Tai-Hao Eyeshot Pocki-MP3 User manual

  • Hello! I am an AI chatbot trained to assist you with the Tai-Hao Eyeshot Pocki-MP3 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NO:TZF MVX-8E
Thank you for purchasing the Pocki-MP3.
Please follow the function indicator by the model you purchased.
WELCOME TO THE POCKI-MP3 USER GUIDE
,
The Pocki-MP3 do harm when you take away from USB port
while file transmitting has not completed.
,
Please notice the auto-run setup program of e-mail function will
be removed and all data will be erased by formatting Pocki-MP3.
,To prevent fire of Shock hazard, do not expose the unit to rain or
moisture.
,To reduce the risk of electric shock, DO not remove cover.
WARNING
Product and Service Information
Warranty Exclusions:
Normal wears and tears
Abuse, unreasonable use, mistreatment, or neglect
Damage caused by equipment or system confliction while using Pocki-MP3.
Damage caused by any modification or repair which could not be authorized
by Pocki-MP3.
Pocki-MP3 product who's Serial Number has been removed or defaced
Damage caused by use of non- Pocki-MP3 packaging
Damage caused by improper or improperly used packaging
This warranty and remedies set forth above are exclusive and in lieu of all others,
whether oral or written, expressed or implied.
Pocki-MP3 specifically disclaims any and all implied warranties, including, without
limitation, warranties of merchantability and fitness for a particular purpose and
against infringement.
Pocki-MP3 is not responsible for special, incidental, indirect or consequential
damages resulting from any breach of warranty, or under any other legal theory,
including but not limited to loss of data, loss profits, downtime, goodwill, damage
or replacement of equipment and property, and any costs of recovering,
programming or reproducing any program or data stored in or used with Pocki-
MP3 product.
Returned without packing with original Pocki-MP3 package.
1
Product and Service Information
2
SD / MMC Card Reader Slot Red Light Indication
(refer to P34)
Function Indicator Symbols
POWER/OFF/STOP
FWD
BWD
PLAY / PAUSE
VOL + / MENU UP
USB MINI DIN
VOL - / MENU DOWN PHONEJACK
MIC
Move up / down / left right through menus
Press to select highlighted items
JOYSTICK
System Requirement
1. IBM compatible PC
2. Pentium II or above
3. Microsoft Windows 98 / SE / ME /2K / XP
4. 64 M RAM
5. USB port
6. CD-ROM
7.IE 5.5 or above
Follow the function indicator by the model you purchased.
3
System Requirement
4
Battery Placement
Cupid Pocki-MP3
Function Indicator Symbols System Requirement
1. IBM compatible PC
2. Pentium II or above
3. Microsoft Windows 98 / SE / ME /2K / XP
4. 64 M RAM
5. USB port
6. CD-ROM
7.IE 5.5 or above
System Requirement
6
5
Battery Placement
POWER/OFF/STOP
FWD / MENU
BWD / MENU
PLAY / PAUSE VOL - VOL + PHONEJACK
JOYSTICK
Move up / down / left right through menus
Press to select highlighted items MIC
SD / MMC Card Reader Red Light Indication
(refer to P34)
Follow the function indicator by the model you purchased.
Eyeshot Pocki-MP3
Pocki-MP3 functions Description
l
Navigating the menus
t
Press down the joystick " " to enter the main menu/sub menu.
t
Move the joystick " " up and down to review the function list.
t
Press down the joystick " " again to select Pocki-MP3 functions.
