Alvanon Alva Form How To Install And Use

  • Hello! I am an AI chatbot trained to assist you with the Alvanon Alva Form How To Install And Use. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
HOW TO INSTALL AND USE
THE TABLE TOP STAND
COMPONENTS IN THE PACKAGE
( v1.0 )
INSTALLATION
To hold the bust form
Screw the center shaft clockwise. After installing the shaft, a bust form can be placed on the stand and and be rotated.
1 / 2
2 standing pegs
To hold the infant form
Screw the standing pegs in clockwise. After installing
the standing pegs, infant forms up to Toddler
4T(100cm) can be used on the table top stand.
Screw the stand peg.
Find out the stand peg measurement
Adjust the position of the stand peg
(i.e. half distance-48mm).
Table top stand
Wrench
Center shaft
2 / 2
CAUTION
Please remove the hanging pole before inserting the form.
CAUTION
Please do not insert the forms which exceed Toddler
4T(100cm) , otherwise, the stand will become unstable.
CAUTION
Table top stand can be scratched by hard objects such as watches.
Lock the standing pegs with the wrench.
Place form onto stand.
/