AIC SB102-SP User manual

UM_Spica_v1.5_012020

Spica

Server Motherboard

User's Manual

Contents

Preface �� i

Safety Instructions �� ii

About This Manual �� iii

Chapter 1� Product Features ��1

1.1 Components .............................................................................................1

1.2 Specications ..........................................................................................2

1.3 Feature .....................................................................................................3

Chapter 2� Hardware Setup ��4

2.1 Central Processing Unit Setup ............................................................... 4

2.1.1 Processor Installation ........................................................................................4

2.2 System Memory Setup ............................................................................7

2.2.1 DIMM Installation ...............................................................................................7

2.2.2 DIMM Location ...................................................................................................8

2.2.3 DIMM Slot Installation Order..............................................................................9

Chapter 3� Hardware Settings �� 11

3.1 Motherboard Block Diagram ................................................................. 11

3.2 Motherboard Content List .....................................................................12

3.3 Motherboard Layout ..............................................................................13

3.4 Connector and Jumper ..........................................................................14

Chapter 4. BIOS Conguration Settings �� 16

4.1 Navigation Keys .....................................................................................16

4.2 BIOS Menu .............................................................................................17

4.3 Main ....................................................................................................... 18

4.3.1 Main .................................................................................................................. 18

4.4 Advanced ...............................................................................................19

4.4.1 iSCSI Conguration ......................................................................................... 19

4.4.2 Intel® Virtual RAID on CPU ............................................................................. 20

4.4.3 Trusted Computing .......................................................................................... 20

4.4.4 APCI Settings ................................................................................................... 20

4.4.5 Hardware Health Conguration ...................................................................... 20

4.4.6 Onboard Device Conguration ........................................................................ 20

4.4.7 AST2500 Super IO Conguration .................................................................... 21

Table of Contents

4.4.8 S5 RTC Wake Settings ..................................................................................... 21

4.4.9 Serial Port Console Redirection ...................................................................... 21

4.4.10 Option ROM Dispatch Policy ........................................................................ 22

4.4.11 PCI Subsystem Settings ................................................................................ 22

4.4.12 Network Stack Conguration ........................................................................ 23

4.4.13 CSM Conguration ........................................................................................ 23

4.4.14 USB Conguration ......................................................................................... 23

4.4.15 NVDIMM ADR Conguration ......................................................................... 24

4.5 Platform Conguration .......................................................................... 25

4.5.1 Platform Conguration .................................................................................... 25

4.5.2 PCH Conguration .......................................................................................... 26

4.5.3 Miscellaneous Conguration ......................................................................... 27

4.5.4 Server ME Conguration ................................................................................ 27

4.6 Socket Conguration .............................................................................28

4.6.1 Socket Conguration ....................................................................................... 28

4.6.2 Processor Conguration ................................................................................ 29

4.6.3 Common RefCode Conguration .................................................................... 29

4.6.4 UPI Conguration ............................................................................................ 29

4.6.5 Memory Conguration ..................................................................................... 30

4.6.6 IIO Conguration ............................................................................................. 30

4.6.7 Advanced Management Power Conguration ............................................... 32

4.7 Server Management ..............................................................................33

4.7.1 Server Management ........................................................................................ 33

4.7.2 System Event Log ............................................................................................ 34

4.7.3 BMC Network Conguration ........................................................................... 34

4.8 Security ..................................................................................................35

4.8.1 Security ............................................................................................................ 35

4.9 Boot ........................................................................................................37

4.9.1 Boot .................................................................................................................. 37

4.9.2 Delete Boot Option ......................................................................................... 37

4.10 Save and Exit ........................................................................................38

4.10.1 Save and Exit.................................................................................................. 38

Chapter 5. BMC Conguration Settings �� 39

5.1 Login .......................................................................................................39

Contents

5.2 Web GUI ................................................................................................40

5.2.1 Menu Bar .......................................................................................................... 40

5.2.2 User Information and Quick Button ............................................................... 41

5.2.3 Dashboard ........................................................................................................ 42

5.2.4 Sensor .............................................................................................................. 42

5.2.5 System Inventory ............................................................................................. 43

5.2.6 FRU Information ............................................................................................... 43

5.2.7 Logs and Reports ............................................................................................ 44

5.2.8 Settings ............................................................................................................ 45

5.2.9 Remote Control ................................................................................................ 47

5.2.10 Power Control ................................................................................................ 52

5.2.11 Chassis Identify Control ................................................................................ 53

5.2.12 Set Front Panel Enables ................................................................................ 53

5.2.13 Maintenance .................................................................................................. 54

5.2.14 Sign out .......................................................................................................... 56

Chapter 6� Technical Support �� 57

Contents

Document Release History

Release Date Version Update Content

August,

2018

1 User's Manual release to public

November

2018

1.2

1. New Cover

2. Specications update

January

2019

1.3 BMC update

Febuary

2019

1.4 Motherboard layout update

January

2020

1.5 Hardware update.

Contents

This document contains proprietary information about

AIC products and is not to be disclosed or used except in

accordance with applicable agreements.

Copyright

No part of this publication may be reproduced, stored in a retrieval system, or

transmitted in any form or by any means, electronic, mechanical, photo-static, recording

or otherwise, without the prior written consent of the manufacturer.

Trademarks

All products and trade names used in this document are trademarks or registered

trademarks of their respective holders.

Changes

The material in this document is for information purposes only and is subject to change

without notice.

Warning

1. A shielded-type power cord is required in order to meet FCC emission limits and also

to prevent interference to the nearby radio and television reception. It is essential

that only the supplied power cord be used.

2. Use only shielded cables to connect I/O devices to this equipment.

3. You are cautioned that changes or modifications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

Disclaimer

AIC shall not be liable for technical or editorial errors or omissions contained herein.

The information provided is provided "as is" without warranty of any kind. To the

extent permitted by law, neither AIC or its afliates, subcontractors or suppliers will be

liable for incidental, special or consequential damages including downtime cost; lost

profits; damages relating to the procurement of substitute products or services; or

damages for loss of data, or software restoration. The information in this document

is subject to change without notice.

Preface

i

ii

When installing, operating, or performing maintenance on this equipment, the following

safety precautions should always be taken into account in order to reduce the risk of re,

electric shock, and personal injury.

Carefully read the safety instructions below before using this product.

• Observe all of the warning and instruction signs distinctively marked on the product.

• Before performing system installations, please consult the User’s Manual provided

with this product.

• Do not place this product on an uneven or weak surface (unstable cart, stand, table,

ect.) that might induce the product to fall and sustain serious damage.

• Install only the equipment or device identied in the User’s Manual. Deploying other

equipment or device with this motherboard could invoke improper connection of

circuitry that leads to re or personal injury.

• This product should only be operated with the type of power source indicated on the

marked label. If you are questionable about which type of power supply is used in your

area, consult your dealer or local Power Company.

• Disconnect the power supply module before removing power from the system.

• Unplug this product from the wall outlet before cleaning. Use a damp cloth for

cleaning. Do not use liquid cleaners or aerosol cleaners.

• Do not use this product near a water source, including faucet and lavatory.

• Never spill liquids of any kind on this product.

• Never shove objects of any kind into this product’s open slots, as they may touch

dangerous voltage points or short out parts and could result in re or electric shock.

• Do not block or cover slots and openings in this unit, as they were made for ventilation

and prevent this unit from overheating. Do not place this product in a built-in

installation unless proper ventilation is available.

• Do not disassemble this product. This product should only be taken apart by trained

personnel. Opening or removing covers and circuit boards may expose you to electric

shock or other risks. Incorrect reassembly can also cause electric shock when the

unit is subsequently used.

• Risk of explosion is possible if battery is replaced with an incompatible type. Dispose

of used batteries accordingly.

• This product is equipped with a three-wire grounding type plug, a plug with a third

(grounding) pin. As a safety feature, this plug is intended to t only into a grounding

type power outlet. If you are unable to insert the plug into the outlet, contact your

electrician to replace the outlet. Do not remove the grounding type plug or use a

3-Prong To 2-Prong Adapter to circumvent the safety feature; doing so may result in

electric shock and/or damage to this product.

Safety Instructions

iii

Thank you for selecting and purchasing the Spica Serverboard.

This user's manual is provided for professional technicians to perform easy hardware

setup, basic system configurations, and quick software startup. This document

pellucidly presents a brief overview of the product design, device installation, and

rmware settings for the Spica motherboard. For the latest version of this user's manual,

please refer to the AIC website: http://www.aicipc.com/en/productdetail/51077.

Chapter 1 Product Features

This chapter delivers the overall layout of the product, including the fundamental

components on the motherboard, design specications, and noteworthy features. Spica

is an ideal server grade motherboard that is specifically designed to accommodate

diverse enterprises for managing heavy workloads, databases, nearline applications,

and cloud deployments. This product supports the Intel® Xeon® Scalable Processor

and Socket P0 socket type with a memory support 12 DDR4 2400/2666 MHz accross 6

channels per CPU.

Chapter 2 Hardware Setup

This chapter displays an easy installation guide for assembling the CPU (Central

Processing Unit) and memory chip. Utmost caution for proceeding to set up the

hardware is highly advised. The components on the motherboard are highly fragile and

vulnerable to exterior influence. Do not attempt to endanger the device by placing the

device in a potentially unstable or hazardous surroundings, including positioning the

device on an uneven grounds or humid environments.

Chapter 3 Motherboard Settings

This chapter elaborates the overall layout of the server motherboard, including

multifarious connectors, jumpers, and LED descriptions. These descriptions assist

users to configure different settings and functions of the motherboard, as well as to

conrm the location of each connector and jumper.

Chapter 4 BIOS Conguration Settings

This chapter introduces the key features of BIOS, including the descriptions and option

keys for diverse functions. These details provide users to effortlessly navigate and

congure the input/output devices.

Chapter 5 BMC Conguration Settings

This chapter illustrates the diverse functions of IPMI BMC, including the details on

logging into the web page and assorted denitions. These descriptions are helpful in

configuring various functions through Web GUI without entering the BIOS setup. For

more information of BMC congurations, please refer to IPMI BMC (Aspeed AST2500)

User's Manual for a more detailed description.

Chapter 6 Technical Support

For more information or suggestion, please contact the nearest AIC corporation

representative in your district or visit the AIC website: http://www.aicipc.com/en. It is

our greatest honor to provide the best service for our customers.

iii

About This Manual

1

Chapter 1. Product FeaturesSpica User Manual

This section describes the hardware specications and features of the Spica motherboard.

The fundamental components of the Spica severboard are provided below.

1�1 Components

Spica Serverboard

Product specications and features are subject to change without prior notice.

2 x 10G SFP+

(Optional)

2 x GbE

RJ45 ID Button

2 x PCI-E Gen.3 x16 slots

5 x PCI-E Gen.3 x 8 slots

VGA Port

2 x USB 3.0 + RJ45

dedicated NIC for BMC

14 x SATA 6G

(2 by 7pin SATA connectors

12 by 3 x mini-SAS HD)

6 x DDR4 DIMM Slots

6 Channel (for CPU1)

6 x DDR4 DIMM Slots

6 Channel (for CPU0)

LGA3647 Socket P0 for

Intel

®

Xeon

®

Processor

Skylake-SP (CPU0)

LGA3647 Socket P0 for

Intel

®

Xeon

®

Processor

Skylake-SP (CPU1)

Spica User Manual

Chapter 1� Product Features

2

Chapter 1. Product FeaturesSpica User Manual

1.2 Specications

3

Chapter 1. Product FeaturesSpica User Manual

The Spica server board offers the latest Xeon® Scalable Processors technology. This

product features: solutions with compelling performance and provides premium power

efficiency, which is optimized for efficient performance platforms (storage, security and

communications infrastructure).

By implementing Intel® Xeon® Scalable Processors, fully integrated microarchitecture,

the Spica server board delivers unmatched performance, providing six channels of DDR4

2400/2666 MHz per socket (feature support up to DDR4 2933 MHz by next gen. process

upgrade), dual 10GbE SFP+ and two GbE RJ45 power by Intel® Ethernet Controller I350.

Featured with ground breaking technologies including Intel® Next Generation

Microarchitecture and Instruction Set (AVX-512, VMD, QAT - optional by PCH SKU), Speed

Shift Technology, UPI link speeds up to 10.4GT/s, the Spica server board enable next

generation server solutions with an incredible leap in performance in a standard EATX form

factor platform.

• Supports Intel® Xeon® Scalable Processors (Platinum, Gold, Silver, Bronze) for

highest server performance and improved power efciency

• Supports 2 x PCI-E Gen3 x16 slots + 5 x PCE-E Gen3 x8 slots

• Supports up to 14 SATA 6Gb/s ports

• Onboard dual ports 10GbE SFP+ supported by Intel® Lewisburg PCH, and comes with

Intel® Ethernet Controller I350 to support two GbE ports

• Onboard Baseboard Management Controller for system management and IPMI

control

1�3 Feature

4

Chapter 2. Hardware Setup

Spica User Manual

Chapter 2� Hardware Setup

This section describes a simple instruction guide for installing the hardware

components on the serverboard system. Turn off and unplug all system and

peripheral devices before proceeding.

2�1 Central Processing Unit Setup

The serverboard supports dual Xeon scalable processors and Socket P0

(LGA-3647).

2�1�1 Processor Installation

To ensure a safe and easy setup, you need to prepare before installation:

 a T20 Torx screwdriver

 ESD wrist strap/mat and conductive foam pad

CAUTION

The pins of the processor socket are vulerable and easily susceptible to damage if ngers or any

foreign objects are pressed against them. Please keep the socket protective cover on when the

processor is not installed.

CAUTION

When unpacking a processor, hold the processor only by its edges to avoid touching the contacts.

Standard Processor Assembly:

A standard processor assembly is comprised of PHM(Processor Heat sink

Module) components and processor socket assembly.

Heat sink

Standard

Processor Clip

Standard

Processor

Bolster Plate

Precsessor

Socket

PHM Components

Processor

Socket Assembly

5

Chapter 2. Hardware SetupSpica User Manual

Processor Socker Assembly:

The server board includes two processor sockets (LGA-3647), supports

two Intel® Xeon® Processor Scalable Family and has a Thermal Design

Power (TDP) of up to 165W on selected models.

PHM (Processor Heat sink Module) Component:

Non Frabic

Processor

Non Frabic

Processor Clip

Heat sink

6

Chapter 2. Hardware Setup

Spica User Manual

PHM Screw Installation Order:

The PHM sits level with the processor socket assembly. The PHM is

NOT installed properly if it does not sit level with the processor socket

assembly. Once the PHM is seated over the processor socket assembly,

the four heat sink torque screws must be secured in the following order as

shown below.

Processor Heat Sink – Top View with Screw Tightening Order

NOTE

Failure to tighten the heat sink screws in the specied order may cause damage to the

processor socket assembly. Heat sink screws should be tighted to 12 in-lbs torque

according to the ndicated order on the top of the heat sink label.









7

Chapter 2. Hardware SetupSpica User Manual

2�2 System Memory Setup

This server board supports 12 DIMM memory slots with 6 channel per CPU.

2�2�1 DIMM Installation

Step 1 Unlock the dimm socket by pressing the retaining clips outward.

Step 2 Insert the memory module into the slot. Make sure that the DIMM notch is

accurately positioned.

Step 3 Close the retaining clips to complete installation.

DIMM n

otch

8

Chapter 2. Hardware Setup

Spica User Manual

2�2�2 DIMM Location

The DIMMs are displayed on the Spica board as DIMM C0, DIMM B0, DIMM A0, DIMM

D0, DIMM E0, DIMM F0, DIMM C1, DIMM B1, DIMM A1, DIMM D1, DIMM E1, and DIMM

F1.

To ensure satisfactory performance, you need to:



Verify the DIMM type: DDR4 ECC RDIMM/LRDIMM 2666/2400/2133



Verify if all of the DIMMs installed are of the same DIMM type to avoid

memory failure and loss of performance speed.

CPU0

CPU1

DIMM_C0

DIMM_B0

DIMM_A0

DIMM_D0

DIMM_E0

DIMM_F0

DIMM_C1

DIMM_B1

DIMM_A1

DIMM_D1

DIMM_E1

DIMM_F1

Battery

BMC

BIOS

PCIe_7 (x8)

PCIe_6 (x16)

PCIe_5 (x8)

PCIe_4 (x16)

PCIe_3 (x8)

PCIe_2 (x8)

PCIe_1 (x8)

9

Chapter 2. Hardware SetupSpica User Manual

2�2�3 DIMM Slot Installation Order

Populate the DIMM slots according to the suggested order below to ensure a

stable system performance.

