Ronbow Essentials 200480-1-WH Installation guide

Brand
Ronbow Essentials
Model
200480-1-WH
Type
Installation guide
Installation Sheet
www.ronbow.com
Step 1 :
Step 3 :
Ronbow Corporation, All Rights Reserved.
Ceramic Vessel
Model:
200480
Step 2 :
Step 4 :
Position countertop opening to ensure
clearance between the lavatory,
faucet, and backsplash. Cut counter
top opening and cut-out max 16”W x
14”H. Set sink and seal with silicone or
caulking
See Figure 1.
Place a generous portion of plumbers’
putty under drain cap and insert
whole drain body inside the bowl and
through the countertop.
(There may be a small beveled rubber
washer packaged with your drain, please
discard this and use plumbers’ putty instead)
See Figure 2.
From under the drain, insert the thick
rubber washer and screw on and
tighten the metal nut. Remove excess
plumbers’ putty
See Figure 3.
Attach p-trap to tailpiece.
Self-Rimming Sinks
Drain Cap
Overflow hole
Metal Nut
Thick rubber
washer
Tailpiece
Figure 1.
Figure 2.
Figure 3.
countertop
Drain
Drain Nut
Tailpiece
Thick rubber
washer
P-trap
  • Page 1 1

Ronbow Essentials 200480-1-WH Installation guide

Brand
Ronbow Essentials
Model
200480-1-WH
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents