Microphones K1 are wireless and can be used with both Android and iOS devices. They have a range of 15 meters and a battery life of 2 hours. They also come with a charging cable and a user manual. The microphones are easy to use, just plug the USB receiver into your phone, turn on the microphone, and you're ready to go. They can be used for recording audio for videos, podcasts, or live streams.
Microphones K1 are wireless and can be used with both Android and iOS devices. They have a range of 15 meters and a battery life of 2 hours. They also come with a charging cable and a user manual. The microphones are easy to use, just plug the USB receiver into your phone, turn on the microphone, and you're ready to go. They can be used for recording audio for videos, podcasts, or live streams.
User 's manual
Quick Operation Guide
This device does not have a power adapter.
When charging is required, please use a power
adapter that has obtained the CCC certificate
and complies with relevant standards.
Please use this equipment within the
temperature range of 0 -40 , and store the
equipment and accessories within the
temperature range of -20 - +45 . When the
ambient temperature is too high or too low, it
may cause equipment failure.
1 Power-on but disconnected state: the red light
and blue light on the front flash alternately
2 Power-on and connected state: the blue light
on the front is always on
4 Charging status: the front red light is always
on; the front red light is off when fully charged
1 First, insert the USB plug of the receiver into
the corresponding USB port of the mobile phone,
and the blue light of the receiver indicator flashes
at this time.
2 Press and hold the power switch on the
transmitter for 3 seconds, the microphone is
turned on, and the blue light on the front is on at
the same time, it means that the power is turned
on and the connection is successful.
3 At the same time, the blue light on the
receiver is steady on, indicating that the
connection is successfully paired, and the phone
can use the microphone to receive the sound by
turning on the camera, voice recorder, and live
video APP.
1 When the red light on the front of the
microphone transmitter flickers, it is a low-power
prompt for the device.
2 When the device is in use, when the battery of
the mobile phone is low and needs to be charged,
the mobile phone can be charged through the
USB interface of the receiver.Use the USB cable
of the mobile phone charger to directly plug into
the USB port of the receiver to charge the mobile
phone
When charging, the front red light on the
microphone transmitter will be on, and the front
red light will go out when it is fully charged.
1 Power-on but disconnected state: blue light
flashes
2 Power on and connected state: blue light is on.
3 Low battery: red light flashes on the front
Do not expose the device to high temperatures
or around heating devices, such as sunlight,
heaters, microwave ovens, ovens or water
heaters, etc.
Wireless microphone transmitter
Wireless microphone receiver
User manual (including warranty card)
USB Charging cable............................
When charging is complete or not charging,
please disconnect the charger from the device
and unplug the charger from the power socket.
The device is equipped with a non-removable
built-in battery, please do not replace the battery
yourself to avoid damage to the device
Please dispose of this equipment, batteries and
related accessories in accordance with local
regulations, and do not dispose of them as
domestic waste
Warning:The battery (battery pack or battery
pack) must not be exposed to such as
sunlight, fire or similar overheating
environment
Notice:If the battery is improperly replaced,
there is a danger of explosion. Only the same
type or equivalent type of battery can be used
to replace it.
Note: In order to ensure the effective use of
the connection, there should be no obstacles
between the microphone and the receiver.
When wearing the microphone for recording
or live video broadcasting, it is recommended
to face the receiver, otherwise the signal may
be interrupted.
Safety information
Safety information
Receiver
Instructions
Charging
Technical specifications
Outline picture (Note: The outline
picture is subject to the actual product!)
Indicator light description
Microphone transmitter
1
1
2
3
4
5
6
7
8
2
3
45
7
8
6Function Description
Windbreak
Microphone clip
Power
Power
USB Charging port
Receiver indicator
USB plug
Mobile phone charging port
Microphone indicator
Microphone indicator
Dimensions
USB
Transmitter 57×15×23MM With back clip
Receiver 44×26×7.5MM With USB plug
TYPE C or Lightning Selectable
Power input DC5V 500mA
Phone
system
Bluetooth
receiving
distance
Android 6.0 or above (Type c interface)
or IOS 9.0 or above
Effective distance 15 meters
(no obstacles in the middle)
Operating
temperature -5 to 40C°
Weight 20g
Battery 3.7V/65MAH Lithium Ion Battery
Bluetooth Buletooth4.0
Charging
time 2 Hours
V1 1 2 3
5 6 7 8
4
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
-
1
-
2
Microphones K1 are wireless and can be used with both Android and iOS devices. They have a range of 15 meters and a battery life of 2 hours. They also come with a charging cable and a user manual. The microphones are easy to use, just plug the USB receiver into your phone, turn on the microphone, and you're ready to go. They can be used for recording audio for videos, podcasts, or live streams.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
Srhythm K61 Portable Mini Wireless Lavaliere Lapel Microphone User manual
-
Retekess TR617&TR617B User manual
-
Takstar v4 User manual
-
DEITY MICROPHONES SW24521 Pocket Wireless Mobile Kit User manual
-
Behringer BT251-BK User manual
-
blucoil Xvive U2 Wireless Guitar System User manual
-
Furrion FBS012N-SB Quick Start Manual & User Manual
-
Xvive Audio U3 User manual
-
blucoil Xvive U3 2.4 GHz Digital Microphone Wireless System Bundle User manual
-
Redragon H828 Operating instructions
