Thank you for purchasing the ULTRA-MP3.
Please follow the function indicator by the model you purchased.
WELCOME TO THE ULTRA-MP3 USER GUIDE
,
The Ultra MP3 Player may be damaged, if unplugged while data transfer is in
progress
,
Please notice the auto-run setup program of e-mail function will
be removed and all data will be erased by formatting ULTRA-MP3.
,To prevent from fire or shock hazard, do not expose the unit to
rain or moisture.
,To reduce the risk of electric shock, DO not remove cover.
WARNING
Product and Service Information
Warranty Exclusions:
Normal wears and tears
Abuse, unreasonable use, mistreatment, or neglect
Damage caused by equipment or system confliction while using ULTRA-MP3.
Damage caused by any modification or repair which was not authorized by Ultra
Products could not be authorized by ULTRA-MP3.
ULTRA-MP3 product who's Serial Number has been removed or defaced
Damage caused by use of non- ULTRA-MP3 packaging
Damage caused by improper or improperly used packaging
This warranty and remedies set forth above are exclusive and in lieu of all others,
whether oral or written, expressed or implied.
ULTRA-MP3 specifically disclaims any and all implied warranties, including, without
limitation, warranties of merchantability and fitness for a particular purpose and
against infringement.
ULTRA-MP3 is not responsible for special, incidental, indirect or consequential
damages resulting from any breach of warranty, or under any other legal theory,
including but not limited to loss of data, loss profits, downtime, goodwill, damage
or replacement of equipment and property, and any costs of recovering,
programming or reproducing any program or data stored in or used with
ULTRA-MP3 product.
Returned without packing with original ULTRA-MP3 package.
1
Product and Service Information
2
SD / MMC Card Reader Slot
Red Light Indication
(refer to P36)
Function Indicator Symbols
POWER/OFF/STOP
FWD
BWD
PLAY / PAUSE
VOL + / MENU UP
USB MINI DIN
VOL - / MENU DOWN
PHONEJACK
MIC
Move up / down / left right through menus
Press to select highlighted items
JOYSTICK
System Requirement
1. IBM compatible PC
2. Pentium II or above
3. Microsoft Windows 98 / SE / ME /2K / XP
4. 64 M RAM
5. USB port
6. CD-ROM
7.IE 5.5 or above
3
System Requirement
4
Battery Placement
ULTRA-MP3
ULTRA-MP3 functions Description
Navigating the menus
Press down the joystick " " to enter the main menu/sub menu.
Move the joystick " " up and down to review the function list.
Press down the joystick " " again to select ULTRA-MP3 functions.
1. Press down the joystick " " to see the main menu shows as below.
Power Off
Press Power " " Button again to turn it off.
Power on
1. Press Power " " button.
2. Turn to "power-on" mode in 3 seconds and LCD screen shows as below.(fig. a)
fig. a
<
MP3
>
001 00:58
song title │ song title
128Kbps Normal
2. Move up and down through menus.
3. Press joystick " " again to select highlighted item.
5
ULTRA-MP3 Functions Description
6
Adjust the volume by moving the joystick " " up and down.
MP3 Player
Volume Adjustment
1. Move the joystic
k " " left and right to go to previous track or next track.
2. In MP3 playing mode, hold down the joystick " " left or right to rewind or
fast-forward music.
BWD and FWD
1. Scroll to MP3 Player and press " " joystick to enter MP3 music play mode
.
2.
Press play button " " to play MP3 music.
3.
Press play button " " again to release pause mode.
4.
Press stop button " " to stop mode.
7
n
o
itp
i
r
c
s
eD
s
n
o
i
t
cnuF
3
PM
-
AR
T
LU
8
1.Group the selected music into different folders on your PC, and copy them to the
ULTRA-MP3.
2.Press down the joystick" " and scroll to File Explorer mode
3.Move the joystickup or down to select the device -- flash or MMC/SD card (in case the
MMC/SD card is inserted)
File Explorer provides an easy and quick way to find the track or the group of music to
listen to. It allows you to view tracks of your collection by title or file name on MP3
player.
4.Press down the joystick" " again to enter the root of the
device.
5.Move the joystick up or down to select a track or a folder
6.Press joystick to enter the selected folder and
you will see all tracks in this folder
7.Press Play button " " to play the selected track.
When ULTRA-MP3 is in File Explorer mode, it only plays the tracks in selected folder. If you
want to play all tracks in both flash memory and MMC/SD card, please quit File Explorer
mode.
9
n
o
itp
i
r
c
s
eD
s
n
o
i
t
cnuF
3
PM
-
AR
T
LU
10
1. Scroll to Voice Player.
2. Press Play button " " to start playing voice-recording files.
Voice Player
FM Radio
1. Scroll to FM radio and press down the joystick " " again to enter FM radio mode.
2. Search the channel by moving joystick " " left and right .
Save Band
25 Pre-set memory channels for saving favorite FM stations.
Auto Scan to define pre-set FM channels.
11
n
o
itp
i
r
c
s
eD
s
n
o
i
t
cnuF
3
PM
-
AR
T
LU
12
Selecting pre-set memory channel.
1. In FM Radio mode, press Play button " " .
2. Pre-set memory channel number (1-25) blinked.
3. Move the joystick " " left and right to select through pre-set memory channel
(No.1-25).
4. Set up selected pre-set memory channel by pressing Play button " " again.
Saving favorite FM stations in pre-set memory channels.
1. While completing pre-set channel selection.
2. In setting mode, select your favorite FM channel.
3. Press down the joystick " " and scroll to " Setting " scroll to " Save Band "
4. Press down the joystick " " again to save the FM station
in pre-set memory channel.
5. "Channel Setting" shows on the LCD while completed.
1. In FM Radio mode, press down the joystick " " and scroll to "Setting" to enter
"Auto Scan" function.
2. Start "Auto Scan" to define pre-set channels.
3. Make sure when proceeding with "Auto Scan", the headset is connected to the MP3
player (Headset works as the antenna when ULTRA-MP3 is in FM mode).
Browsing for Pre-set memory bands
1. In FM Radio mode, press Play button " " .
2. Move the joystick " " left and right to select through pre-set memory band
(No.1-25).
Auto Scan
1. In setting mode, press down the joystick " " and scroll to Auto Scan.
2. Press down the joystick " " again to start channel searching.
3. Search for channels and auto-saved in pre-set memory bands.
Record
1.Press the center of joystick " " and then scroll to Record.
2.Press down the joystick " " and It starts to the voice recording.
3.Press the Play button " " to pause voice recording.
4.Press the Stop button " " to stop voice recording.
13
ULTRA-MP3 Functions Description
14
10
Setting
1. Scroll to Setting
2. Press down the joystick " " again to see sub menu as shown below.
Equalizer
Scroll to different modes to experience sound effect in Normal/Classic/Pop/Rock/Jazz/Bass
mode.
Repeat
1. Press down the joystick to see submenu frame shows as below.
2. Press the center of joystick " " to select a desired playback setting from
Normal , Repeat one, Repeat All, Shuffle and Shuf, Repeat.
Repeat A-B ( / )
1. In MP3 playing mode, press the Power button " " and Play Button " "
simultaneously.
2. Setting for the start of repeat part A is completed. " "
3. Press the Power button " " and Play Button " " simultaneously again.
15
ULTRA-MP3 Functions Description
16
4. Setting for the end of repeat part B is completed.
5. Both selected parts (A-B) play continuously.
6. Press the Power button " " and Play Button " " again to release.
Move the joystick " " left and right to adjust the brightness/contrast of the LCD
screen.
LCD Contrast
Move the joystick " " up and down to select time for backlight.
By preeing the center of joystick " " to select the backlight time.
