Polaroid PhotoMAX PDC 1100 Quick Start Card
- Type
- Quick Start Card
Polaroid PhotoMAX PDC 1100 lets you capture and store precious moments with its 4MB removable memory card. With its optical viewfinder and LCD display, you can frame your shots perfectly and review them instantly. Choose from various resolution settings, from low to super, and adjust exposure for different lighting conditions. Experiment with the macro lens setting for close-up shots or use the self-timer for group photos. The built-in flash offers auto, fill, and red-eye reduction modes for optimal lighting.
Polaroid PhotoMAX PDC 1100 lets you capture and store precious moments with its 4MB removable memory card. With its optical viewfinder and LCD display, you can frame your shots perfectly and review them instantly. Choose from various resolution settings, from low to super, and adjust exposure for different lighting conditions. Experiment with the macro lens setting for close-up shots or use the self-timer for group photos. The built-in flash offers auto, fill, and red-eye reduction modes for optimal lighting.
PDC 1100 Quickstart Card side 2
Camera features Status panel display Control panel
The camera has two LCD menus:
Refer to the Polaroid
PhotoMAX PDC 1100 User’s Guide for more information.
Press the Menu Dial to display menu options, change
between Record and Playback mode, and make a selection.
Turn the Menu Dial to scroll between different menu
choices and settings.
©1999 Polaroid Corporation, Cambridge, MA 02139, U.S.A., owner of the trademarks
"Polaroid", "Polaroid PhotoMAX" and "PDC". "MAX the Bird" ©1998 Polaroid Corporation.
All other product names may be the property of their respective owners. All rights
reserved. Printed in U.S.A. PU-21203Q-0
REC (Record) to take photos.
PLAY (Playback) to review photos stored in memory.
Quickstart Card
What’s in the Polaroid PhotoMAX
PDC 1100 Digital Camera Creative Kit?
Polaroid PDC 1100 Digital Cameraa
a
Wrist strap (with removable memory clip)b
b
4 MB removable memory cardc
c
Four AA batteriesd
d
Video cablee
e
Camera casef
f
Polaroid PhotoMAX Image Maker Software CD-ROMg
g
AC adapterh
h
Polaroid PhotoMAX PDC 1100 User’s Guidei
i
Quickstart cardj
j
RS-232C serial cablek
k
USB cablel
l
Shutter button Flash
Optical viewfinder
Memory card & battery status
• No memory card in slot
(blinking)
• Color: low to super
• Black & white: low to super
• Memory card in slot
Number of images remaining
Pixel resolution/color setting
• Auto focus
• Macro
• Infinity
• Fixed focus: 3, 7, 16 ft
Lens setting
• Light +1. +2, +3, +4
• Darken -1, -2, -3, -4
• Normal
Exposure setting
• On/off
Self-timer setting
• Autoflash
• Flash off
• Red eye reduction
Flash setting
- Low resolution
- Medium resolution
- High resolution
- Super resolution
36
16
12
6
Lens
Status panel
LCD display
Power switch
LCD display switch
USB cable connection
Video cable connection
Memory card slot
Battery compartment
Hand grip
Tripod socket
Ready indicator
Optical viewfinder
Wait indicator
Menu dial
Serial cable connection
AC adapter connection
RECORD
PLAYBACK
• Battery good
• Battery low
• Fill flash on
PDC 1100 Quickstart Card side 2
Camera features Status panel display Control panel
The camera has two LCD menus:
Refer to the Polaroid
PhotoMAX PDC 1100 User’s Guide for more information.
Press the Menu Dial to display menu options, change
between Record and Playback mode, and make a selection.
Turn the Menu Dial to scroll between different menu
choices and settings.
©1999 Polaroid Corporation, Cambridge, MA 02139, U.S.A., owner of the trademarks
"Polaroid", "Polaroid PhotoMAX" and "PDC". "MAX the Bird" ©1998 Polaroid Corporation.
All other product names may be the property of their respective owners. All rights
reserved. Printed in U.S.A. PU-21203Q-0
REC (Record) to take photos.
PLAY (Playback) to review photos stored in memory.
Quickstart Card
What’s in the Polaroid PhotoMAX
PDC 1100 Digital Camera Creative Kit?
Polaroid PDC 1100 Digital Cameraa
a
Wrist strap (with removable memory clip)b
b
4 MB removable memory cardc
c
Four AA batteriesd
d
Video cablee
e
Camera casef
f
Polaroid PhotoMAX Image Maker Software CD-ROMg
g
AC adapterh
h
Polaroid PhotoMAX PDC 1100 User’s Guidei
i
Quickstart cardj
j
RS-232C serial cablek
k
USB cablel
l
Shutter button Flash
Optical viewfinder
Memory card & battery status
• No memory card in slot
(blinking)
• Color: low to super
• Black & white: low to super
• Memory card in slot
Number of images remaining
Pixel resolution/color setting
• Auto focus
• Macro
• Infinity
• Fixed focus: 3, 7, 16 ft
Lens setting
• Light +1. +2, +3, +4
• Darken -1, -2, -3, -4
• Normal
Exposure setting
• On/off
Self-timer setting
• Autoflash
• Flash off
• Red eye reduction
Flash setting
- Low resolution
- Medium resolution
- High resolution
- Super resolution
36
16
12
6
Lens
Status panel
LCD display
Power switch
LCD display switch
USB cable connection
Video cable connection
Memory card slot
Battery compartment
Hand grip
Tripod socket
Ready indicator
Optical viewfinder
Wait indicator
Menu dial
Serial cable connection
AC adapter connection
RECORD
PLAYBACK
• Battery good
• Battery low
• Fill flash on
PDC 1100 Quickstart Card side 2
Camera features Status panel display Control panel
The camera has two LCD menus:
Refer to the Polaroid
PhotoMAX PDC 1100 User’s Guide for more information.
Press the Menu Dial to display menu options, change
between Record and Playback mode, and make a selection.
Turn the Menu Dial to scroll between different menu
choices and settings.
©1999 Polaroid Corporation, Cambridge, MA 02139, U.S.A., owner of the trademarks
"Polaroid", "Polaroid PhotoMAX" and "PDC". "MAX the Bird" ©1998 Polaroid Corporation.
All other product names may be the property of their respective owners. All rights
reserved. Printed in U.S.A. PU-21203Q-0
REC (Record) to take photos.
PLAY (Playback) to review photos stored in memory.
Quickstart Card
What’s in the Polaroid PhotoMAX
PDC 1100 Digital Camera Creative Kit?
Polaroid PDC 1100 Digital Cameraa
a
Wrist strap (with removable memory clip)b
b
4 MB removable memory cardc
c
Four AA batteriesd
d
Video cablee
e
Camera casef
f
Polaroid PhotoMAX Image Maker Software CD-ROMg
g
AC adapterh
h
Polaroid PhotoMAX PDC 1100 User’s Guidei
i
Quickstart cardj
j
RS-232C serial cablek
k
USB cablel
l
Shutter button Flash
Optical viewfinder
Memory card & battery status
• No memory card in slot
(blinking)
• Color: low to super
• Black & white: low to super
• Memory card in slot
Number of images remaining
Pixel resolution/color setting
• Auto focus
• Macro
• Infinity
• Fixed focus: 3, 7, 16 ft
Lens setting
• Light +1. +2, +3, +4
• Darken -1, -2, -3, -4
• Normal
Exposure setting
• On/off
Self-timer setting
• Autoflash
• Flash off
• Red eye reduction
Flash setting
- Low resolution
- Medium resolution
- High resolution
- Super resolution
36
16
12
6
Lens
Status panel
LCD display
Power switch
LCD display switch
USB cable connection
Video cable connection
Memory card slot
Battery compartment
Hand grip
Tripod socket
Ready indicator
Optical viewfinder
Wait indicator
Menu dial
Serial cable connection
AC adapter connection
RECORD
PLAYBACK
• Battery good
• Battery low
• Fill flash on
PDC 1100 Quickstart Card side 2
Camera features Status panel display Control panel
The camera has two LCD menus:
Refer to the Polaroid
PhotoMAX PDC 1100 User’s Guide for more information.
Press the Menu Dial to display menu options, change
between Record and Playback mode, and make a selection.
Turn the Menu Dial to scroll between different menu
choices and settings.
©1999 Polaroid Corporation, Cambridge, MA 02139, U.S.A., owner of the trademarks
"Polaroid", "Polaroid PhotoMAX" and "PDC". "MAX the Bird" ©1998 Polaroid Corporation.
All other product names may be the property of their respective owners. All rights
reserved. Printed in U.S.A. PU-21203Q-0
REC (Record) to take photos.
PLAY (Playback) to review photos stored in memory.
Quickstart Card
What’s in the Polaroid PhotoMAX
PDC 1100 Digital Camera Creative Kit?
