CON-SERV CON-SERV EB 046 Removing Flow Control User guide

CON-SERV EB 046 Removing Flow Control
Brand
CON-SERV
Model
CON-SERV EB 046 Removing Flow Control
Type
User guide

This manual is also suitable for

CON-SERV CON-SERV EB 046 Removing Flow Control allows you to remove the flow control from your shower spigot for a full flow shower experience. Easy to use, it comes with all the necessary tools and clear instructions. Simply unscrew the hose conical nut, use the provided 2.5mm hex key to unscrew the 5mm grub screw, ease the Wall Outlet Elbow off the spigot, unscrew the spigot from the thread, lever the circlip from the spigot using a hand tool, and remove the flow control.

CON-SERV CON-SERV EB 046 Removing Flow Control allows you to remove the flow control from your shower spigot for a full flow shower experience. Easy to use, it comes with all the necessary tools and clear instructions. Simply unscrew the hose conical nut, use the provided 2.5mm hex key to unscrew the 5mm grub screw, ease the Wall Outlet Elbow off the spigot, unscrew the spigot from the thread, lever the circlip from the spigot using a hand tool, and remove the flow control.

Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
Removing Flow Control (EB 046)
INSTALLATION INSTRUCTIONS
EB 046 Mii H088 R0NOTE: Remove flow control from spigot for full flow shower.
1 2 3 4 5
2.5mm HEX KEY
5mm GRUB SCREW
THREAD
SPIGOT
WALL FLANGE
Unscrew hose conical nut from Wall
Outlet Elbow.
Use 2.5mm hex key to unscrew
5mm grub screw.
Ease the Wall Outlet Elbow off the
spigot ensuring the grub screw
does not come into contact with the
o-ring seal.
Once spigot has been removed
from thread, use a hand tool to
lever circlip from spigot and
remove flow control.
Once exposed, unscrew the spigot
from the thread using a spanner.
FLOW CONTROL
SPIGOT
CIRCLIP
HAND TOOL
  • Page 1 1

CON-SERV CON-SERV EB 046 Removing Flow Control User guide

CON-SERV EB 046 Removing Flow Control
Brand
CON-SERV
Model
CON-SERV EB 046 Removing Flow Control
Type
User guide
This manual is also suitable for

CON-SERV CON-SERV EB 046 Removing Flow Control allows you to remove the flow control from your shower spigot for a full flow shower experience. Easy to use, it comes with all the necessary tools and clear instructions. Simply unscrew the hose conical nut, use the provided 2.5mm hex key to unscrew the 5mm grub screw, ease the Wall Outlet Elbow off the spigot, unscrew the spigot from the thread, lever the circlip from the spigot using a hand tool, and remove the flow control.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents