2. CON-SERV
  3. EB 046 Removing Flow Control
EB 046 Removing Flow Control

CON-SERV EB 046 Removing Flow Control, CON-SERV EB 046 Removing Flow Control User guide

  • Hello! I've reviewed the installation instructions for the CON-SERV Flow Control EB 046 Mii H088 R0. This document details the process of removing the flow control from the spigot, including steps for using required tools . I'm ready to answer your questions about this procedure and related components.
  • What tool is used to unscrew the 5mm grub screw?
    What should be ensured while easing the Wall Outlet Elbow?
    What tool is used to lever circlip?
    Why remove flow control from spigot?
Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
/