SummitView™ Jeep Wrangler (JK)
Third Brake Light Add-on
SUTV-8849
Install Time
Recommended Tools
30m
Socket SetScrew Driver Panel Removal Tool Zip Ties
Questions? Call the Brandmotion technical support line at (734) 619-1250 or CLICK HERE
Installation Instructions - SUTV-8894 Page 1/4AR_03_23_21
Kit A
Components for installing the SUTV-8894
Kit Contents
Vehicle Application:
Jeep Wrangler JK
Part Number: SUTV-8894
Kit Contents:
1x LED Third Brake Light and OE Connector
Installation Instructions - SUTV-8894 Page 2/4AR_03_23_21
Access the Radio
Install the 3rd Brake Light
Part 1
1.
2.
3.
4.
5.
6.
7.
8.
Remove the spare tire
Locate and remove one #1 Philips holding the
camera onto the bracket
Line the mounting hole from the new brake
light bracket up with the mounting hole of the
Camera and mounting bracket and reinstall the
one #1 Philip screws.
Route cable along Camera harness and follow
the same route as factory 3rd brake light harness
to factory opening in rear door.
Remove cover on inside of rear door and unplug
factory 3rd brake light harness and install new
brake light harness.
Unplug factory brake harness and plugin our
replacement harness
Test 3rd Brake Light
Follow disassembly steps in reverse order for
reassembly.
1 2
3 4
5 6
Installation Instructions - SUTV-8894 Page 3/4AR_03_23_21
7
Vehicle Application:
Jeep Wrangler JK
Part Number: SUTV-8894
FAQ Section
Installation of the Rear Vision Camera
WARNING: Cancer and Reproductive Harm -
www.P65Warnings.ca.gov
Installation Instructions - SUTV-8894 Page 4/4AR_03_23_21
Vehicle Application:
Jeep Wrangler JK
Part Number: SUTV-8894
/