1. Press down the joystick " " to see the main menu shows as below.
l
Power Off
Press Power " " Button again to turn it off.
l
Power on
1. Press Power " " button.
2. Turn to "power-on" mode in 3 seconds and LCD screen shows as below.(fig. a)
fig. a
<
MP3
>
001 00:58
song title song title
128Kbps Normal
2. Move up and down through menus.
3. Press joystick " " again to select highlighted item.
5
POCKI-MP3 Functions Description
6
Adjust the volume by moving the joystick " " up and down.
t
MP3 Player
t
Volume Adjustment
1. Moving the joystick " " left and right to previous track or next track.
2. In MP3 playing mode, moving the joystick " " left and right continuously
to play the music backward and forward.
t
BWD and FWD
1. Scroll to MP3 Player and press " " joystick to MP3 music play mode.
2. By pressing Play button " " to play MP3 music.
3. By Pressing Play button " " again to release pause mode.
4. By pressing Stop button " " to stop mode.
1. Scroll to Voice Player.
2. Press Play button " " to start playing voice-recording files.
t
Voice Player
t
FM Radio
1. Scroll to FM radio and press down the joystick " " again to FM radio mode.
2. Search the channel by moving joystick " " left and right .
7
POCKI-MP3 Functions Description
8
u Save Band
25 Pre-set memory channels for saving favorite FM stations.
Selecting pre-set memory channel.
1. In FM Radio mode, press Play button " " .
2. Pre-set memory channel number (1-25) blinked.
3. Move the joystick " " left and right to select through pre-set memory channel
(No.1-25).
4. Set up selected pre-set memory channel by pressing Play button " " again.
Saving favorite FM stations in pre-set memory channels.
1. While completing pre-set channel selection.
2. In setting mode, select your favorite FM channel.
3. Press down the joystick " " and scroll to " Setting " scroll to " Save Band "
4. Press down the joystick " " again to save the FM station
in pre-set memory channel.
5. "Channel Setting" shows on the LCD while completed.
Browsing for Pre-set memory bands
1. In FM Radio mode, press Play button " " .
2. Move the joystick " " left and right to select through pre-set memory band
(No.1-25).
u Auto Scan
1. In setting mode, press down the joystick " " and scroll to Auto Scan.
2. Press down the joystick " " again to start channel searching.
3. Search for channels and auto-saved in pre-set memory bands.
l
Record
1.Press the center of joystick " " and then scroll to Record.
2.Press down the joystick " " and It starts to the voice recording.
3.Press the Play button " " to pause voice recording.
4.Press the Stop button " " to stop voice recording.
9
POCKI-MP3 Functions Description
10
l
Setting
1. Scroll to Setting
2. Press down the joystick " " again to see sub frame as below.
u Equalizer
Scroll to different modes to experience sound effect in Normal/Classic/Pop/Rock/Jazz/Bass
mode.
u Repeat
1 Press down the joystick to see sub frame shows as below.
2.By pressing the center of joystick " " to select a desired playback setting from
Normal , Repeat one, Repeat All, Shuffle and Shuf, Repeat.
11
POCKI-MP3 Functions Description
12
1. In MP3 playing mode, press the Power button " " and Play Button " "
simultaneously.
2. Setting for the start of repeat part A is completed. " "
v
Repeat A-B ( / )
4. Setting for the end of repeat part B is completed.
5. Both selected parts (A-B) play continuously.
6. Press the Power button " " and Play Button " " again to release.
3. Press the Power button " " and Play Button " " simultaneously again.
Move the joystick " " left and right to adjust the display brightness contract
shows on the LCD screen.
v
LCD Contrast
Move the joystick " " up and down to select time for backlight.
By preeing the center of joystick " " to select the backlight time.
v
Backlight
u LCD
13
POCKI-MP3 Functions Description
14
u Format
1. Press down the joystick " " , "Format? Yes/No" shows on the LCD screen.
2. Move the joystick " " up for "Yes" and press down the joystick " " to format
3. Move the joystick " " down for "No" and press down the joystick " " to quit.
l
Language
Move the joystick " " up and down to select the language as display text.
l
Erase Function
u Erase one file
1. Press down the joystick " " ,"Erase one file" shows on the LCD screen.
2. Press the Play button " " to select "YES" to erase the file.
3. Press the Power button " " to quit.
15
POCKI-MP3 Functions Description
16
ª
When select [Setting]
g
[Erase]
g
[Format] menu in mp3 player, you can only erase
the files with an .mp3 file extension.
