2. NEC
  3. E321
E321

NEC E321 Installation and Setup Guide

  • Hello! I am an AI chatbot trained to assist you with the NEC E321 Installation and Setup Guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 1 of 8
Contents:
Product Description and Notes Page 1
Ventilation Requirements Page 2
Display Dimensions
Front, Top & Right Side Page 3
Rear Page 4
Display Dimensions with Stand Page 5
Optional Wall Mount Dimensions (WMK-3260L) Page 6
Optional Wall Mount Dimensions (WMK-3257) Page 7
Input Panels Page 8
Product Description:
Type: LCD Display Screen Surface: Anti-Reflective
Resolution: 1366 x 768 Dimensions without stand: 30.8”(W) x 20.1”(H) x 3.7”(D)
Aspect Ratio: 16:9 Dimensions with stand: 30.8”(W) x 22.0”(H) x 8.3”(D)
FCC: Class B Weight without stand: 22.5 lbs
Power Consumption: 150W (typ) Weight with stand: 24.9 lbs
BTU’s: 511.82 BTU/hour
NOTES:
• This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
• Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
• This unit is built to sustain Landscape orientation only.
• 4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see “Aspect Modes” in menus and user manual).
• Distances are in inches, for millimeters multiply by 25.4.
• Distances may vary ±5%.
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 2 of 8
Ventilation Requirements (all models):
Dimensions below are minimum required for proper ventilation.
NOTE:
• The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be
covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and
recommendations.
WALL
WALL
60mm
2”
0 to 40 degC
32 to 104 degF
WALL
60mm
2”
60mm
2”
60mm
2”
60mm
2”
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 3 of 8
Display dimensions:
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 4 of 8
Display dimensions (cont.):
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 5 of 8
Dimensions with stand:
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 6 of 8
Dimensions with optional Wall Mount Kit (WMK3260-L):
NOTE:
• Some connectivity located on the back control panel is covered when WMK3260-L is in place.
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 7 of 8
Dimensions with optional Wall Mount Kit (WMK-3257):
NEC Display Solutions of America, Inc.
E321 Installation Guide
32” LCD Display
Rev 1.7
www.necdisplay.com E321 Page 8 of 8
Input Panels:
Back
:
Side (Rotated):
/