DIMM_C1

DIMM_B1

DIMM_A1

DIMM_C0

DIMM_B0

DIMM_A0

DIMM_D1DIMM_D1

DIMM_D0DIMM_D0

DIMM_F0DIMM_F0

DIMM_E0DIMM_E0DIMM_E1DIMM_E1

DIMME_F1DIMME_F1

DIMM_C1DIMM_C1

DIMM_B1DIMM_B1

DIMM_A1DIMM_A1

DIMM_C0DIMM_C0

DIMM_B0DIMM_B0

DIMM_A0DIMM_A0

CPU 1 CPU0

6 DIMM

CPU 1C PU 0

DIMM_B1

DIMM_A1

DIMM_B0

DIMM_A0

DIMM_D1DIMM_D1

DIMM_D0DIMM_D0

DIMM_F0DIMM_F0

DIMM_E0DIMM_E0DIMM_E1DIMM_E1

DIMME_F1DIMME_F1

DIMM_C1DIMM_C1

DIMM_B1DIMM_B1

DIMM_A1DIMM_A1

DIMM_C0DIMM_C0

DIMM_B0DIMM_B0

DIMM_A0DIMM_A0

CPU 1 CPU0

4 DIMM

CPU 1 CPU 0

DIMM_A1

DIMM_A0

DIMM_D1DIMM_D1

DIMM_D0DIMM_D0

DIMM_F0DIMM_F0

DIMM_E0DIMM_E0DIMM_E1DIMM_E1

DIMME_F1DIMME_F1

DIMM_C1DIMM_C1

DIMM_B1DIMM_B1

DIMM_A1DIMM_A1

DIMM_C0DIMM_C0

DIMM_B0DIMM_B0

DIMM_A0DIMM_A0

CPU 1 CPU0

2 DIMM

CPU 1C PU 0

DIMM_B1

DIMM_A1

DIMM_D1

DIMM_C0

DIMM_B0

DIMM_A0

DIMM_D1DIMM_D1

DIMM_D0DIMM_D0

DIMM_F0DIMM_F0

DIMM_E0DIMM_E0DIMM_E1DIMM_E1

DIMME_F1DIMME_F1

DIMM_C1DIMM_C1

DIMM_B1DIMM_B1

DIMM_A1DIMM_A1

DIMM_C0DIMM_C0

DIMM_B0DIMM_B0

DIMM_A0DIMM_A0

CPU 1 CPU0

8 DIMM

CPU 1C PU 0

DIMM_C1

DIMM_D0

10

Chapter 2. Hardware Setup

Spica User Manual

DIMM_A1

DIMM_D1

DIMM_E1

DIMM_C0

DIMM_B0

DIMM_A0

DIMM_D1DIMM_D1

DIMM_D0DIMM_D0

DIMM_F0DIMM_F0

DIMM_E0DIMM_E0DIMM_E1DIMM_E1

DIMME_F1DIMME_F1

DIMM_C1DIMM_C1

DIMM_B1DIMM_B1

DIMM_A1DIMM_A1

DIMM_C0DIMM_C0

DIMM_B0DIMM_B0

DIMM_A0DIMM_A0

CPU 1 CPU0

10 DIMM

CPU 1 CPU 0

DIMM_C1

DIMM_B1

DIMM_A1

DIMM_D0

DIMM_E0

DIMM_F0

DIMM_D1DIMM_D1

DIMM_D0DIMM_D0

DIMM_F0DIMM_F0

DIMM_E0DIMM_E0DIMM_E1DIMM_E1

DIMME_F1DIMME_F1

DIMM_C1DIMM_C1

DIMM_B1DIMM_B1

DIMM_A1DIMM_A1

DIMM_C0DIMM_C0

DIMM_B0DIMM_B0

DIMM_A0DIMM_A0

CPU 1 CPU0

12 DIMM

CPU 1 CPU 0

DIMM_D1

DIMM_A0

DIMM_E0

DIMM_B1

DIMM_C1

DIMM_D0

DIMM_B0

DIMM_C0

DIMM_E1

DIMM_F1

11

Chapter 3. Motherboard SettingsSpica User Manual

This section provides illustrations that display the internal jumpers, connectors, and

system LED indicators on the Spica motherboard. The motherboard layout and essential

connectors are listed below for your reference.

3�1 Motherboard Block Diagram

Chapter 3� Hardware Settings

Page is loading ...

AIC SB102-SP User manual

This manual is also suitable for

AIC SB102-SP User manual

Related papers

Other documents