MAXPEEDINGRODS Q96 User manual

Brand: MAXPEEDINGRODS

Model: Q96

Type: User manual

Not connecting to device

Bluetooth®

Make sure the device is within range.

Device's Bluetooth connection needs to be turned ON.

Go to Setting > Connection > Power ON

Pair and Connect the device like new.

Phone Link will Not Start

Bad Lightning R/USB cable

Locked device

Not charged

Phone Link Frozen

Bad signal

Replace the cable.

Device needs to be unlocked.

Device needs to be powered ON for CarPlay/Android

Auto to function. Allow it to charge and power on.

Unplug the device, close all Apps and plug it inagain.

Connect back camera cable to enhance the signal,

We made two signal receive line with back camera.

GPS

Backup camera

GPS Area

Do not support original camera

Place GPS under the windowshield.

Find a after market camera to connect.

COMMON TROUBLESHOOTING GUIDE

No sound

lnternal amplifier is off

Product is muted

External amplifiers

Audio source

External amplifiers

Go to Settings > Audio > Internal Amp ON

Touch the volume.

Check the external amplifiers are on.

Check the remote output wire has voltage.

Change the audio source.

Connect 12V ACC wire to the power amplifier wire.

Radio area

Antenna

Poor radio reception

Change the station.

Antenna output wire is not connected.

Connect Antenna to product.

Media on USB flash drive

Media not supported Change the media format on the USB device.

Change the USB device.

Issues Cause Solution

CABLE CONNECTION

GPS cable

RCA cable

Power cable

USB cable

Backcamera cable

Wi-Fi & Bluttooth® enhance cable

DVR camera (Not included)

08 09

05 06

0108

07 03 04 05 06 1009

02 11

02 Power amplifier

01 DVR camera input

03 Rear camera input

04 USB1 charging

USB2 charging

FM/AM Antenna jack

Protocol interface

Cooling Fan

11 Wire harness connector

07 GPS

Video input (Not included in the package)

MAXPEEDINGRODS Q96 User manual

MAXPEEDINGRODS Q96 User manual

MAXPEEDINGRODS Q96 User manual

Related papers

Other documents