ª
Erasing all the files in mp3 player, please plug mp3 player into PC and format the
removable disk drive which the mp3 player mapping to.
ª
If you can not erase the files in mp3 player by selecting
[Setting]
g
[Erase]
g
[Erase] menu, please uncheck the file¡'s read-only attribution
in Windows and erase them again.
l
Power Saving
1 Press down the joystick " " to see sub frame shows as below.
2.By pressing the center of joystick to select a desired time to turn off the Pocki-MP3.
Strongly recommend to set the power saving mode to Disable mode.
l
Rec Bitrate
1 Press down the joystick " " to see sub frame shows as below.
2.By pressing the center of joystick to select the record compress ration which is between
8000Hz and 48000 Hz.
The lower compress ratio is for lower record quality, so it's suitable for long time
recording, and vice versa.
l
Lock Function
<
MP3
>
001 00:58
song title song title
128Kbps Normal
17
POCKI-MP3 Functions Description
18
<
MP3
>
001 00:58
Please change the battery when "Battery Low" indicator shows on the LCD screen.
l
Battery Indicator Function
l
Auto Power off Function
For power saving purpose, Pocki-Mp3 turns to "power off" mode if under non-using
status and without pressing Play " " button in 60 seconds.
<
MP3
>
001 00:58
song title song title
128Kbps Normal
1. Insert the SD/MMC card to the card reader in the back part of Pocki-MP3.
2. Move the joystick " " left and right to select MP3 files save in SD/MMC card.
3. The icon " SD " shows on the LCD screen while reading SD/MMC card.
l
SD. MMC card Function ( )
l
USB Flash Drive Function
How to use USB Flash Drive?
1. Connect Pocki-MP3 with PC USB port.
2. " USB Connect " icon shows on the LCD screen.
3. Double click on " My Computer ", two additional removable disks icons increased.
t
For windows 2000 user, please make sure to install Windows Service Pack3.
t
For Windows 98 user, please make sure to install the enclosed driver.
1. Press the Power " " and press down the joystick " "
simultaneously to key-locked mode.
2. Press the Power button " " and press the center of joystick " "
simultaneously again to release.
19
POCKI-MP3 Functions Description
20
Driver & Ultility Installations
l
Driver Installation
u Install MP3 Driver for windows 98
1. Insert the enclosed software CD into CD-ROM drive
2.Click "Install Mp3 Driver for Windows 98" to install driver
u For windows2000 User
Please install Windows 2000 Service Pack 3 from this website:
http:// v4.windowsupdate.Microsoft.com/zhtw/default.asp
2 Notice:
The Pocki-MP3 do harm when you take away from USB port while file
transmitting has not completed.
6. When data transmitting finished, " fig.b " icon shows on the LCD screen again.
fig.bfig.a
4. Pocki-MP3 can be used as USB Flash drive now.
5. While data transmitting, " fig.a " icon shows on the LCD screen .
23
Driver & Ultility Installation
24
3.Find the [My Tools ] folder and double-click the [My Tools] icon.
4.Please doubled-click the [THMail.exe ] program to start the software.
5.Follow the on-screen instructions to proceed.
l
E-mail Function :
u Begin to use Software
1. Click[ My Computer ] and you will see that Windows has automatically assigned a
drive letter for every removable disk detected.
2. double-click the [ Removable Disk ].
23
Driver & Ultility Installation
24
t
A. SMTP Setting
1. Click on the SMTP tab
2. In the SMTP field the name of the outgoing e-mail server.
3. In the User field, type your account name.
4. In the Password field, type your password
5. In the Name field, type your name as you want it to appear to everyone who gets
e-mail from you.
