BrandMotion SUTV-8894 Installation guide

Brand: BrandMotion

Model: SUTV-8894

Type: Installation guide

SummitView™ Jeep Wrangler (JK)

Third Brake Light Add-on

SUTV-8849

Install Time

Recommended Tools

30m

Socket SetScrew Driver Panel Removal Tool Zip Ties

Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE

Installation Instructions - SUTV-8894 Page 1/4AR_03_23_21

Kit A

Components for installing the SUTV-8894

Kit Contents

Vehicle Application:

Jeep Wrangler JK

Part Number: SUTV-8894

Kit Contents:

1x LED Third Brake Light and OE Connector

Installation Instructions - SUTV-8894 Page 2/4AR_03_23_21

Access the Radio

Install the 3rd Brake Light

Part 1

1.

2.

3.

4.

5.

6.

7.

8.

Remove the spare tire

Locate and remove one #1 Philips holding the

camera onto the bracket

Line the mounting hole from the new brake

light bracket up with the mounting hole of the

Camera and mounting bracket and reinstall the

one #1 Philip screws.

Route cable along Camera harness and follow

the same route as factory 3rd brake light harness

to factory opening in rear door.

Remove cover on inside of rear door and unplug

factory 3rd brake light harness and install new

brake light harness.

Unplug factory brake harness and plugin our

replacement harness

Test 3rd Brake Light

Follow disassembly steps in reverse order for

reassembly.

1 2

3 4

5 6

Installation Instructions - SUTV-8894 Page 3/4AR_03_23_21

7

Vehicle Application:

Jeep Wrangler JK

Part Number: SUTV-8894

FAQ Section

Installation of the Rear Vision Camera

WARNING: Cancer and Reproductive Harm -

www.P65Warnings.ca.gov

Installation Instructions - SUTV-8894 Page 4/4AR_03_23_21

Vehicle Application:

Jeep Wrangler JK

Part Number: SUTV-8894

1
2
3
4

BrandMotion SUTV-8894 Installation guide

Brand: BrandMotion

Model: SUTV-8894

Type: Installation guide

Download PDF

Related papers

Other documents