Electrolux EFC90990X User manual

Page is loading ...

electrolux 3electrolux 3

electrolux 3

GB

WW

W

elcome to the world of Electrelcome to the world of Electr

elcome to the world of Electr

oluxolux

olux

Thank you for choosing a first class

product from Electrolux, which

hopefully will provide you with lots of

pleasure in the future. The Electrolux

ambition is to offer a wide variety of

quality products that make your life

more comfortable. You find some

examples on the cover in this manual.

Please take a few minutes to study this

manual so that you can take advantage

of the benefits of your new machine.

We promise that it will provide a

superior user experience delivering

ease of mind.

Good luck!

44

4

electr electr

electr

oluxolux

olux contents

GB

ContentsContents

Contents

Safety warnings ................................ 5

Description of the Appliance ............. 7

Control Panel ................................... 8

Maintenance and Care ................... 10

Special accessories ........................ 14

Something Not Working ................. 14

Installation ...................................... 15

The following symbols are used in this user manual:

Important information concerning your personal safety and information on

how to avoid damaging the appliance.

General information and tips.

Environmental information.

electroluxelectrolux

electrolux

safety warnings

55

5

GB

Safety warSafety war

Safety war

ningsnings

nings

• Any installation work must be

undertaken by a qualified electrician

or a competent person.

• This hood must be installed in

accordance with the installation

instructions and all measurements

must be adhered to.

• When used as an extractor unit, the

hood must be fitted with a hose

having preferably the same diameter

as the outlet hole.

Attention: The hose is not suppliedAttention: The hose is not supplied

Attention: The hose is not supplied

and must be purand must be pur

and must be pur

chased separatelychased separately

chased separately

..

.

• The minimum distance between the

supporting surface for the cooking

vessels on the hob and the lowest

part of the range hood must be not

less than

50cm50cm

50cm from electric cookers

and

65cm65cm

65cm from gas or mixed

cookers.

If the instructions for installation for

the gas hob specify a greater

distance, this must be adhered to.

• Before any cleaning or maintenance

operation, disconnect hood from the

mains by removing the plug or

disconnecting the mains electrical

supply.

Always wear work gloves for all

installation and maintenance

operations.

• The appliance is not intended for use

by children or persons with impaired

physical, sensorial or mental faculties,

or if lacking in experience or

knowledge, unless they are under

supervision or have been trained in

the use of the appliance by a person

responsible for their safety.

• This appliance is designed to be

operated by adults, children should

be monitored to ensure that they do

not play with the appliance.

• This appliance is designed to be

operated by adults. Children should

not be allowed to tamper with the

controls or play with the appliance.

• Never use the hood without

effectively mounted grating!

• The hood must NEVER be used as a

support surface unless specifically

indicated.

• The premises where the appliance is

installed must be sufficiently

ventilated, when the kitchen hood is

used together with other gas

combustion devices or other fuels.

• The ducting system for this appliance

must not be connected to any

existing ventilation system which is

being used for any other purpose

such as discharging exhaust fumes

from appliances burning gas or other

fuels.

• The flaming of foods beneath the

hood itself is severely prohibited.

• The use of exposed flames is

detrimental to the filters and may

cause a fire risk, and must therefore

be avoided in all circumstances.

• Any frying must be done with care in

order to make sure that the oil does

not overheat and ignite.

66

6

electr electr

electr

oluxolux

olux safety warnings

GB

• With regards to the technical and

safety measures to be adopted for

fume discharging it is important to

closely follow the regulations

provided by the authorised

authorities.

• The hood must be regularly cleaned

on both the inside and outside (AT

LEAST ONCE A MONTH).

• This must be completed in

accordance with the maintenance

instructions provided in this manual).

Failure to follow the instructions

provided in this user guide regarding

the cleaning of the hood and filters

will lead to the risk of fires.

• Do not use or leave the hood without

the lamp correctly mounted due to

the possible risk of electric shocks.

• We will not accept any responsibility

for any faults, damage or fires caused

to the appliance as a result of the

non-observance of the instructions

included in this manual.

This appliance is marked according to

the European directive 2002/96/EC on

Waste Electrical and Electronic

Equipment (WEEE).

By ensuring this product is disposed of

correctly, you will help prevent potential

negative consequences for the

environment and human health, which

could otherwise be caused by

inappropriate waste handling of this

product.

The symbol on the product, or on

the documents accompanying the

product, indicates that this appliance

may not be treated as household

waste. Instead it should be taken to the

appropriate collection point for the

recycling of electrical and electronic

equipment.

Disposal must be carried out in

accordance with local environmental

regulations for waste disposal.

For more detailed information about

treatment, recovery and recycling of

this product, please contact your local

authority.

electrolux electrolux

electrolux description of the appliance

77

7

GB

Description of the ApplianceDescription of the Appliance

Description of the Appliance

• The hood is supplied to function in

the recirculation mode (the charcoal

filter is already mounted), but can

also be used in the extraction mode

by removing the charcoal filter.

Extraction modeExtraction mode

Extraction mode

• In this mode fumes are extracted to

the outside via a

hosehose

hose connected to

the

coupling ringcoupling ring

coupling ring.

• In order to obtain the best performan-

ce the hose should have a diameter

equal to the outlet hole.

RecirRecir

Recir

culation modeculation mode

culation mode

• The air is filtered through a

charchar

char

coalcoal

coal

filterfilter

filter and returned to the kitchen.

• You will need an original charcoal filter

for the recirculation mode. (See

Special Accessories).

RecirRecir

Recir

culation modeculation mode

culation mode

Extraction modeExtraction mode

Extraction mode

88

8

electr electr

electr

oluxolux

olux control panel

GB

ContrContr

Contr

ol Panelol Panel

ol Panel

• Best results are obtained by using a low speed for normal conditions and a high

speed when odours are more concentrated.

Turn the hood on a few minutes before you start cooking.

The hood should be left on after cooking for about 15 minutes or until all the

odours have disappeared.

• The cooker hood is fitted with a sensor which, in the event of extreme variations

in temperature, switches the appliance on automatically until the temperature of

the environment surrounding the hood has been significantly reduced.

• The control switches are located on the unit’s front panel:

11

1

Motor ON/OFF buttonMotor ON/OFF button

Motor ON/OFF button

By pressing the button, the hood starts at speed 1.

Pressing the button (OFF) while the hood is in function turns the latter off.

22

2

Speed incrSpeed incr

Speed incr

ease buttonease button

ease button

By pressing the button, the hood starts at speed 1.

Pressing the button (while the hood is on) modifies the motor speed:

Speed 1: the number "

11

1" appears on the display

Speed 2: the number "

22

2" appears on the display

Speed 3: the number "

33

3" appears on the display

High-speed: the number "4" appears (flashing) on the display

The high-speed function is regulated by a timer. The standard time setting is 5',

at the end of which the hood adjusts to speed 2.

Press button

22

2 to deactivate this function before the set time expires; the hood

will adjust to speed 1. Press button

11

1 to turn the hood off.

33

3

Lights ON/OFF buttonLights ON/OFF button

Lights ON/OFF button

44

4

Speed timer buttonSpeed timer button

Speed timer button

55

5

DisplayDisplay

Display

12 5 34

electrolux electrolux

electrolux control panel

99

9

GB

Speed timer buttonSpeed timer button

Speed timer button

Press button "

44

4" to activate the speed

timer; the hood turns off once the set

time expires.

The timer functions in the following

way:

•

Speed 1Speed 1

Speed 1 - 20 minutes (the number

"

11

1" and a small flashing LED light

appear on the display)

•

Speed 2Speed 2

Speed 2 - 15 minutes (the number

"

22

2" and a small flashing LED light

appear on the display)

•

Speed 3Speed 3

Speed 3 - 10 minutes (the number

"

33

3" and a small flashing LED light

appear on the display)

•

High-speedHigh-speed

High-speed - 5 minutes (the number

"

44

4" and a small flashing LED light

appear on the display)

Press button

11

1 or button

4 4

4 to turn the

hood off while the speed timer is in

function; by pressing button

22

2, the

hood returns to the set speed.

GrGr

Gr

ease filter indicatorease filter indicator

ease filter indicator

After 80 hours of operation, the

number "

11

1" starts flashing on the

display.

Press and hold button

11

1 or 3 to reset

the indicator.

Carry out maintenance on the grease

filter according to the indications of this

manual.

Charcoal filter indicator

After 320 hours of operation, the

number "2" starts flashing on the

display.

Press and hold button

11

1 or

33

3 to reset

the indicator.

Carry out maintenance on the charcoal

filter according to the indications of this

manual.

When both filter signals appear

simultaneously, numbers "1" and "2"

will alternately flash on the display.

Reset the indicator by performing the

above-mentioned procedure twice.

The first operation resets the grease

filter indicator, while the second

operation resets the charcoal filter

indicator.

The charcoal filter indicator is not active

in the standard mode.

If the hood is used in the recirculation

mode, the charcoal filter indicator must

be activated.

Perform the following steps to activatePerform the following steps to activate

Perform the following steps to activate

the charthe char

the char

coal filter indicator:coal filter indicator:

coal filter indicator:

Turn the hood off and keep buttons

2 2

2

and

33

3 pressed for 3".

The numbers "1" and "2" will flash for

2" once the function has been

activated.

Charcoal filter indicator deactivation:

Turn the hood off and keep buttons

11

1

and

22

2 pressed for 3".

The number "1" will flash for 2" to

indicate that the function has been

deactivated.

1010

10

electr electr

electr

oluxolux

olux maintenance and care

GB

Maintenance and CarMaintenance and Car

Maintenance and Car

ee

e

••

•

BeforBefor

Befor

e performing any maintenance operation, isolate the hood fre performing any maintenance operation, isolate the hood fr

e performing any maintenance operation, isolate the hood fr

om theom the

om the

electrical supply by switching ofelectrical supply by switching of

electrical supply by switching of

f at the connector and rf at the connector and r

f at the connector and r

emoving the connectoremoving the connector

emoving the connector

fuse.fuse.

fuse.

Or if the appliance has been connected thrOr if the appliance has been connected thr

Or if the appliance has been connected thr

ough a plug and socket, then theough a plug and socket, then the

ough a plug and socket, then the

plug must be rplug must be r

plug must be r

emoved fremoved fr

emoved fr

om the socket.om the socket.

om the socket.

When washing the metal grease filter

in the dishwasher a slight

discolouration of the filter can occur,

this does not have any impact on its

performance.

• Never use corrosive, abrasive or

flammable cleaning products or

products containing bleach.

Metal grMetal gr

Metal gr

ease filterease filter

ease filter

• The purpose of the grease filters is to

absorb grease particles which form

during cooking and it

mustmust

must always be

used, either in the external extraction

or internal re-circulation function.

Attention:Attention:

Attention: the metal grease filters

must be removed and washed, either

by hand or in the dishwasher, every

four weeks.

Removing the metal grRemoving the metal gr

Removing the metal gr

ease filterease filter

ease filter

• Use the spring handle and remove

the filter downward.

Hand washingHand washing

Hand washing

Soak grease filters for about one hour

in hot water with a grease-loosening

cleaner, then rinse off thoroughly with

hot water. Repeat the process if

necessary. Refit the grease filters

when they are dry.

DishwasherDishwasher

Dishwasher

Place grease filters in the dishwasher.

Select most powerful washing

programme and highest temperature,

at least 65°C. Repeat the process.

Refit the grease filters when they are

dry.

electrolux electrolux

electrolux maintenance and care

1111

11

GB

CharChar

Char

coal filtercoal filter

coal filter

• The charcoal filter should only be

used if you want to use the hood in

recirculation mode.

• To do this you will need an original

charcoal filter (available from your

local Service Force Centre).

•

Replacing the charReplacing the char

Replacing the char

coal filtercoal filter

coal filter

The charcoal filter cannot be washed

nor regenerated.

The charcoal filter should be replaced

every 4 months under normal use.

Replacement filters are available from

your local Service Force Centre.

•

FittingFitting

Fitting

Position the carbon filter inside the

hood to cover the protection grill of

the motor.

Fix the filter with 2 lateral knobs.

•

TT

T

o ro r

o r

emoveemove

emove proceed in the reverse

order.

• Always specify the hood model

number, serial number and product

number code when ordering

replacement filters. This information is

shown on the rating plate located on

the inside of the unit.

• The charcoal filter can be ordered

from your local Service Force Centre.

1212

12

electr electr

electr

oluxolux

olux maintenance and care

GB

WW

W

arar

ar

ningning

ning

• Failure to observe the instructions on

cleaning the unit and changing the

filters will cause a fire hazard. You are

therefore strongly recommended to

follow these instructions.

• The manufacturer declines all

responsibility for any damage to the

motor or any fire damage linked to

inappropriate maintenance or failure

to observe the above safety

recommendations.

Changing the light bulb(s)Changing the light bulb(s)

Changing the light bulb(s)

•

Disconnect the cooker hood frDisconnect the cooker hood fr

Disconnect the cooker hood fr

omom

om

the mains supplythe mains supply

the mains supply

..

.

••

•

Prior to touching the light bulbsPrior to touching the light bulbs

Prior to touching the light bulbs

ensurensur

ensur

e they have cooled down.e they have cooled down.

e they have cooled down.

• Remove the damaged lamp.

• Replace the old bulb with a new one

of the same type.

• If the light does not come on, make

sure the bulb has been inserted in

correctly before contacting your local

Service Force Centre.

20W max20W max

20W max

GU4 - 12 V - Ø 35mm - 30°

electrolux electrolux

electrolux maintenance and care

1313

13

GB

Cleaning the hoodCleaning the hood

Cleaning the hood

• Clean the outside of the hood using a

damp cloth and a solution of water

and mild washing up liquid.

• Never use corrosive, abrasive or

flammable cleaning products or

products containing bleach.

• Never insert pointed objects in the

motor’s protective grid.

• Only ever clean the switch panel and

filter grill using a damp cloth and mild

washing up liquid.

• Clean all the plastic parts with a soft

cloth soaked in warm water and

neutral soap.

• It is extremely important to clean the

unit and change the filters at the

recommended intervals. Failure to do

so will cause grease deposits to build

up that could constitute a fire hazard.

1414

14

electr electr

electr

oluxolux

olux special accessories

GB

Special accessories

CharChar

Char

coal filter coal filter

coal filter Type 15

Something Not Working

If your appliance fails to work properly please carry out the following checks.

SymptomSymptom

Symptom

The cooker hood will not start...

The cooker hood is not working

The cooker hood has switched off

during operation...

SolutionSolution

Solution

Check that: Check that:

Check that: The hood is connected

to the electricity supply.

Check that a fan speed has been

selected.

Check that: Check that:

Check that: The fan speed is set high

enough for the task.

The grease filters are clean.

The kitchen is adequately vented to

allow the entry of fresh air.

If set up for recirculation, check that

the charcoal filter is still effective.

If set up for extraction, check that the

ducting and outlets are not blocked.

The safety cut-out device has been

tripped. Turn off the hob and then

wait for the device to reset. If the

hood has been installed below the

heights indicated in the installation

instructions the motor will cut-out

frequently which will damage the

hood.

If after all these checks, the problem persists, contact your local Service Centre,

quoting the model number, serial number and product number code.

Please note that it will be necessary to provide proof of purchase for any in-

guarantee service calls.

In-guarantee customers should ensure that the above checks have been made as

the engineer will make a charge if the fault is not a mechanical or electrical

breakdown.

electrolux electrolux

electrolux installation

1515

15

GB

InstallationInstallation

Installation

TT

T

echnical Detailsechnical Details

echnical Details

EFC 90990EFC 90990

EFC 90990

Dimensions (in cm):Dimensions (in cm):

Dimensions (in cm):

Height: 84,6-114,8

Width: 89,8

Depth: 37,4

Max. absorb. power:Max. absorb. power:

Max. absorb. power:

215 W215 W

215 W

Motor: 175 W

Lighting: 2 x 20 W

Length of the cable: 150 cm

Electrical connection:Electrical connection:

Electrical connection:

220-240 V220-240 V

220-240 V

Fuse rating:Fuse rating:

Fuse rating:

5A5A

5A

TT

T

Mounting accessories includedMounting accessories included

Mounting accessories included

22

2 screwdriver inserts (to tighten torx screws)

11

1 deflector (3 pieces to be mounted)

11

1 connection ring

11

1 stack bracket (3 pieces to be mounted)

66

6 Ø 8 mm dowels (for fixing the hood to the wall)

66

6 5 x 45 screws (for fixing the hood to the wall)

22

2 washers

44

4 2.9 x 6.5 screws (to fix the stack)

1616

16 3.5 x 9.5 screws (2 to fix the connection ring, 8 to fix the lower section of the

hood to the motor unit, 6 to assemble and fix the deflector)

44

4 4 x 8 screws (to fix the stack bracket)

11

1 power supply cable

1616

16

electr electr

electr

oluxolux

olux installation

GB

Electrical connectionElectrical connection

Electrical connection

Safety warSafety war

Safety war

nings for the electriciannings for the electrician

nings for the electrician

The mains power supply must

correspond to the rating indicated on

the plate situated inside the hood. If

provided with a plug connect the hood

to a socket in compliance with current

regulations and positioned in an

accessible area. If it not fitted with a

plug (direct mains connection) or if the

plug is not located in an accessible

area apply a double pole switch in

accordance with standards which

assures the complete disconnection of

the mains under conditions relating to

over-current category III, in accordance

with installation instructions.

WW

W

arar

ar

ning! ning!

ning! Before re-connecting the

hood circuit to the mains supply and

checking the efficient function, always

check that the mains cable is correctly

assembled.

electrolux electrolux

electrolux installation

1717

17

GB

InstallationInstallation

Installation

WW

W

arar

ar

ning! Do not connect the appliance to the mains until the installation is fullyning! Do not connect the appliance to the mains until the installation is fully

ning! Do not connect the appliance to the mains until the installation is fully

complete.complete.

complete.

• Remove the grease filter and the

charcoal filter.

••

• Drawing a line on the wall with a

pencil up to the ceiling,

corresponding to the centre line, will

make the installation operations

easier.

••

• Apply the perforation diagram to the

wall: the vertical centre line printed on

the perforation diagram should

correspond to the centre line drawn

on the wall. In addition, the lower

edge of the perforation diagram

corresponds to the lower edge of the

hood.

••

• Make holes as indicated on the

template, insert the wall dowels and

screw 2 screws into the upper holes,

leaving a space of about 1 cm

between the head of the screw and

the wall.

Note:Note:

Note: Always make the holes

indicated on the template. The upper

2 are for hooking the hood up while

the lower holes are for the definitive

and safety fixing.

= =

Ø 8

5x45

Ø 8

1818

18

electr electr

electr

oluxolux

olux installation

GB

Assembling the chimney flue

support/bracket (3 parts)

The three parts should be fixed with 4

screws, the support extension is

adjustable and should correspond to

the internal width of the telescopic

chimney flue.

Assembling the deflector (3 parts –Assembling the deflector (3 parts –

Assembling the deflector (3 parts –

only for filter version):only for filter version):

only for filter version):

The three parts should be fixed with 2

screws, the deflector extension is

adjustable and should correspond to

the width of the chimney flue support,

to which it is then fixed.

=

X

G

4 x Ø 4x8

=

X

F

G

6 x

Ø 3,5 x 9,5

electrolux electrolux

electrolux installation

1919

19

GB

••

• Apply flues support bracket to the

wall touching the ceiling. Use the

flues support bracket as a perforation

diagram (the small slot in the support

must coincide with the line previously

drawn on the wall, if present), and

mark two holes with a pencil. Make

the holes and insert 2 dowels.

••

• Fix the flues support bracket to the

wall with 2 screws.

••

• Hang the hood to the two upper

screws.

Ø 8

Ø 5x45

Ø 8

2020

20

electr electr

electr

oluxolux

olux installation

GB

• Fix the coupling ring to the flue

opening with 2 screws.

• Remove and keep the 2 screws

located in front of the flue opening.

• Remove the adhesive tape that

temporarily fixes the electronic box to

the suction motor unit.

• Turn the electronic box to face

upwards.

• Fix the box to the motor unit using

the 2 screws that were previously

removed.

• Insert the power supply cable into the

electronic box and carry out the

electrical connection.

electrolux electrolux

electrolux installation

2121

21

GB

• Insert the lower section of the hood

onto the motor unit.

• Carry out the electrical connections

between the two parts.

Place the cables against the motor

unit in such a way as to prevent them

from being damaged when installing

the telescopic stack.

• Secure the lower section of the hood

to the motor unit using 8 screws.

• Fix the hood permanently with 2

screws and washers (mandatory

fixing); check that the hood is

correctly aligned before tightening all

the upper and lower fixing screws.

••

• Connect a tube (tube and bands for

fixing not supplied, to be purchased)

for discharging the fumes to the

connection ring placed over the

aspiration motor unit.

The other end of the tube should be

connected to a device for expelling

fumes on the outside of the hood in

the aspiration version.

2x5x45

8 x 3,5x9,5

2222

22

electr electr

electr

oluxolux

olux installation

GB

••

• If you want to use the filtering version,

fix deflector to flues support bracket

and connect the other end of the

tube to the connection ring placed on

deflector.

••

• Apply the flues and fix them above

with 2 screws to flues support

bracket.

••

• Slide the lower section of the flue

down to cover the aspiration set until

inserting it completely into the

apposite housing over the hood.

• Fix the lower section of the stack with

2 screws.

• Remount the charcoal filter (only on

recirculation versions) and the grease

filter.

4x2,9x6,5

4x3,5x9,5

Page is loading ...

Electrolux EFC90990X User manual

Related papers

Other documents