Noble House Home Furnishings LLC Page 1/14
In addition to installing the restraints to help
prevent tip-over:
1. Place heaviest items in the lowest drawers.
2. Unless Specifically designed to accommodate
top of this product.
3. Never allow children to climb or hang on
drawers, doors, or shelves.
4. Do no leave drawers open.
5. Never open more than one drawer at a time.
6. Do not step on the base.
Please follow all instructions and install the
tip-over restraints provided.
Children like to climb on furniture and Unsecured
furniture can pose a Serious danger.
Furniture Tipping Risk
Serious risk of severe or fatal crush in juries can
occur from furniture tipping over if not secured.
WARNING !!
SHELF
Caution: This Shelf is NOT a TOY.
Keep your child / children at bay during the assembly process.
Whenever lifting or moving the Shelf and to prevent damage to the Shelf, two adults
may be needed to execute these actions.
Noble House Home Furnishings LLC Page 2/14
Assembly Instructions
CAUTION: You must read this before you proceed.
No. Picture
Description
Qty
A
1
B
C
D
E
Page 3/14
Left Leg Panel
Right Leg Panel
Top Frame
Top Shelf
Bottom Shelf
Noble House Home Furnishings LLC
1
1
1
1
Parts List
No. Picture
Description
Qty
1
Allen Key
Bolt
(M6*20mm)
Washer
Double Threaded
Bolt (M8*30mm)
Page 4/14Noble House Home Furnishings LLC
9
2
L-Shape Metal
Brackets
Shelf Tapping
Screw
(M4*50 mm)
Shelf Restraint
Strap
Screwdriver
(No provided)
5
Hardwave
2
3
3
9
4
1
Cabinet Restraint Device Hardware:
3
6
3
7
1
8
Before Beginning Assembly:
Page 5/14Noble House Home Furnishings LLC
Assembly Preparation
Overview
Page 6/14Noble House Home Furnishings LLC
Assembly Steps
Left Leg Panel
(B)
Top Frame
(A)
Right Leg Panel
(C)
Bottom Shelf
(E)
Right Leg Panel
(C)
This Shelf has multiple parts and may require up to 30
minutes to assemble. To give you an overview of the Shelf
parts, the above picture is to help you put the various parts
into perspective. Please read through the instructions below
to familiarise yourself with the parts and steps before
assembly.
Front Facing
Step 1
Page 7/14Noble House Home Furnishings LLC
Unpack and place all parts on a clean, non-marring surface.
Page 8/14Noble House Home Furnishings LLC
Step 2
4
2
A
B
C
Insert the Top Frame(A) into the Left Leg Panel(B) and Right
Leg Panel(C) as pictured above.
Attach Top Frame(A) to Left Leg Panel(B) and Right Leg
Panel(C) using Bolts() with Allen Key().
Do not fully tighten the Bolts.
A
D
E
C
B
1
3
4
3
4
1
Page 9/14Noble House Home Furnishings LLC
Place the Top Shelf(D) and Bottom Shelf(E) onto the Left Leg
Panel(B) and Right Leg Panel(C).
3.1) Attach Top Shelf(D) to the brackets on Left Leg Panel(B)
and Right Leg Panel(C) using Bolts(
), and Washers() with
Allen Key().
3.2) Attach Bottom Shelf(E) to the brackets on Left Leg
Step 3
3.1
3.2
Panel(B) and Right Leg Panel(C) using Bolts(), and
Washers() with Allen Key().
Do not fully tighten the Bolts.
Page 10/14Noble House Home Furnishings LLC
Step 4
Exert pressure floorwards, onto the Shelf with both your hands.
This pressure will help the Legs and Shelf reach full alignment
status.
Check for wobbles on a LEVEL surface.
If no wobbles are found proceed to tighten the Bolts in a
sequential manner, until evenly secured.
When tightening the Bolts tighten sequentially.
Do not tighten any Bolt fully and then move on towards the
nextone.
If there are still wobbles, loosen the Bolts and excute the same
above process.
Your Shelf is ready for use.
This Shelf can only be used on a flat, level surface.
Page 11/14Noble House Home Furnishings LLC
Shelf Restraint Device Installation Instructions:
WARNING
Serious or fatal crushing injuries can occur from tipping
furniture.
To help prevent tip-over: ALWAYS secure this furniture to the
wall using Shelf Restraint Device.
See product instructions for more ways to help prevent
furniture tip-over
Usage For Cabinet Restraint Device:
To Secure Shelf against wall, attach Metal Brackets() to
wall, and use Shelf Restraint Straps() to connect the
Metal Brackets() and the Shelf.
Instructions:
Page 12/14Noble House Home Furnishings LLC
6
Find the location of the screw holes on the wall.
You can mark these points in two ways as below:
1) Move the Shelf back to the wall. Mark two points the
same height as the Shelf on the wall.
Note: The Metal Brackets need to be secured to solid,
load bearing surface. Please use a Stud Finder(not
supplied) if needed to locate the Wall Frame.
2) Measure the height of the Metal Brackets() with
ruler/measuring tape and mark on wall to keep them
accurate and same height.
(Caution: The Shelf Restraint Strap() between the
product and Metal Backets() on the wall should be
Then attach L-shaped Metal Brackets() to wall using Self
Tapping Screws() with Screwdriver().
Page 13/14Noble House Home Furnishings LLC
5
7
Move the Shelf back against wall. Pull the Restraint
Straps() through the Metal Brackets() on the wall and
around the Top Frame(A), and pull the Restraint Straps()
tight.
The Shelf Restraint Device is installed and your Shelf
is ready for use.
Care & Maintenance
Page 14/14Noble House Home Furnishings LLC
Questions & Answers about Proposition 65
• What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant
exposures to chemicals that cause cancer, birth defects or other reproductive harm.
These chemicals can be in the products that Californians purchase, in their homes or
workplaces, or that are released into the environment. By requiring that this information be
provided, Proposition 65 enables Californians to make informed decisions about their
exposures to these chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant
amounts of listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause cancer,
birth defects or other reproductive harm. This list, which must be updated at least once a
year, has grown to include approximately 900 chemicals since it was first published in
1987.
• What types of chemicals are on the Proposition 65 list?
The list contains a wide range of naturally occurring and synthetic chemicals that include
additives or ingredients in pesticides, common household products, food, drugs, dyes, or
solvents. Listed chemicals may also be used in manufacturing and construction, or they
may be byproducts of chemical processes, such as motor vehicle exhaust.
• Where can I get more information on Proposition 65?
If you have specific questions on the administration or implementation of Proposition 65, you can
contact OEHHA's Proposition 65 program at [email protected], or by phone at (916)
445-6900.
• What does a warning mean?
If a warning is placed on a product label or posted or distributed at a workplace, a
business, or in rental housing, the business issuing the warning is aware or believes that it
is exposing individuals to one or more listed chemicals.
By law, a warning must be given for listed chemicals unless the exposure is low enough to
pose no significant risk of cancer or is significantly below levels observed to cause birth
defects or other reproductive harm.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Noble House 42955 Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Noble House 41764 Operating instructions
-
Noble House 305846 Operating instructions
-
Noble House 305725 Operating instructions
-
Noble House 9748 Operating instructions
-
Noble House 39721 Installation guide
-
Noble House 305066 Operating instructions
-
Noble House 55295 Operating instructions
-
Noble House 303453 Operating instructions
-
Noble House 42944 Installation guide
-
Noble House 39019 Operating instructions
