Insignia NS-CGDMBB2 Quick setup guide

Brand: Insignia

Model: NS-CGDMBB2

Type: Quick setup guide

IMPORTANT SAFETY INSTRUCTIONS

Choking Hazard

WARNING: This product may contain small parts which may be a choking

hazard to children under three years of age. Keep small parts away from

children.

Road Hazard

WARNING: Risk of severe injury or death. This product requires in-car

installation. Do not attempt to install or set up this equipment while your

vehicle is moving.

WARNING: Risk of severe injury or death. Do not install this equipment in a

way that it will obstruct the view of the driver. Some jurisdictions have

restrictions regarding the installation of after-market accessories. Consult and

obey the local laws and regulations.

Notices

• Insignia does not assume any responsibility for any nes, penalties, or

damages that may be incurred as a result of any state or local law or

ordinance relating to the use of your device.

• Do not install this or any product over an air bag cover or within the air bag

deployment zone. Insignia assumes no responsibility of liability for injury or

death as a result of car crashes or air bag deployment.

• Insignia is not responsible for any damages caused to your car, your device,

or yourself due to the installation or use of the mounts.

• This product is designed for a Garmin Nuvi GPS only. Do not use this

product with other type GPSs.

Before using your new product, please read these instructions to prevent any damage.

PACKAGE CONTENTS

• Car mount for Garmin Nuvi GPS

• Quick Setup Guide

FEATURES

• Works with a Garmin Nuvi GPS

• Weighted, non-skid, and secure

• Adjusts for customized viewing angles

• Bean bag design bends to the contour of your dashboard

QUICK SETUP GUIDE

Weighted

Dashboard Mount

NS-CGDMBB2

NS-CGDMBB2_19-0349_QSG_V1_EN_Final.ai 1 11/4/2019 2:41:26 PM

V1 ENGLISH 19-0349

PROBLEM

Will my mount t

any Garmin GPS?

Does my mount work

with a leather dashboard?

How do I attach my mount?

My mount lost its friction

and slides everywhere.

ATTACHING YOUR GARMIN MOUNT AND GPS

1 Place your Garmin mount on your dashboard. Your mount has a non-skid

design that holds it in place.

2 Slide your GPS onto the pre-installed Garmin 17 mm adapter on your

mount.

3 If needed, adjust the viewing angle by tilting your GPS up, down, right, or left.

The

adjustable arm has two swivel joints. You can adjust each joint by up to 90°.

ONE-YEAR LIMITED WARRANTY

Visit www.insigniaproducts.com for details.

CONTACT INSIGNIA

For customer service, call 1-877-467-4289 (U.S. and Canada) or

01-800-926-3000 (Mexico)

www.insigniaproducts.com

INSIGNIA is a trademark of Best Buy and its aliated companies.

Distributed by Best Buy Purchasing, LLC

7601 Penn Ave South, Richeld, MN 55423 U.S.A.

POSSIBLE SOLUTION

• Your mount works with Garmin Nuvi

GPS models. The Garmin Nuvi GPS

adapter comes pre-installed.

• Your mount works on any surface.

• Set your mount on your dashboard.

The non-skid design keeps it in

place.

• Try cleaning the non-skid surface

on the bottom of your mount with a

small amount of alcohol or a damp

cloth.

• Apply a coat of RTV silicone (not

included) or a piece of non-skid, RV

or camper shelving material (not

included) to the non-skid surface

on the bottom of your mount.

TROUBLESHOOTING

Garmin adapter

Base

Adjustable arm

NS-CGDMBB2_19-0349_QSG_V1_EN_Final.ai 2 11/4/2019 2:41:26 PM

Insignia NS-CGDMBB2 Quick setup guide

Insignia NS-CGDMBB2 Quick setup guide

Insignia NS-CGDMBB2 Quick setup guide

Related papers

Other documents