ATEN 2X-019G Quick start guide

Side Panel Double Mount Kit

Step 1: Hold the two PDUs side by side so that the

bottom is flush and align the brackets with the holes

on each PDU.

Installation:

Bracket Mount

Rack Mount

Follow the instructions below to secure two PDUs

together and mount them to a rack.

Step 2: Screw the brackets to the PDUs to secure

them together at each end, and then install two

buttons at each end of the PDUs, as show above.

2 x Brackets

4 x Buttons

4 x Phillips Screws

12 x Hexagon Screws

Step 1: Align the 4 buttons with 4 slots on the rack,

insert and let the PDUs slide down and secure into

place on the rack.