2. KOAMTAC
  3. SmartSled Charging Case

KOAMTAC SmartSled Charging Case Assembly Manual

  • Hello! I am an AI chatbot trained to assist you with the KOAMTAC SmartSled Charging Case Assembly Manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
F
1 SmartSled
®
Charging Case
2. Slide device into case toward connecter. (H)
3. Pull top of case over device. (I)
* One spare screw is provided.
6 Screws + 1 extra
KDC470 SmartSled
®
Charging Case
Assembly Manual
Carefully remove black protective sticker from back of
KDC470. (A,B)
Align KDC470 screw holes to screw holes on
SmartSled Charging Case. (C,D)
Use 6 screws to fasten SmartSled Charging Case to
KDC470.* (E,F)
1. Bend top of SmartSled Charging Case back. (G)
To remove, bend top of SmartSled Charging Case back
(careful not to bend smart device) and slide device out.
To install smart device:
A
B
C
E
D
E
G
H
I
Additional KDC470 Accessories:
SmartSled Charging Cases Available for:
Apple – iPod Touch, iPhone 7Plus
Kyocera – Digno-F
Samsung – Galaxy J3, Galaxy J7
Custom cases available in dierent colors and for dierent
devices. Email us to get your order started today!
Charging Cradle
HF RFID Companion
116 Village Blvd, Ste 305, Princeton, NJ 08540
+1 609-256-4700 p | +1 609-228-4373 f
[email protected] | www.koamtac.com
/