dynex is not

responsible for damage or injury caused by incorrect installation or use.

• The weight of your TV must not exceed 99 lbs. (45 kg). The wall must be capable of supporting five times the weight of

your TV and wall mount combined.

• This product contains small items that could be a choking hazard if swallowed. Keep these items away from young

children!

Features

• Supports TVs 47–75" and up to 99 lbs (45 kg)

• 45° swivel and -8 to 12° tilt lets you adjust the angle to suit your viewing position

• Lateral shift capability easily centers your TV

• Compatible with VESA patterns from 200 × 200 up to 600 × 400 with all common sizes in between

• Sturdy steel construction for years of dependable use

• Full assortment of mounting hardware included for a wide range of TVs

VESA TV screw hole patterns

Your wall mount works with the following VESA TV screw hole patterns:

200 × 200 mm (7.9 × 7.9") 400 × 200 mm (15.7 × 7.9") 500 × 400 mm (19.7 × 15.7")

300 × 200 mm (11.8 × 7.9") 400 × 300 mm (15.7 × 11.8") 600 × 400 mm (23.6 × 15.7")

300 × 300 mm (11.8 × 11.8") 400 × 400 mm (15.7 × 15.7")

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 3 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

Dimensions

Tools needed

You need the following tools to assemble your new TV wall mount:

(

)

(

)

16.9 in. (43 cm)

(

)

Edge-to-edge

stud finder

Phillips

screwdriver

Measuring

tape

Drill

3/16 in. (5 mm) wood drill bit

(for wood stud wall)

Hammer

Tape

Pencil

Socket

wrench

5 × Allen wrench

3/8 in. (10 mm) masonry drill bit (for

concrete wall)

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 4 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

Package contents

Parts

Make sure that you have all the parts and hardware necessary to assemble your new TV wall mount:

TV Hardware Bag

LABEL HARDWARE QTY. LABEL HARDWARE QTY.

A10

A11

A12

A13

Wall Mount (1)

Wall Plate Template (1)

TV Brackets (2)

M4 × 12 mm screw

M8 × 50 mm screw

M4 × 30 mm screw

Spacer

M5 × 12 mm screw

M4/M5 washer

M5 × 30 mm screw

M6/M8 washer

M6 × 12 mm screw

Lag bolt

M6 × 20 mm screw

Concrete anchor

M6 × 35 mm screw

Lag bolt washer

M8 × 16 mm screw

Magnetic removable bubble

level

M8 × 25 mm screw

Cable holder

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 5 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

Installation instructions

STEP 1 - Determine whether your TV has a flat back or an irregular or obstructed back

1 Carefully place your TV screen face-down on a cushioned, clean surface to protect the screen from damages and

scratches.

2 If your TV has a table-top stand attached, remove the stand. See the documentation that came with your TV for

instructions.

3 Lay the TV brackets, oriented vertically, on the back of your TV.

4 Align the screw holes in the TV brackets with the mounting screw holes on your TV.

5 Identify which type of back your TV has:

• Flat back: The brackets lay flush against the back of your TV and do not block any jacks. You do not need spacers when

assembling the wall mount.

• Obstructed back: The brackets block one or more of the jacks on the back of your TV. You need spacers when

assembling the wall mount.

• Irregularly-shaped back: There is a gap between a bracket and some part of the back of your TV. You need spacers

when assembling the wall mount.

6 Remove the TV brackets.

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 6 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

STEP 2 - Select screws, washers, and spacers

1 Select the hardware for your TV (screws, washers, and spacers). A limited number of TVs come with mounting hardware

included. (If there are screws that came with your TV, they are almost always in the holes on the back of your TV.) If you

don't know the correct length of the mounting screws your TV requires, test various sizes by hand-threading the

screws.

Select one of the following types of screws:

For a TV with a flat back:

• M4 X 12 mm screws (A1)

• M5 X 12 mm screws (A3)

• M6 X 12 mm screws (A5)

• M8 X 16 mm screws (A8)

For a TV with an irregular/obstructed back:

• M4 X 30 mm screws (A2)

• M5 X 30 mm screws (A4)

• M6 X 20 mm screws (A6)

• M6 X 35 mm screws (A7)

• M8 X 25 mm screws (A9)

• M8 X 50 mm screws (A10)

If you use M4 or M5 screws, select the M4/M5 washer (A12) or if you use M6 or M8 screws, select the

M6/M8 washer (A13). For an irregular or obstructed TV back, also use the spacers (A11).

2 Remove the screws from the holes in the back of your TV.

3 For a flat back TV, go to STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back

on page 8.

-OR-

For an irregular or obstructed back, go to STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or

obstructed back on page 9.

CAUTION: To avoid potential personal injuries and property damage, make sure that there are adequate threads to secure the

brackets to your TV. If you encounter resistance, stop immediately and contact customer service. Use the shortest screw and spacer

combination to accommodate your TV. Using hardware that is too long may damage your TV. However, using a screw that is too short

may cause your TV to fall from the mount.

Screw is

too long

Screw fits

correctly

Screw is

too short

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 7 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

STEP 3 - Option 1: Attach the mounting hardware to a TV with a flat back

You’ll need

1 Align the left and right TV brackets with the screw holes on the back of your TV. Make sure that the brackets are level.

2 Install washers (A12 or A13) and screws (A1, A3, A5, or A8) into the holes in the back of your TV.

3 Tighten the screws until they are snug against your TV brackets. Do not over tighten.

A1 (4)

Phillips screwdriver

Screws Washers

TV brackets (2)

A3 (4)

A12 (4)

A5 (4)

Magnetic removable

bubble level

A13 (4)

A8 (4)

A12 or

A13

A1/A3/A5

or A8

TV brackets

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 8 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

STEP 3 - Option 2: Attach the mounting hardware to a TV with an irregular or obstructed back

You’ll need

1 Place spacers (A11) over the holes on the back of your TV.

2 Align the left and right TV brackets with the screw holes on the back of your TV. Make sure that the brackets are level.

3 Place washers (A12 or A13) over the holes in the TV brackets. Insert screws (A2, A4, A6, A7, A9, or A10) through the

washers, TV brackets, and spacers and into the screw holes on the back of your TV.

4 Tighten the screws until they are snug against the TV brackets. Do not over tighten.

A2 (4)

A4 (4)

Phillips screwdriver

Screws

A7 (4)

A11 (4)

Spacers

TV brackets (2)

A6 (4)

Washers

A12 (4)

A13 (4)

Magnetic removable

bubble level

A10 (4)

A9 (4)

A12 or

A13

A2/A4 or

A6/A7 or

A9/A10

TV brackets

A11

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 9 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

STEP 4 - Determine the wall-mount location

You’ll need

The center of your TV will be offset .8 in. lower than the center of the wall plate on the wall-mount. Before you drill holes in

the wall:

1 Measure the distance from the bottom of your TV to the center point halfway between the top and bottom mounting

holes on the back of your TV. This is measurement a.

2 Measure the distance from the floor to where you want the bottom of your TV to be placed on the wall. Keep in mind

that the bottom of your TV should be placed above any furniture (such as entertainment centers or TV stands). Your TV

should also be above items placed on top of the furniture (like a Blu-ray player or cable box). This measurement is b.

3 Add a + b. The total measurement is the height where you want the center of the wall plate to be on the wall.

4 Use a pencil to mark this spot on the wall.

Notes:

• For more detailed information on determining where to drill your holes, visit our online height-finder at:

http://mf1.bestbuy.selectionassistant.com/index.php/heightfinder

• Your TV should be high enough so your eyes are level with the middle of the screen. This is normally 40 to 60 in. from the ground.

