Page 1
Noble House Home Furnishings LLC
WARNING!!
Children have died from furniture tipover. Tip restraints
have been included with this product; you must install
the tip restraints according to these instructions in order
to minimize the risk of furniture tipping. If you have any
questions about this product or the tip restraint, please
send us an email at
NEVER allow children to climb or hang on furniture,
including drawers or cabinet doors.
In addition to installing the restrains,to help prevent
tip-over
1. NEVER put a TV or other heavy objects on top of
this product.
2. Do not stand on the product.
WARNING
Children have died from furniture tipover. To reduce
the risk of furniture tipover:
1. ALWAYS install tipover restraint provided.
2. NEVER put a TV on this product.
3. NEVER allow children to stand,climb or hang on drawers,
doors,or shelves.
4. NEVER open more than one drawer at a time.
5. Place heaviest items in the lowest drawers.
6. Do not defeat or remove the drawer interlock system.
This is a permanent label. Do not remove!
Assembly Instructions
Caution: You must read this before you proceed
CONSOLE TABLE
Page 2
Noble House Home Furnishings LLC
Label Picture Description Qty
ATable Top 1
Parts List
CTable Leg 1
DTable Leg 1
ETable Leg 1
FTable Leg 1
BTable Shelf 1
Assembly Preparation
Picture Description Qty
Screwdriver
(not provided)
Hammer
(not provided)
Power Drill
(not provided)
Bracket
Strap
Tipover Restraint
Wall Plug Screw (M5 x 25MM)
Wall Plug (M5 x 35MM)
Label
1
7
6
5
4
3
2
8
9
10
Bolt [8mm]
Allen Wrench [5mm]
Washer [12x8 mm]
1
1
1
2
4
4
2
14
14
1
Hardware
Page 3
Noble House Home Furnishings LLC
Save all packaging until finished
-
Read instructions,cover to cover
Have 2 adults on hand for assembly
Do not assemble on flooring or carpet
Assemble on a clean non-marring surface (packing foam)
-
-
-
-
x 14
x 2
x 4
x 4
x 2
Before
Beginning
Assembly:
1
1
1
1
x
x
x
x
x 14
A
B
C
D
E
F
1
10
9
8
7
2
3
4
5
6
Assembly steps
Overview
Table Top (A)
Table Leg (C)
This Console Table has multiple parts and may
require up to some 30 minutes to assemble.The
above picture is to help you in putting various
parts into perspective.Please read through the
instructions below to familiarise yourself with the
parts and steps before assembly.
Table Shelf (B)
FRONT FACING
Step 1
Unpack all the parts and place them on a
clean non-marring surface.
Table Leg (D)
Table Leg (F)
Table Leg (E)
Page 4
Noble House Home Furnishings LLC
C
D
E
F
A
B
Step 2
Attach Table leg (F) to Table Top(A) using
1
Washer ( ),Bolt ( ),Allen Wrench ( ).
23
Step 3
Repeat “Step 2” to assemble all the other
three Table Legs(C,D,E)to Table Top(A).
With help of your adult partner, carefully
place the Table Top(A) face down as
shown in above diagram,on clean,non-
marring surface.
F
A
3
1
2
Page 5
Noble House Home Furnishings LLC
FE
D
CA
DO NOT TIGHTEN THE BOLTS.
DO NOT TIGHTEN THE BOLTS.
Step 4
Carefully Attach Table Shelf (B) to the Table
Legs using
1
Washer ( ),Bolt ( ),Allen
2
Wrench( ).
3
Step 5
3
1
2
Page 6
Noble House Home Furnishings LLC
A
F
B
E
D
C1 D1
E1
F1
DO NOT TIGHTEN THE BOLTS.
Turn the Console Table right side up.
C
Place the Console Table on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately
connected.
This would help to aligh all the parts at all the joint
areas.
In a sequential manner,proceed to tighten all Bolts.
To tighten the Bolts at the base of the Console Table,
do secure assistance
from your adult partner (s).
You may be required to turn the Console Table, to gain
easy access to the secure points.
Turn the Console Table in a synchronised manner.
CAUTION 1: When tightening these Bolts, tighten
sequentially.
DO NOT tighten any Bolts fully and then towards the
next one.This would cause the frame to warp.
If there is still wobble, loosen the Bolts and execute
this same process.
WARNING!! IF Console Table IS NOT STABLE, IT
COULD LEAD TO DAMAGING THE PRODUCT.
Ensure all Bolts are Fully locked into position.
The Console Table is ready to be use.
CAUTION 2: This Console Table can only be used on
a flat, level surface.
Page 7
Noble House Home Furnishings LLC
Step 6
Step 7
4
With help of your adult partner, carefully stand
the Console Table:
Put out the drawers and deassemble the
knobs with the help of screw driver( ) in Anti-
clockwise direction.
Install the Knobs on the drawer with the help
of screwdriver ( ) in Clockwise as picture
above.
4
4
4
Page 8
Noble House Home Furnishings LLC
44
7
Usage For Tipover Restraint Device:
and product, use Tipover Restraint Strap(
) to connect the Brackets(
).
10
To secure Console Table against wall, attach two Brackets(
) on wall
7
Tipover Restraint Device Installation Instructions
Serious or fatal crushing injuries can occur from tipping furniture.
To help prevent tip-over: ALWAYS secure this furniture to the wall using
Tipover Restraint Device.
See product instructions for more ways to help prevent furniture tip-over.
WARNING
Step 8
Now the Console Table is ready for Tipover
Restraint Device Installation.
Page 9
Noble House Home Furnishings LLC
8
4
7
8
99
Step 9
Screwdriver(
).
Attach Brackets(
) to Wall Plugs(
) using Wall Plug Screws(
) with
798
4
9
5
9.2
6
9.1
Step 10
You can mark these points in two ways as below:
1) Move the Console Table back to the wall. Mark four points same height as
Console Table on the wall.
Note: The Brackets need to be secured to solid, load bearing surface. Please
use a Stud Finder(not supplied) if needed to locate the Wall Frame.
9.2)
Insert Wall Plugs(
) into drilled holes on wall with Hammer(
).
95
wall to keep them accurate and same height.
2) Measure the height of the Brackets(
) with ruler/measuring tape and mark on
7
9.1)
Drill four holes on wall at same height as Brackets(
) on Console Table with
7
Power Drill(
).
6
Page 10
Noble House Home Furnishings LLC
Step 11
Move Console Table to the wall.
This Console Table is now ready to use.
Caution: This Console Table can only be used on flat, level surface.
Console Table one by one, and pull the Tipover Restraint Straps(
) tight.
10
Pull the Tipover Restraint Straps(
) through the Brackets(
) on the wall and
10 7
10
7
7
Page 11
Noble House Home Furnishings LLC
Page 12
Noble House Home Furnishings LLC
/
