TERMITE SHIELD #17049
INSTALLATION GUIDELINES
These installation guidelines are for use with typical or standard applications. It is always recommended to seek advice from a licensed professional, and to
check with your local building inspector or building permit office for approvals and possible variations that may apply.
Gibraltar’s Termite Shield is a metal barrier that is installed around potential termite entry points, including: foundations, piers and pipes.
Installation locations include: between the cement foundation and the wooden components that are joined to the masonry wall, or directly on top
of the foundation.
Masonry Wall
Termite Shield
Sill Gasket
Wood Components
4 in.
10.16 cm
2 in.
5.08 cm
135°