Kohler 15160-X-CP Specification

Category
Faucets
Type
Specification
Features
Metal construction
One-piece, self-contained ceramic disc valve allows
both volume and temperature control
Temperature memory allows faucet to be turned on
and off at any temperature setting
High-temperature limit setting for added safety
Touch control for stream-to-spray water flow
Integral vacuum breaker
Meets CALGreen requirements for kitchen faucets
For single-hole or three-hole installation when
included 10 (254 mm) escutcheon plate is used
9 (229 mm) spout reach with rotating spout
1.8 gpm (6.8 lpm) maximum flow rate at 60 psi (4.1
bar)
Codes/Standards Applicable
Specified model meets or exceeds the following at date of
manufacture:
ADA
ICC/ANSI A117.1
CSA B651
OBC
ASME A112.18.1/CSA B125.1
NSF 61
Energy Policy Act of 2005
All applicable US Federal and State material
regulations
PULL-OUT SPRAY KITCHEN SINK
FAUCET
K-15160
ALSO K-R15160
OBC
ADA CSA B651
Colors/Finishes
CP: Polished Chrome
Other: Refer to Price Book for additional colors/finishes
Accessories
NA: None applicable
Specified Model
Model Description Lever Handle Loop Handle
K-15160 Kitchen faucet matching color sprayhead CP Other
K-15160-AP Kitchen faucet polished chrome body and white sprayhead CP
K-15160-L Kitchen faucet matching color sprayhead CP Other
K-15160-LA Kitchen faucet polished chrome body and white sprayhead CP
K-R15160 Kitchen faucet matching color sprayhead CP
Product Specification
The pull-out spray kitchen sink faucet shall be of metal construction. Product shall feature a maximum flow rate of 1.8 gpm (6.8
lpm) at 60 psi (4.1 bar). Product shall feature a one-piece, self-contained ceramic disc valve, which allows both volume and
temperature control. Product shall feature temperature memory, allowing the faucet to be turned on and off at any temperature
setting. Product shall feature a high-temperature limit stop for added safety, 9 (229 mm) spout reach with rotating spout,
integral vacuum breaker, and touch control for stream-to-spray water flow. Product shall be for single-hole or three-hole
installation when included 10 (254 mm) escutcheon plate is used. Product shall meet CalGreen requirements for kitchen
faucets. Faucet shall be Kohler Model K-15160-____-____ or K-R15160-CP.
CORALAIS
®
Page 1 of 2
1003666-4-
F
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Optional Accessories
1012715 Deep roughing-in kit requires 1-7/16 (37 mm) to 1-1/2 (38 mm) diameter hole to
accommodate 1-1/2 (38 mm) to 3-3/8 (86 mm) thick installations
NA
1055715 Low flow kit reduces maximum flow to 1.5 gpm (5.7 lpm) at 60 psi (4.1 bar) NA
1160594 Large Spray 0.35 gpm (1.32 lpm) Insert only NA
Installation Notes
Install this product according to the installation guide.
ADA, ICC/ANSI A117.1, CSA B651, OBC compliant when
installed to the specific requirements of these regulations.
This product meets all local plumbing codes for vacuum
breaker requirements.
All necessary parts included for both single-hole and
three-hole installation.
9"
(229 mm)
1-3/8"
(35 mm)
Max
10-1/2" (267 mm)
5-3/4"
(146 mm)
6-3/8"
(162 mm)
Lever Loop
4"
(102 mm)
4"
(102 mm)
17"
(432 mm)
Spray
Hose
Spray
Hose
Weight
Supply Hoses With
3/8" Compression Fitting
8-3/8"
(213 mm)
6"
(152 mm)
2-1/2"
(64 mm)
Valve Outlet Hose
14" (356 mm) Long
Lever 11"
(279 mm)
Loop 11-5/8"
(295 mm) Max Open
Ø 1-5/16"
(33 mm)
Ø 2-1/4" (57 mm)
Product Diagram
CORALAIS
®
CORALAIS
®
PULL-OUT SPRAY KITCHEN SINK FAUCET
Page2of2
1003666-4-
F
  • Page 1 1
  • Page 2 2

Kohler 15160-X-CP Specification

Category
Faucets
Type
Specification

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI