Ohlins MIR18013 Mounting Instruction

Brand: Ohlins

Model: MIR18013

Type: Mounting Instruction

SUPPLEMENTARY INFORMATION

for Mitsubishi Lancer Evo V group N tarmac shock absorbers

MIR 18013, MIR 28013, MIR 38013, MIR 48013

The EVO V / VI gravel shock absorbers differ from

the EVO IV gravel units covered in the rally manual

on the following points: (The paragraph and page in

the rally manual are noted for reference.)

Picture 7, page 5:

The camber angles are different, but the step between

each bushing is still 0.4°.

Kit contents, page 5:

Your Öhlins rally shock absorbers have the following

markings:

Left front: MIR 18013

Right front: MIR 28013

Left rear: MIR 38013

Right rear: MIR 48013

Recommended settings, page 5:

Front:

Camber -3°

Spring preload 22 mm

Compression clicks 7

Rebound clicks 12

Rear:

Spring preload 30 mm

Compression clicks 7

Rebound clicks 12

Mounting instructions

Rear shock absorbers, page 6:

Points 2 and 5 including warning are deleted.

Setting up your car, pages 7:

The warning is deleted.

Technical specifications, page 7:

Front:

Stroke 146 mm

Spring rate 90 N/mm

Rear:

Spring rate 70 N/mm

Spare parts shock body front, page 8:

Pos. Part No. Pcs.

12 5177-27 1

Spare parts piston shaft front, page 8:

Pos. Part No. Pcs.

2 578-01 1

7 519-04 1

17 1069-02 2

18 1069-03 1

18A 1069-10 4

Spare parts shock body rear, page 9:

Pos. Part No. Pcs.

1 5179-01 1

2 688-19 1

3 131-04 1

Spare parts piston shaft rear, page 9:

Pos. Part No. Pcs. Descr.

9 5017-01 1

9a 338-84 1 O-ring

21 1069-02 2

22 1069-03 1

22A 1069-10 5

23 5500-04 1

26 5521-03 1

27 519-04 1

31 519-02 1

32 578-01 1

Ohlins MIR18013 Mounting Instruction

Ohlins MIR18013 Mounting Instruction

Ohlins MIR18013 Mounting Instruction

Related papers

Other documents