Polaroid PDC 1100 Digital Cameraa
a
Wrist strap (with removable memory clip)b
b
4 MB removable memory cardc
c
Four AA batteriesd
d
Video cablee
e
Camera casef
f
Polaroid PhotoMAX Image Maker Software CD-ROMg
g
AC adapterh
h
Polaroid PhotoMAX PDC 1100 User’s Guidei
i
Quickstart cardj
j
RS-232C serial cablek
k
USB cablel
l
Shutter button Flash
Optical viewfinder
Memory card & battery status
• No memory card in slot
(blinking)
• Color: low to super
• Black & white: low to super
• Memory card in slot
Number of images remaining
Pixel resolution/color setting
• Auto focus
• Macro
• Infinity
• Fixed focus: 3, 7, 16 ft
Lens setting
• Light +1. +2, +3, +4
• Darken -1, -2, -3, -4
• Normal
Exposure setting
• On/off
Self-timer setting
• Autoflash
• Flash off
• Red eye reduction
Flash setting
- Low resolution
- Medium resolution
- High resolution
- Super resolution
36
16
12
6
Lens
Status panel
LCD display
Power switch
LCD display switch
USB cable connection
Video cable connection
Memory card slot
Battery compartment
Hand grip
Tripod socket
Ready indicator
Optical viewfinder
Wait indicator
Menu dial
Serial cable connection
AC adapter connection
RECORD
PLAYBACK
• Battery good
• Battery low
• Fill flash on
Getting the camera ready
Use the optical viewfinder to save battery power.
Attach the wrist strap to the camera
as shown.
Taking photos
You can take a photo using the optical viewfinder or the
LCD display.
Transferring photos to your computer
The are two ways of transferring digital photos to your
computer.
RS-232 Serial port connection.
Use the LCD display to frame photos when using the Macro
lens setting. See the User’s Guide (included in kit) for more
information on changing camera settings.
Slide the power switch up to turn on the camera.1
Hold the camera steady and press the shutter button down
firmly.
4
The red LED light appears and the photo appears
on the LCD display while it processes. Wait until
the image is fully processed before taking another
photo.
Slide the LCD display switch up to turn on the LCD display
if needed.
Wait until the green LED light appears. The camera
is now focused and ready to take a photo.
2
Wait until the flash has charged. The flash icon blinks on
the Status panel display while the flash is charging. You
cannot take a photo while the flash is charging.
3
Status panel
LCD display
Shutter button
Power switch
LCD display
switch
Ready indicator
Optical
viewfinder
Wait indicator
Flash icon blinks
until flash is ready
To connect using the serial cable
Load batteries
Attach wrist strap
Connect the AC adapter to the AC
power connection on the camera.
3
Turn off your computer and all
peripherals (scanner, printer).
1
Connect the serial cable to the
serial port on the camera and
then to your computer.
2
Plug the AC adapter into a
grounded electrical outlet.
4
Turn on your computer.5
Turn on your camera.6
Double click the Polaroid PhotoMAX
icon on your desktop.
7
Plug the AC adapter into a
grounded electrical outlet.
Turn on your camera.4
Double click the Polaroid PhotoMAX
icon on your desktop.
5
To connect using the USB cable
Connect the AC adapter to the AC
power connection on the camera.
2
Connect the USB cable to the
USB port on the camera and then
to your computer.
1
3
USB port connection. USB supported only for Windows 98.
You can also purchase an optional external memory card
reader. See your computer retailer for more information.
Press shutter
button half-way
to focus
Flash range = 3ft -10 ft
(1m - 3m)
Frame photo
using optical
viewfinder or
LCD display
Serial port
AC power
connection
USB port
AC power
connection
AC power
connection
Cover lock
Turn the camera power off.
Insert the memory card into the
slot (with the label side of the card
facing the rear of the camera).
Use the clip to remove the memory
card from the camera.
Insert memory card
Open the battery compartment.
Slide the cover lock to the unlocked
position and push forward to open.
Insert four AA batteries into the
compartment.
To extend battery life, use the AC adapter
whenever possible or purchase
rechargeable batteries.
Do not mix old batteries with new
batteries, or different manufacturer’s
batteries together.
Do not insert or remove the memory
card while the camera power is on.
You must insert the memory card
before you can turn on the camera.
Connect one end of the AC adapter
to the AC power connector on the
camera.
Connect the other end to a grounded
electrical outlet.
PDC 1100 Quickstart Card side 1
Getting the camera ready
Use the optical viewfinder to save battery power.
Attach the wrist strap to the camera
as shown.
Taking photos
You can take a photo using the optical viewfinder or the
LCD display.
Transferring photos to your computer
The are two ways of transferring digital photos to your
computer.
RS-232 Serial port connection.
Use the LCD display to frame photos when using the Macro
lens setting. See the User’s Guide (included in kit) for more
information on changing camera settings.
Slide the power switch up to turn on the camera.1
Hold the camera steady and press the shutter button down
firmly.
4
The red LED light appears and the photo appears
on the LCD display while it processes. Wait until
the image is fully processed before taking another
photo.
Slide the LCD display switch up to turn on the LCD display
if needed.
Wait until the green LED light appears. The camera
is now focused and ready to take a photo.
2
Wait until the flash has charged. The flash icon blinks on
the Status panel display while the flash is charging. You
cannot take a photo while the flash is charging.
3
Status panel
LCD display
Shutter button
Power switch
LCD display
switch
Ready indicator
Optical
viewfinder
Wait indicator
Flash icon blinks
until flash is ready
To connect using the serial cable
Load batteries
Attach wrist strap
Connect the AC adapter to the AC
power connection on the camera.
3
Turn off your computer and all
peripherals (scanner, printer).
1
Connect the serial cable to the
serial port on the camera and
then to your computer.
2
Plug the AC adapter into a
grounded electrical outlet.
4
Turn on your computer.5
Turn on your camera.6
Double click the Polaroid PhotoMAX
icon on your desktop.
7
Plug the AC adapter into a
grounded electrical outlet.
Turn on your camera.4
Double click the Polaroid PhotoMAX
icon on your desktop.
5
To connect using the USB cable
Connect the AC adapter to the AC
power connection on the camera.
2
Connect the USB cable to the
USB port on the camera and then
to your computer.
1
3
USB port connection. USB supported only for Windows 98.
You can also purchase an optional external memory card
reader. See your computer retailer for more information.
Press shutter
button half-way
to focus
Flash range = 3ft -10 ft
(1m - 3m)
Frame photo
using optical
viewfinder or
LCD display
Serial port
AC power
connection
USB port
AC power
connection
AC power
connection
Cover lock
Turn the camera power off.
Insert the memory card into the
slot (with the label side of the card
facing the rear of the camera).
Use the clip to remove the memory
card from the camera.
Insert memory card
Open the battery compartment.
Slide the cover lock to the unlocked
position and push forward to open.
Insert four AA batteries into the
compartment.
To extend battery life, use the AC adapter
whenever possible or purchase
rechargeable batteries.
Do not mix old batteries with new
batteries, or different manufacturer’s
batteries together.
Do not insert or remove the memory
card while the camera power is on.
You must insert the memory card
before you can turn on the camera.
Connect one end of the AC adapter
to the AC power connector on the
camera.
Connect the other end to a grounded
electrical outlet.
PDC 1100 Quickstart Card side 1
Getting the camera ready
Use the optical viewfinder to save battery power.
Attach the wrist strap to the camera
as shown.
Taking photos
You can take a photo using the optical viewfinder or the
LCD display.
Transferring photos to your computer
The are two ways of transferring digital photos to your
computer.
RS-232 Serial port connection.
Use the LCD display to frame photos when using the Macro
lens setting. See the User’s Guide (included in kit) for more
information on changing camera settings.
Slide the power switch up to turn on the camera.1
Hold the camera steady and press the shutter button down
firmly.
4
The red LED light appears and the photo appears
on the LCD display while it processes. Wait until
the image is fully processed before taking another
photo.
Slide the LCD display switch up to turn on the LCD display
if needed.
Wait until the green LED light appears. The camera
is now focused and ready to take a photo.
2
Wait until the flash has charged. The flash icon blinks on
the Status panel display while the flash is charging. You
cannot take a photo while the flash is charging.
3
Status panel
LCD display
Shutter button
Power switch
LCD display
switch
Ready indicator
Optical
viewfinder
Wait indicator
Flash icon blinks
until flash is ready
To connect using the serial cable
Load batteries
Attach wrist strap
Connect the AC adapter to the AC
power connection on the camera.
3
Turn off your computer and all
peripherals (scanner, printer).
1
Connect the serial cable to the
serial port on the camera and
then to your computer.
2
Plug the AC adapter into a
grounded electrical outlet.
4
Turn on your computer.5
Turn on your camera.6
Double click the Polaroid PhotoMAX
icon on your desktop.
7
Plug the AC adapter into a
grounded electrical outlet.
Turn on your camera.4
Double click the Polaroid PhotoMAX
icon on your desktop.
5
To connect using the USB cable
Connect the AC adapter to the AC
power connection on the camera.
2
Connect the USB cable to the
USB port on the camera and then
to your computer.
1
3
USB port connection. USB supported only for Windows 98.
You can also purchase an optional external memory card
reader. See your computer retailer for more information.
Press shutter
button half-way
to focus
Flash range = 3ft -10 ft
(1m - 3m)
Frame photo
using optical
viewfinder or
LCD display
Serial port
AC power
connection
USB port
AC power
connection
AC power
connection
Cover lock
Turn the camera power off.
Insert the memory card into the
slot (with the label side of the card
facing the rear of the camera).
Use the clip to remove the memory
card from the camera.
Insert memory card
Open the battery compartment.
Slide the cover lock to the unlocked
position and push forward to open.
Insert four AA batteries into the
compartment.
To extend battery life, use the AC adapter
whenever possible or purchase
rechargeable batteries.
Do not mix old batteries with new
batteries, or different manufacturer’s
batteries together.
Do not insert or remove the memory
card while the camera power is on.
You must insert the memory card
before you can turn on the camera.
Connect one end of the AC adapter
to the AC power connector on the
camera.
Connect the other end to a grounded
electrical outlet.
PDC 1100 Quickstart Card side 1
Getting the camera ready
Use the optical viewfinder to save battery power.
Attach the wrist strap to the camera
as shown.
Taking photos
You can take a photo using the optical viewfinder or the
LCD display.
Transferring photos to your computer
The are two ways of transferring digital photos to your
computer.
RS-232 Serial port connection.
Use the LCD display to frame photos when using the Macro
lens setting. See the User’s Guide (included in kit) for more
information on changing camera settings.
Slide the power switch up to turn on the camera.1
Hold the camera steady and press the shutter button down
firmly.
4
The red LED light appears and the photo appears
on the LCD display while it processes. Wait until
the image is fully processed before taking another
photo.
Slide the LCD display switch up to turn on the LCD display
if needed.
Wait until the green LED light appears. The camera
is now focused and ready to take a photo.
2
Wait until the flash has charged. The flash icon blinks on
the Status panel display while the flash is charging. You
cannot take a photo while the flash is charging.
3
Status panel
LCD display
Shutter button
Power switch
LCD display
switch
Ready indicator
Optical
viewfinder
Wait indicator
Flash icon blinks
until flash is ready
To connect using the serial cable
Load batteries
Attach wrist strap
Connect the AC adapter to the AC
power connection on the camera.
3
Turn off your computer and all
peripherals (scanner, printer).
1
Connect the serial cable to the
serial port on the camera and
then to your computer.
2
Plug the AC adapter into a
grounded electrical outlet.
4
Turn on your computer.5
Turn on your camera.6
Double click the Polaroid PhotoMAX
icon on your desktop.
7
Plug the AC adapter into a
grounded electrical outlet.
Turn on your camera.4
Double click the Polaroid PhotoMAX
icon on your desktop.
5
To connect using the USB cable
Connect the AC adapter to the AC
power connection on the camera.
2
Connect the USB cable to the
USB port on the camera and then
to your computer.
1
3
USB port connection. USB supported only for Windows 98.
You can also purchase an optional external memory card
reader. See your computer retailer for more information.
Press shutter
button half-way
to focus
Flash range = 3ft -10 ft
(1m - 3m)
Frame photo
using optical
viewfinder or
LCD display
Serial port
AC power
connection
USB port
AC power
connection
AC power
connection
Cover lock
Turn the camera power off.
Insert the memory card into the
slot (with the label side of the card
facing the rear of the camera).
Use the clip to remove the memory
card from the camera.
Insert memory card
Open the battery compartment.
Slide the cover lock to the unlocked
position and push forward to open.
Insert four AA batteries into the
compartment.
To extend battery life, use the AC adapter
whenever possible or purchase
rechargeable batteries.
Do not mix old batteries with new
batteries, or different manufacturer’s
batteries together.
Do not insert or remove the memory
card while the camera power is on.
You must insert the memory card
before you can turn on the camera.
Connect one end of the AC adapter
to the AC power connector on the
camera.
Connect the other end to a grounded
electrical outlet.
PDC 1100 Quickstart Card side 1
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Polaroid PhotoMAX PDC 1100 Quick Start Card
- Type
- Quick Start Card
Polaroid PhotoMAX PDC 1100 lets you capture and store precious moments with its 4MB removable memory card. With its optical viewfinder and LCD display, you can frame your shots perfectly and review them instantly. Choose from various resolution settings, from low to super, and adjust exposure for different lighting conditions. Experiment with the macro lens setting for close-up shots or use the self-timer for group photos. The built-in flash offers auto, fill, and red-eye reduction modes for optimal lighting.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Polaroid PhotoMAX PDC 1100 User manual
-
-
-
-
-
-
-
-
-