Smart Watches T13 User guide

Brand: Smart Watches

Model: T13

Type: User guide

Smart Watches T13 offer a range of features to enhance your daily life. Stay connected with Bluetooth calls, messages, and notifications from social media apps right on your wrist. Monitor your health with heart rate, blood pressure, and sleep tracking. Stay active with multiple sports modes and track your progress. Enjoy music with Bluetooth earbuds and control your phone's camera remotely. Customize your watch face and use it for convenient features like alarms, weather updates, and finding your phone. With its long-lasting battery, the T13 is your perfect companion for all-day use.

Swipe down on the main dial interface to

enter, including "audio Bluetooth switch,

brightness adjustment, menu style

selection, QR code package, about, setting

interface".

Basic parameters:

Connection method: Bluetooth connection

Input: 5V/100mA Battery:DC 3.7V 240mAh 0.88Wh

Device Requirements: Android 5.0 or iOS 10.0 and above

Precautions:

1. It is forbidden to use an adapter with a charging voltage

greater than 5V and a charging current greater than 2A,

and the charging time is 2-3 hours.

2. It is forbidden to charge with water stains.

3. Do not disassemble the casing of this product without

authorization, the product will be damaged and the

warranty will be lost.

Special note:

1. This product is not a medical device, the measurement

results are for reference only, not as anyMedical Use and

Rationale. Please follow the doctor's instructions, do not

rely on this test resultSelf-diagnosis and treatment.

2. This manual is produced based on the existing

information, in line with continuous improvement and

continuous developmentThe company reserves the

product specification and function changes, and the

description of this manualthe right to make modifications

and improvements to any product described.

Add components

Swipe right to the last interface, click

the plus sign and select the function

icon to add it to the interface.

Device requirements: ios 10.0 and above; Android 5.0

and above; support Bluetooth 5.0.

FCC Warning

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions:(1) This device may

not cause harmful interference, and (2) this device must

accept any interference received, including interference that

may cause undesired operation.

Any Changes or modifications not expressly approved by the

party responsible for compliance could void the user's

authority to operate the equipment.

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15 of

the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates uses and

can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the

user is encouraged to tr y to correct the interference by one

or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.The device has been evaluated to meet

general RF exposure requirement. The device can be used in

portable exposure condition without restriction.

Smart Watches T13 User guide

Smart Watches T13 User guide

Smart Watches T13 User guide

Related papers

Other documents