Backlight
LCD
Language
Move the joystick " " up and down to select the language.
17
ULTRA-MP3 Functions Description
18
Format
1. Press down the joystick " " , "Format? Yes/No" shows on the LCD screen.
2. Move the joystick " " up for "Yes" and press down the joystick " " to format
3. Move the joystick " " down for "No" and press down the joystick " " to quit.
When using the format function,[Select]-[Erase]-[Format], ONLY files with a .mp3
extension will be erased
To erase all the files in the MP3 player, please plug mp3 player into PC and format
the removable disk drive which the mp3 player is mapping to.
If you cannot erase the files in mp3 player by selecting
[Setting]
[Erase]
[Erase] menu, please uncheck the file¡'s read-only attribution
in Windows and erase them again.
Power Saving
1. Press down the joystick " " to see submenu as shown below..
2. Press the center of joystick to select a desired time to turn off the ULTRA-MP3.
Strongly recommend to set the power saving mode to Disable mode.
Erase Function
Erase one file
1. Press down the joystick " " ,"Erase one file" shows on the LCD screen.
2. Press the Play button " " to select "YES" to erase the file.
3. Press the Power button " " to quit.
19
-ULTRA-MP3 Functions Description
20
Rec Bitrate
1. Press down the joystick " " to see submenu as shown below..
2.Press the center of joystick to select the compression rate which is between
8000Hz and 48000 Hz.
The lower the compression ratio the lower the quality of the audio records, so it's
suitable for long time recording, and vice versa.
Lock Function
<
MP3
>
001 00:58
song title │ song title
128Kbps Normal
1. Press the Power " " and press down the joystick " "
simultaneously to enter key-locked mode..
2. Press the Power button " " and press the center of joystick " "
simultaneously again to release.
Please change the battery when "Battery Low" indicator shows on the LCD screen.
Battery Indicator Function
21
ULTRA-MP3 Functions Description
22
<
MP3
>
001 00:58
Auto Power off Function
For power saving purpose, ULTRA-Mp3 turns to "power off" mode if under non-using
status and if the play " " button is not pressed for 60 seconds.
<
MP3
>
001 00:58
song title │ song title
128Kbps Normal
1. Insert the SD/MMC card to the card reader on the back of the Ultra MP3.
2. Move the joystick " " left and right to select MP3 files saved in SD/MMC card.
3. The icon " SD " shows on the LCD screen while reading SD/MMC card.
SD. MMC card Function ( )
USB Flash Drive Function
How to use USB Flash Drive?
1. Connect ULTRA-MP3 with PC USB port.
2. " USB Connect " icon shows on the LCD screen.
3. Double click on " My Computer ", two additional removable disks icons are added.
For windows 2000 user, please make sure to install Windows Service Pack3.
For Windows 98 user, please make sure to install the enclosed driver.
23
ULTRA-MP3 Functions Description
24
3.Find the [My Tools ] folder and double-click the [My Tools] icon.
4.Please doubled-click the [THMail.exe ] program to start the software.
5.Follow the on-screen instructions to proceed.
E-mail Function :
Begin to use Software
1. Click[ My Computer ] and you will see that Windows has automatically assigned a
drive letter for every removable disk detected.
2. double-click the [ Removable Disk ].
27
Driver & Ultility Installation
28
A. SMTP Setting
1. Click on the SMTP tab
2. In the SMTP field the name of the outgoing e-mail server.
3. In the User field, type your account name.
4. In the Password field, type your password
5. In the Name field, type your name as you want it to appear to everyone who gets
e-mail from you.
6. In the Address field, type your full e-mail address and then Click " OK ".
1. Click "Setting: Button
2. Click on the POP3 tab
3. In the POP3 field, type the name of the incoming e-mail server.
4. In the User field, type your account name
5. In the Password field, type your password
6. Please check in the Check Leave Mail(s) in POP3
server box or you can check in the
Launch thmail.exe after device pluging box for your preference.
