Analog Way NeXtage 08 is a powerful true-seamless AV processor that offers top-notch presentations and unleashes creativity for a new experience in show and event management. With 8x 3G/HD/SD-SDI, 8x Universal Analog, 2x DisplayPort, and 4x HDMI inputs, it can handle a variety of signal formats. The NeXtage 08 also features 2x Universal Analog, 2x DVI-I, and 2x 3G/HD/SD-SDI outputs, providing flexible connectivity options. The intuitive Web RCS interface allows for easy control and configuration, while the included presets and effects enable users to create stunning visuals.
Analog Way NeXtage 08 is a powerful true-seamless AV processor that offers top-notch presentations and unleashes creativity for a new experience in show and event management. With 8x 3G/HD/SD-SDI, 8x Universal Analog, 2x DisplayPort, and 4x HDMI inputs, it can handle a variety of signal formats. The NeXtage 08 also features 2x Universal Analog, 2x DVI-I, and 2x 3G/HD/SD-SDI outputs, providing flexible connectivity options. The intuitive Web RCS interface allows for easy control and configuration, while the included presets and effects enable users to create stunning visuals.
NeXtage 08 - 4K - Ref. NXT0802-4K
QUICK START GUIDE
Thank you for choosing Analog Way and the NeXtage 08 - 4K. By following these simple steps, you will be
able to set up and use your Powerful true-seamless AV processor based on Analog Way’s new LiveCore™
plaorm within minutes. Discover the NeXtage 08 - 4K capabilies and intuive interface while commanding
top-notch presentaons and unleash your creavity for a new experience in show and event management.
• 1 x NeXtage 08 - 4K (NXT0802-4K)
• 1 x Power supply cord
• 1 x Ethernet cross cable (for device control)
• 1 x MCO 10 pin connector
• 1 x Web-based Remote Control Soware included and hosted on the device
• 1 x Rack mount kit (the parts are stowed in the packaging foam)
• 1 x User manual (PDF version)*
• 1 x Quick start guide*
* User manual and quick start guide are also available on www.analogway.com
- Download on www.analogway.com
to use the Web RCS.
The NeXtage 08 - 4K uses standard ethernet LAN
networking. To connect the Web RCS to your
new NeXtage 08 - 4K, you rst need to connect a
computer to the NeXtage 08 - 4K using the Ethernet
cable.
Open and enter the IP address of
the NeXtage 08 - 4K displaying on the front panel
screen.
The connecon should start.
Oen, computers are set to DHCP client (automac
IP detecon) mode. You may need to change the
IP address conguraon on your computer before
you can connect. These sengs are found in the
properes for your LAN network adaptor, and vary
by operang system.
The default IP address on the NeXtage 08 - 4K is
192.168.2.140 with a netmask of 255.255.255.0
Therefore, you can assign your computer a stac
IP address of 192.168.2.100 and a netmask of
255.255.255.0 and should be able to connect.
If the connecon is not starng, please see:
• Be sure the computer IP address is on the same
network and subnet as the NeXtage 08 - 4K.
• Be sure that no two devices have the same IP
address (prevent IP conicts)
• Check your network cable. You will need a crossover
ethernet cable if you are connecng directly from
the NeXtage 08 - 4K to the computer. If a hub or
switch is involved, use straight ethernet cables.
• For more informaon, please see the user manual
or contact your local technical support.
Once you have successfully connected, the ash
app will automacally download and launch in AW
. When the two icons in the boom right
corner of the screen turn green, the Web RCS is
ready to use. If you are having trouble syncronizing,
try clearing the cache and refreshing the page
(ctrl+F5 in most browsers):
- NXT0802-4K: will turn green when connected
- will turn green when the Web RCS has
nished syncronizing.
Mounng using only the front
rack ears is sucient for xed
installaons. Addional support,
such as the rear rack support or
slide rails, is required for mobile
applicaons, and recommended
for all.
hp://bit.ly/AW-Register
Contextual
buons
Menu scroll
knob
#1 to #8: access Frame #1 to #4
or Logo #5 to #8
Color: ll in a layer with a color
- 4 x HDMI
- 6 x DVI-I
(Dual link available on Inputs 2 and 6)
- 2 x DisplayPort
(Dual link available on Inputs 4 and 8)
- 8 x 3G/HD/SD-SDI
- 8 x Universal Analog
(4 x HD15 & 4 x DVI-A)
- 2 x Universal Analog (HD15 & DVI-A)
- 2 x DVI-I (DVI Dual-Link on output #1)
- 2 x Video Opcal SFP module cage
- 3G/HD/SD-SDI
not
scaled layer.
A/B: scaled layers
edit Program
edit Preview
Recall the last preset into
your Preview monitor
4.3’’ TFT color display
Push the buon then
use the contextual buon to
enter in stand-by mode
USB Plug
Ethernet
Plug
Tally
Analog Frame
Lock plug and
specic loop
output
Control:
Home menu
or back one level
Enter: validate the menu
or command
Swappable power unit;
100-240 VAC; 4,8A; 50/60Hz;
225W
Used for Secure Power
Unit (Ref. SPU001) status
management only
4 x USB Plugs
Used for eect sync in
mul-machine mode.
See User’s Manual for details
load a preset
save a preset
TAKE:
Transion the pre-
selected sources onto the
Program output with the
selected eects
- 1 x Universal Analog (HD15 & DVI-A)
- 1 x DVI-I
- 2 x SD/HD/3G SDI
- 1 x RGBs/RGsB/RGB/YPrBr/YC/comp
Analog output
Clear: clear a layer
adjust
Layer properes
Source control:
press before selecng the
Logo/Frame number
freeze the input linked to the
current layer on the Program
Screen:
#1 to #2: select a screen
The user should avoid disconnecng the power source
(AC input) unl the unit is in stand-by mode. Failure to
do this could result in hard drive data corrupon.
EDIT
Setup assistant for adjusng all basic setups.
Manage your outputs and have access to every set-
ngs and parameters.
Congure your inputs connected to your NeXtage 08 -
4K.
Congure Logos and Frames selecons.
Load your Logos and Frames into the system.
Congure your preset by loading layouts.
Congure the Condence monitor.
Congure the operator’s monitor including the re-
soluon and choice of layout, to show input or output preview
combinaons.
Congure the blending.
Control: Access all control sengs.
Check the version number, board checksum...
Access to all Analog Way maintenance services
(update, ...).
Once your setup is complete, click on the EDIT tab to start building
your presets.
• Resize or reposion your layer by clicking and dragging the layer.
• Load and place all your layer with your mouse and use the take
buon to send it to your program
• Drag sources into layers to change the source
Other sengs are available for layers, please refer to the user
manual.
Choose your operaon mode using the setup menu (SETUP >
to drag and drop your unused output to
the selected mode.
Under , click on the selected output on the le
to have access to the setup. Then choose the format and rate.
(Rate choice is only available for Monitoring/Preview output, the
main outputs will use the rate dened under
)
Under this menu you have access to the feature,
Opcal SFP restart and test paern possibilies.
TIP: Always try to use nave resoluon of your screens/
projectors to avoid addional scaling.
Click on to have an overview of your
inputs.
Click on to launch the automac detecon of all
inputs.
Click on the le on the individual input setup in order to dene
your input
As each input has mulple input plugs, you must choose one
plug to display as this input. The remaining non-displayed plugs
remain acve and can sll be congured.
Click on your in order to choose the displayed
input.
Click on the to start sengs a specic plug without
choosing it as the acve displayed plug. (Not necessarily
displayed).
INPUT SETUP
#1 = Source is on the Program output
#2 = Freeze enable
#3 = Stand-by buon
#4 = Preset Selecon
#1 = Source is on Preview
#2 = Funcon available for modicaon
Contextual buon
Layer/source selected or is currently acve
on the Program output
Layer/source selected or is not currently
acve on the Program output
Once you build a preset, you can save it as one of the 144 preset
slots the NeXtage 08 - 4K oers.
• Click on then choose your preset number.
• You can load your preset at any me on Program or Preview
by clicking on the preset number (with the buon
disabled), or simply drag and drop the preset into the Program
or Preview windows.
• To reset a preset, please click on the preset number holding
on your keyboard. Then into the windows below click on
the reset buon
For complete details and operaons procedures, please refer to the User’s Manual and our
website for further informaon:
15-SEP-2020
NXT0802-4K-QSG
Code: 140174
This Analog Way product has a 3 year warranty on parts and labor, back to factory. This warranty does not
include faults resulng from user negligence, special modicaons, electrical surges, abuse (drop/crush),
and/or other unusual damage. In the unlikely event of a malfuncon, please contact your local Analog Way
oce for service.
SETUP
EDIT
WEB RCS STRUCTURE
Click on SETUP, then go to the precong
buon. The Setup assistant is here to help
you to set up step by step your unit by
following an interacve tutorial.
The EDIT mode is the place where you will
manage all your conguraons. You will
manage your inputs, your layers in terms
of size posion eect etc… your Frames
and Logos. You can save all your screen
conguraons into presets
The mode is the secon where you
will start operang your show. You can play
preset one aer the other on a real meline
adding some parameters like duraon or
wait for user interacon.
-
1
-
2
-
3
-
4
Analog Way NeXtage 08 is a powerful true-seamless AV processor that offers top-notch presentations and unleashes creativity for a new experience in show and event management. With 8x 3G/HD/SD-SDI, 8x Universal Analog, 2x DisplayPort, and 4x HDMI inputs, it can handle a variety of signal formats. The NeXtage 08 also features 2x Universal Analog, 2x DVI-I, and 2x 3G/HD/SD-SDI outputs, providing flexible connectivity options. The intuitive Web RCS interface allows for easy control and configuration, while the included presets and effects enable users to create stunning visuals.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Analog way NeXtage 16 Quick start guide
-
Analog way ASC4806-4K-PL User manual
-
-
-
-
-
Analog way Vertige Quick start guide
-
-
-