Measuring tape

Pencil

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 10 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

STEP 5 - Option 1: Install on a wood stud* wall

You’ll need

1 Locate the stud. Verify the center of the stud with an edge-to-edge stud finder.

2 Align the center of the wall plate template at the height (a + b) you determined in the previous step, make sure that the

template is level, then tape it to the wall.

3 Drill four pilot holes through the template to a depth of 2.4 in. (60 mm) using a 3/16 in. (5 mm) diameter drill bit, then

remove the template.

Note: Any drywall covering the wall must not exceed 5/8 in. (16 mm).

Edge-to edge

stud finder

Drill

3/16 in. wood

drill bit

Magnetic removable bubble

level

Wall plate template

Tape

B1 (4)

B3 (4)

Wall mount

Socket wrench

Align the center of the

template with the height

mark (a+b) you made in

STEP 4.

Level

* Minimum wood stud size: common 2 × 4 in. (51 × 102 mm) nominal 11/2 × 31/2 in. (38 × 89 mm).

* Minimum horizontal spacing between fasteners cannot be less than 16 in. (406 mm).

2.4 in. (60 mm)

3/16 in. (5 mm)

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 11 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

4 Align the wall plate on the wall mount with the pilot holes, insert the lag bolts (B1) through the lag bolt washers (B3),

then through the holes in the wall plate. Make sure that the wall plate is level. Tighten the lag bolts with a socket

wrench only until they are firm against the wall plate.

CAUTION: DO NOT over-tighten the lag bolts (B1).

Wood stud

Magnetic removable

bubble level

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 12 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

STEP 5 - Option 2: Install on a solid concrete or concrete block wall

You’ll need

1 Align the center of the wall plate template at the height (a + b) you determined in the previous step, make sure that it is

level, then tape it to the wall.

2 Drill four pilot holes through the template to a depth of 2.4 in. (60 mm) using a 3/8 in. (10 mm) diameter masonry drill

bit, then remove the template.

CAUTION: To prevent property damage or personal injury, never drill into the mortar between blocks. Mount the wall

plate directly onto the concrete surface.

3/8 in.

masonry drill

bit

Wall plate template

B2 (4)

Hammer

B1 (4)

B3 (4)

Wall mount

Magnetic removable

bubble level

Socket wrench

Drill

Edge-to edge

stud finder

Tape

* Minimum solid concrete thickness: 8 in. (203mm)

* Minimum concrete block size: 8 x 8 x 16 in. (203 x 203 x 406 mm).

* Minimum horizontal spacing between fasteners cannot be less than 16 in. (406 mm).

2.4 in. (60 mm)

3/8 in. (10 mm)

Align the center of

the template with

the height mark

(a+b) you made in

STEP 4.

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 13 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

3 Insert the concrete wall anchors (B2) into the pilot holes and use a hammer to make sure that the anchors are flush with

the concrete surface.

4 Align the wall plate on the wall mount with the anchors, insert the lag bolts (B1) through the lag bolt washers (B3),

then through the holes in the wall plate. Make sure that the wall plate is level. Tighten the lag bolts with a socket

wrench only until they are firm against the wall plate.

CAUTION: DO NOT over-tighten the lag bolts (B1).

Concrete

wall

Magnetic removable

bubble level

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 14 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

STEP 6 - Secure your TV to the wall plate

You’ll need

1 Holding your TV with the top of the screen tilted toward the wall, slide the upper edges of the right and left TV brackets

into the notches on the upper lip of your TV wall plate.

2 Push the bottom of your TV toward the wall until the safety bolts click into place, then tighten the bolts with a Phillips

screw driver.

CAUTION: Do not release your TV until the TV brackets are securely locked onto the wall plate.

Phillips screwdriver

HEAVY! You will

need assistance

with this step.

Safety bolt

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 15 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

STEP 7 - Manage cables

You’ll need

• Thread cables for attached devices along the mounting arm, then snap the cable holders over the cables to hold them

in place.