6. In the Address field, type your full e-mail address and then Click " OK ".
1. Click "Setting: Button
2. Click on the POP3 tab
3. In the POP3 field, type the name of the incoming e-mail server.
4. In the User field, type your account name
5. In the Password field, type your password
6. Please check in the Check Leave Mail(s) in POP3 server box or you can check in the
Launch thmail.exe after device pluging box for your preference.
l
Function Description
t
A. POP 3 Setting
u SETTING
25
Driver & Ultility Installation
26
u Compose And Send Email
1. Click in the message area, and type your
message as shown below.
2. Click Send .
u Check Your Email Account
1. Click "Check" Button.
2. Click the message you want to read and then click "Get Mail".
Button to download the mail you just select from the message list.
3. Click the message you want to delete from POP3 server and then click " "
Remove button.
4. Click the Recheck " "button to check POP3 mail server again.
u Create Address Book
1. Click [New] " " Button and then click
[ Address ] " " Button.
2. Click the New button,
3. Type the person's name and the e-mail address
with no spaces and click "OK".
27
Driver & Ultility Installation
28
u Import email into Microsoft Outlook Express
1. Click "Open" button.
2. On the File menu, point to [Copy to folder] or [Move to folder]
3.Verify the location of your messages, and then click OK.
Then you will find your email message into outlook express.
u Back up and restore the email messenger software
When first time launched, Email messenger software will be automatically backup to
your PC. After formatting your Pocki-MP3 you can still restore the email software by
following the procedures below.
1.Click on [ My documents ] folder
2.You will find [ Pocki-MP3-Backup ] folder
3.Find thmail.exe or smail.exe for restoring the email messenger software.
4. After executing thmail.exe or smail.exe file, You can select the drive letter for your
pocki-mp3 to restore the software.
29
Driver & Ultility Installation
30
l
Install ID3 Editor software
l
Using the Utility
This software can play MP3 files, edit ID3 tag, lyrics and images. It also can show
the lyrics and images when playing.
1.Insert the enclosed software CD into CD-ROM drive
2.Click "Install ID3 Editor software" to install software
31
Driver & Ultility Installation
32
u For windows 98 user
For windows 98 user, please simply insert the enclosed CD into CD-ROM drive.
1. Double Click [ My computer ] from desktop
2. Select CD-ROM drive
3. Click the right button fo mouse andthen select [ Open ]
4. Double click the [ Setup.exe ] to install driver.
5. A series of screens, a wizard will guide you through the software installation.
l
Firmware Restoring
How to identify when is needed to restore Pocki-MP3 firmware?
--When the red LED is lighting upon the smart card reader slot, it means that the
firmware is needed to restore again. Please follow the instruction below to
restore the firmware.
35
Driver & Ultility Installation
36
Pocki-MP3 provides a useful utility for restoring the firmware.
To install this utility, simply insert the enclosed CD into CD-ROM drive.
1 Double Click [ My computer ] from desktop.
2 Select CD-ROM drive.
3 Click the right button for mouse and then select [ Open ].
4 Double click the [Setup.exe] to install driver.
5 A series of screens, a wizard will guide you through the software installation.
1. Press and hold the Power key button
2. Connect the Pocki-MP3 to your PC.( Please make sure the Power " " button
must be pressed while connecting the Pocki-MP3 to the PC.)
3. When you have connected Pocki-MP3 to the PC, please go to [ Device Manager]
4. Please find a new drive named [ Player Recovery Device Class ] to check out if
it is well connected.( If you can not find [ Player Recovery Device Class ], please
repeat step1 to step 2 again.)
Step B
Step A
SD / MMC Card ReaderSD / MMC Card Reader
Red Light Indication
(refer to P32)
Red Light Indication
(refer to P32)
Cupid Pocki-MP3 Eyeshot Pocki-MP3
35
Driver & Ultility Installations
36
5. Now , you can release the Power Button.
6. Please go to [ Start ]
Â
[ Program file ]
Â
and find [ SigmaTel MSCNMMC Audio Play]
Â
[ Firmware download ] to load the firmware.
7. It will start searching for devices
connectedto the system.
8.Click [ Start ] to run the firmware installation.
9. A series of screens, a wizard will guide you through the software installation.
/