Function Description
A. POP 3 Setting
SETTING
29
Driver & Ultility Installation
30
Compose And Send Email
1. Click in the message area, and type your
message as shown below.
2. Click Send
.
Check Your Email Account
1. Click "Check" Button.
2. Click the message you want to read and then click "Get Mail".
Button to download the mail you just select from the message list.
3. Click the message you want to delete from POP3 server and then click " "
Remove button.
4. Click the Recheck " "button to check POP3 mail server again.
Create Address Book
1. Click [New] " " Button and then click
[ Address ] " " Button.
2. Click the New button,
3. Type the person's name and the e-mail address
with no spaces and click "OK".
31
Driver & Ultility Installation
32
Import email into Microsoft Outlook Express
1. Click "Open" button.
2. On the File menu, point to [Copy to folder] or [Move to folder]
3.Verify the location of your messages, and then click OK.
Then you will find your email message in outlook express.
Back up and restore the email messenger software
When first time launched, Email messenger software will be automatically backup to
your PC. After formatting your ULTRA-MP3 you can still restore the email software by
following the procedures below.
1.Click on [ My documents ] folder
2.You will find [ ULTRA-MP3-Backup ] folder
3.Find thmail.exe or smail.exe for restoring the email messenger software.
4. After executing thmail.exe or smail.exe file, You can select the drive letter for your
ULTRA-mp3 to restore the software.
33
Driver & Ultility Installation
34
Install ID3 Editor software
Using the Utility
This software can play MP3 files, edit ID3 tag, lyrics and images. It also can show
the lyrics and images when playing.
1.Insert the enclosed software CD into CD-ROM drive
2.Click "Install ID3 Editor software" to install software
35
Driver & Ultility Installation
36
For windows 98 user
For windows 98 user, please simply insert the enclosed CD into CD-ROM drive.
1. Double Click [ My computer ] from desktop
2. Select CD-ROM drive
3. Click the right button fo mouse andthen select [ Open ]
4. Double click the [ Setup.exe ] to install driver.
5. A series of screens, a wizard will guide you through the software installation.
Firmware Restoring
How to identify when it is needed to restore ULTRA-MP3 firmware?
--When the red LED lights up above the smart reader slot, it means that the
firmware needs to be restored. Please follow the instruction below to restore the
firmware.
37
Driver & Ultility Installation
38
ULTRA-MP3 provides a useful utility for restoring the firmware.
To install this utility, simply insert the enclosed CD into CD-ROM drive.
1 Double Click [ My computer ] from desktop.
2 Select CD-ROM drive.
3 Click the right button for mouse and then select [ Open ].
4 Double click the [Setup.exe] to install driver.
5 A series of screens, a wizard will guide you through the software installation.
1. Press and hold the Power key button
2. Connect the ULTRA-MP3 to your PC.( Please make sure the Power " "
button must be pressed while connecting the ULTRA-MP3 to the PC.)
3. When you have connected ULTRA-MP3 to the PC, please go to [ Device
Manager]
4. Please find a new drive named [ Player Recovery Device Class ] to check out if
it is well connected.( If you can not find [ Player Recovery Device Class ], please
Step B
Step A
SD / MMC Card ReaderSD / MMC Card Reader
Red Light Indication
(refer to P32)
Red Light Indication
(refer to P32)
ULTRA-MP3 ULTRA-MP3
Page is loading ...
Page is loading ...
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Tai-Hao Eyeshot Pocki-MP3 User manual
-
iClick Sohlo 7 User manual
-
Perception Digital PD-200 User manual
-
Evolution Technologies MP3 Player EV64AMX User manual
-
COBY electronic MPC751 User manual
-
-
ActionTec MP3V256 Owner's manual
-
-
Truly electronic Mftg Digital Photo & Audio Player User manual
-
Netac Tech C670 User manual