Cable holder (3)

Cable holder

Cables

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 16 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

STEP 8 - Adjust the mount arm and tilt angles

You’ll need

1 To adjust the arms’ tension (to make the arm easier or harder to move), loosen or tighten the tension screws with an

Allen wrench.

2 To rotate your TV left or right, hold the sides of your TV, then push one side while pulling the other side.

3 To tilt of your TV up or down, hold the top and bottom of your TV, then tilt your TV forward or backward.

Allen wrench

Tension screw

Tension

screw

-8° ~ 12°

45°

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 17 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

ONE-YEAR LIMITED WARRANTY

Definitions:

The Distributor* of Dynex branded products warrants to you, the original purchaser of this new Dynex-branded product (“Product”), that the Product

shall be free of defects in the original manufacturer of the material or workmanship for a period of one (1) year from the date of your purchase of the

Product (“Warranty Period”).

For this warranty to apply, your Product must be purchased in the United States or Canada from a Best Buy branded retail store or online at

www.bestbuy.com or www.bestbuy.ca and is packaged with this warranty statement.

How long does the coverage last?

The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. Your purchase date is printed on the receipt you received

with the Product.

What does this warranty cover?

During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized

Dynex repair center or store personnel, Dynex will (at its sole option): (1) repair the Product with new or rebuilt parts; or (2) replace the Product at no

charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Dynex and are not

returned to you. If service of Products or parts are required after the Warranty Period expires, you must pay all labor and parts charges. This warranty

lasts as long as you own your Dynex Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.

How to obtain warranty service?

If you purchased the Product at a Best Buy retail store location or from a Best Buy online website (www.bestbuy.com or www.bestbuy.ca), please take

your original receipt and the Product to any Best Buy store. Make sure that you place the Product in its original packaging or packaging that provides

the same amount of protection as the original packaging.

To obtain warranty service, in the United States and Canada call 1-800-305-2204. Call agents may diagnose and correct the issue over the phone.

Where is the warranty valid?

This warranty is valid only in the United States and Canada at Best Buy branded retail stores or websites to the original purchaser of the product in the

country where the original purchase was made.

What does the warranty not cover?

This warranty does not cover:

• Customer instruction/education

•Installation

•Set up adjustments

• Cosmetic damage

• Damage due to weather, lightning, and other acts of God, such as power surges

• Accidental damage

•Misuse

•Abuse

•Negligence

• Commercial purposes/use, including but not limited to use in a place of business or in communal areas of a multiple dwelling condominium or

apartment complex, or otherwise used in a place of other than a private home.

• Modification of any part of the Product, including the antenna

• Display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).

• Damage due to incorrect operation or maintenance

• Connection to an incorrect voltage or power supply

• Attempted repair by any person not authorized by Dynex to service the Product

• Products sold “as is” or “with all faults”

• Consumable s, including but not limited to batteries (i.e. AA, AAA, C etc.)

• Products where the factory applied serial number has been altered or removed

• Loss or Theft of this product or any part of the product

• Display panels containing up to three (3) pixel failures (dots that are dark or incorrectly illuminated) grouped in an area smaller than one tenth

(1/10) of the display size or up to five (5) pixel failures throughout the display. (Pixel based displays may contain a limited number of pixels that

may not function normally.)

• Failures or Damage caused by any contact including but not limited to liquids, gels or pastes.

REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY FOR BREACH OF WARRANTY. DYNEX SHALL NOT BE LIABLE

FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT, INCLUDING,

BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO OTHER EXPRESS

WARRANTIES WITH RESPECT TO THE PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING BUT NOT LIMITED TO ANY

IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE

WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME

STATES, PROVINCES AND JURISDICTIONS DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY

NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STAT E

OR PROVINCE TO PROVINCE.

Contact Dynex:

1-800-305-2204

www.dynexproducts.com

DYNEX is a trademark of Best Buy and its affiliated companies

*Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richfield, MN 55423 U.S.A.

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 18 Monday, December 2, 2019 11:21 AM

DX-HTVMM1703-C

www.dynexproducts.com

FRENCH

INSTRUCTIONS DE SÉCURITÉ IMPORTANTES

CONSERVER CES INSTRUCTIONS

AT TE NT IO N : Ne pas utiliser ce produit pour un usage qui ne soit explicitement spécifié par Dynex.

• Une installation inappropriée peut être source de dégâts matériels ou de blessures. Si ces instructions ne sont pas

comprises ou en cas de doutes sur la sécurité de l’installation, contacter le Service à la clientèle ou un installateur

professionnel. Dynex n’est pas responsable de dégâts ou de blessures résultants d’une installation ou d’une utilisation

incorrecte.

• Le poids du téléviseur ne doit pas dépasser 99 lb (45 kg). Le mur doit pouvoir supporter cinq fois le poids du téléviseur

système de montage mural inclus.

• Ce produit contient des petites pièces qui peuvent présenter des risques d’étouffement si elles sont avalées. Ranger ces

pièces hors de la portée des jeunes enfants!

Caractéristiques

• Prend en charge des téléviseurs de 47 à 75 po et pesant jusqu'à 99 lb (45 kg).

• Le pivotement de 45° et l'inclinaison de 8 à 12° permet d’ajuster l'angle pour correspondre à la position de visualisation.

• La possibilité de déplacer le téléviseur latéralement permet de le centrer facilement

• Compatible avec les normes VESA de 200 x 200 jusqu'à 600 x 400 incluant toutes les tailles intermédiaires courantes

• Construction en acier robuste pour des années d'utilisation sans problèmes.

• Un assortiment complet d'accessoires de montage inclus pour une large gamme de téléviseurs

Modèles d'orifices VESA pour téléviseur :

Ce support mural est compatible avec les modèles d'orifices VESA pour téléviseur :

200 × 200 mm (7,9 × 7,9 po) 400 × 200 mm (15,7 × 7,9 po) 500 × 400 mm (19,7 × 15,7 po)

300 × 200 mm (11,8 × 7,9 po) 400 × 300 mm (15,7 × 11,8

po)

600 × 400 mm (23,6 × 15,7 po)

300 × 300 mm (11,8 × 11,8

po)

400 × 400 mm (15,7 × 15,7

po)

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 19 Monday, December 2, 2019 11:21 AM

Full Motion Mount for TVs 47" - 75" Support de montage articulé pour téléviseurs de 47 à 75 po

www.dynexproducts.com

Dimensions

Outils nécessaires

Les outils suivants sont nécessaires pour l’assemblage de ce support de montage mural neuf pour téléviseur :

(

)

(

)

16,9 po (43 cm)

(

)

Détecteur de

montants bord

à bord

Tournevis

cruciforme

Mètre à

ruban

Perceuse

3/16 po Mèche à bois pour perceuse de

1/8 po (5 mm) (pour murs à montants en

bois)

Marteau

Ruban

adhésif

Crayon

Clé à douille

Clé hexagonale x 5

3/8 po Mèche à béton pour perceuse de

10 mm pour mur en béton

DX-HTVMM1703-C_19-0776_INSTALL_MAN_V5_EN_FR.fm Page 20 Monday, December 2, 2019 11:21 AM

Page is loading ...

Dynex DX-HTVMM1703-C Full Motion Mount for TVs 47″ – 75″ Installation guide

Brand: Dynex

Model: DX-HTVMM1703-C Full Motion Mount for TVs 47″ – 75″

Type: Installation guide

This manual is also suitable for

DX-HTVMM1703-C

Download PDF

report

in other languages

français: Dynex DX-HTVMM1703-C Full Motion Mount for TVs 47″ – 75″ Guide d'installation

Dynex DX-HTVMM1703-C Full Motion Mount for TVs 47″ – 75″ Installation guide

This manual is also suitable for

Dynex DX-HTVMM1703-C Full Motion Mount for TVs 47″ – 75″ Installation guide

in other languages

Related papers

Other documents