Newport Brass 1500-5103/15S Installation guide

Brand
Newport Brass
Model
1500-5103/15S
Category
Faucets
Type
Installation guide

This manual is also suitable for

Newport Brass 1500-5103/15S is a linear pull-down kitchen faucet that can be installed by a professional plumbing contractor. It features a 1.350-inch diameter mounting hole, and comes with an O-ring, mounting kit, and hoses. The faucet has a 3/8-inch compression outlet and a 9/16-24 UNEF connection for a 3/8-inch compression outlet. It also includes a weight to provide proper pull to the hose, and a clip to connect the hose to the outlet. The faucet can be used to flush debris from lines by aiming the hose into the sink and turning on the faucet to the center (mixed) position for one minute.

Newport Brass 1500-5103/15S is a linear pull-down kitchen faucet that can be installed by a professional plumbing contractor. It features a 1.350-inch diameter mounting hole, and comes with an O-ring, mounting kit, and hoses. The faucet has a 3/8-inch compression outlet and a 9/16-24 UNEF connection for a 3/8-inch compression outlet. It also includes a weight to provide proper pull to the hose, and a clip to connect the hose to the outlet. The faucet can be used to flush debris from lines by aiming the hose into the sink and turning on the faucet to the center (mixed) position for one minute.

INSTALLATION INSTRUCTIONS
EAST LINEAR PULL-DOWN
KITCHEN FAUCET
Model No's: 1500-5103,
1500-5203
Congratulations on the purchase
of your Newport Brass product,
an excellent choice, that will give you
years of quality service and enhance
the look and style of your home.
1500-5103
1500-5203
NWP-1500-5103
Figure 1
Figure 1a
1
3
2
1
Mounting
surface
hole
Recommended Installation by a Professional Plumbing Contractor
Note: The use of petroleum base plumbers putty on our products will nullify the warranty. We recom
mend the use of clear silicone sealing materials.
If mounting faucet to stainless steel rim, an under-mount support, (e.g. wood, appropriate size x 1/2”
thick), should be utilized.
1. Drill hole in mounting surface. Recommended deck hole Ø1.350”not to exceed Ø1.562”.
2. Place O-ring (2) on underside of BODY (1). See Figure 1a.
3. Insert Hoses through hole in mounting surface.
Secure into place with MOUNTING KIT (3). See
Figure 1.
4. Attach hot/cold spout supply directly to valves in
the wall. See Fig. 2
5. DO NOT
remove the HOSE (6) from SPOUT (4).
See Figure 3.
6. Attach WEIGHT (9) to HOSE (6) in the appropri-
ate area shown,on the upward swing toward the
SPRAYHEAD (5), in order to provide proper pull to
hose. See Figure 4.
7. Connect HOSE (6) to valve outlet (8).
See Figure 4. Attach CLIP (7) to the connection
between HOSE (6) and OUTLET (8).
See Figure 4a.
REV C
Figure 2
Wall valves
(not included)
9/16-24 UNEF
(FOR 3/8” COMPRESSION
OUTLET )
3/8” COMPRESSION
OUTLET
Figure 3
6
4
DO NOT REMOVE
ZIP TIE
4
See Detail A
Detail A
Figure 4
7
8
8
6
9
5
Figure 4a
6
5
2001 CARNEGIE AVE, SANTA ANA CA 92705
(949) 417-5207
WWW.NEWPORTBRASS.COM
NWP-1500-5103
EN-3034L
REV C
Figure 4 - Spare Parts
8. With faucet in the OFF position, open water supply valves. Inspect connections under sink for leaks. DO
NOT turn faucet on yet.
9. Pull SPRAYHEAD (5) out from SPOUT (4). While holding HOSE (6), unscrew
SPRAYHEAD (5). Aiming HOSE (6) into sink, turn on faucet to center position
(mixed) and flush for one minute to remove debris from lines.
10. Turn OFF faucet and reattach SPRAYHEAD (5) to HOSE (6). See Figure 5.
11. Check the SPRAYHEAD (5) by operating the trigger from aerator to spray.
4
6
5
Figure 5
09/11/17
ORDER 12494
FOR 1500-5203
  • Page 1 1
  • Page 2 2
  • Page 3 3

Newport Brass 1500-5103/15S Installation guide

Brand
Newport Brass
Model
1500-5103/15S
Category
Faucets
Type
Installation guide
This manual is also suitable for

Newport Brass 1500-5103/15S is a linear pull-down kitchen faucet that can be installed by a professional plumbing contractor. It features a 1.350-inch diameter mounting hole, and comes with an O-ring, mounting kit, and hoses. The faucet has a 3/8-inch compression outlet and a 9/16-24 UNEF connection for a 3/8-inch compression outlet. It also includes a weight to provide proper pull to the hose, and a clip to connect the hose to the outlet. The faucet can be used to flush debris from lines by aiming the hose into the sink and turning on the faucet to the center (mixed) position for one minute.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents