Du Ha 40011 User guide

Category
Equipment cases
Type
User guide
Installation Instructions:
Flip up the bottoms of the back seats.
Thread nylon straps through the seat belt loops under the back seats, by sliding straps
through the backside of seat belt loops, so the buckles end up on top.
Place the DU-HA under the back seats with the high side forward.
Thread nylon straps through the slots in the back of the DU-HA.
Loop each strap together by threading up through the bottom of the back slot of the
buckle and down through the front slot of the buckle. Tighten as pictured. The nylon
straps help secure the DU-HA in the truck.
Install the dividers in the DU-HA by sliding them into the channel slots in the DU-HA.
Install the foam organizer/gun racks with the plastic stiffeners by sliding them into the
pre-cut slots in the dividers (as pictured below).
Safety Instructions:
Warning: Seat must be down and latched at all times while vehicle is moving.
Make sure DU-HA is secured according to the installation instructions.
Do not store explosives or hazardous materials in
the DU-HA. Do not place loaded guns in the DU-HA.
For further instructions refer to truck owners
manual or contact DU-HA, Inc.
2004-2014 Nissan Titan King Cab & Crew Cab
Underseat Storage
Installation Instructions
DU-HA, Inc. // website: www.du-ha.com // phone: 1.866.306.DUHA (3842) // fax: 1.218.998.4013 // 306 Saint Andrews Street South, Fergus Falls, MN 56537
1
2
3
4
5
1
2
3
6
Ribs on buckle should face up. Thread
strap through buckle as shown.
This is how the DU-HA should look
installed under the back seat.
4
6
A
B
E
C
D
Fits DU-HA Part Numbers
40010
40011
40057
Part Description Qty
A DU-HA Storage Unit 1
B Divider 2
C Foam Organizer / Gun Rack 2
D Plastic Stiffener 2
E Nylon Strap with Buckle 2
5
DIVIDER – 40010
  • Page 1 1

Du Ha 40011 User guide

Category
Equipment cases
Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI