Kohler 15160-CP Specification

15160-CP
Kohler
Brand
Kohler
Model
15160-CP
Category
Faucets
Type
Specification
Features
•
Metal construction
•
One-piece, self-contained ceramic disc valve allows
both volume and temperature control
•
Temperature memory allows faucet to be turned on
and off at any temperature setting
•
High-temperature limit setting for added safety
•
Touch control for stream-to-spray water flow
•
Integral vacuum breaker
•
Meets CALGreen requirements for kitchen faucets
•
For single-hole or three-hole installation when
included 10″ (254 mm) escutcheon plate is used
•
9″ (229 mm) spout reach with rotating spout
•
1.8 gpm (6.8 lpm) maximum flow rate at 60 psi (4.1
bar)
Codes/Standards Applicable
Specified model meets or exceeds the following at date of
manufacture:
•
ADA
•
ICC/ANSI A117.1
•
CSA B651
•
OBC
•
ASME A112.18.1/CSA B125.1
•
NSF 61
•
Energy Policy Act of 2005
•
All applicable US Federal and State material
regulations
PULL-OUT SPRAY KITCHEN SINK
FAUCET
K-15160
ALSO K-R15160
OBC
ADA CSA B651
Colors/Finishes
•
CP: Polished Chrome
•
Other: Refer to Price Book for additional colors/finishes
Accessories
•
NA: None applicable
Specified Model
Model Description Lever Handle Loop Handle
K-15160 Kitchen faucet – matching color sprayhead ❑ CP ❑ Other
K-15160-AP Kitchen faucet – polished chrome body and white sprayhead ❑ CP
K-15160-L Kitchen faucet – matching color sprayhead ❑ CP ❑ Other
K-15160-LA Kitchen faucet – polished chrome body and white sprayhead ❑ CP
K-R15160 Kitchen faucet – matching color sprayhead ❑ CP
Product Specification
The pull-out spray kitchen sink faucet shall be of metal construction. Product shall feature a maximum flow rate of 1.8 gpm (6.8
lpm) at 60 psi (4.1 bar). Product shall feature a one-piece, self-contained ceramic disc valve, which allows both volume and
temperature control. Product shall feature temperature memory, allowing the faucet to be turned on and off at any temperature
setting. Product shall feature a high-temperature limit stop for added safety, 9″ (229 mm) spout reach with rotating spout,
integral vacuum breaker, and touch control for stream-to-spray water flow. Product shall be for single-hole or three-hole
installation when included 10″ (254 mm) escutcheon plate is used. Product shall meet CalGreen requirements for kitchen
faucets. Faucet shall be Kohler Model K-15160-____-____ or K-R15160-CP.
CORALAIS
®
Page 1 of 2
1003666-4-
F
USA/Canada: 1-800-4KOHLER
(1-800-456-4537)
www.kohler.com
Optional Accessories
1012715 Deep roughing-in kit – requires 1-7/16″ (37 mm) to 1-1/2″ (38 mm) diameter hole to
accommodate 1-1/2″ (38 mm) to 3-3/8″ (86 mm) thick installations
❑ NA
1055715 Low flow kit – reduces maximum flow to 1.5 gpm (5.7 lpm) at 60 psi (4.1 bar) ❑ NA
1160594 Large Spray 0.35 gpm (1.32 lpm) – Insert only ❑ NA
Installation Notes
Install this product according to the installation guide.
ADA, ICC/ANSI A117.1, CSA B651, OBC compliant when
installed to the specific requirements of these regulations.
This product meets all local plumbing codes for vacuum
breaker requirements.
All necessary parts included for both single-hole and
three-hole installation.
9"
(229 mm)
1-3/8"
(35 mm)
Max
10-1/2" (267 mm)
5-3/4"
(146 mm)
6-3/8"
(162 mm)
Lever Loop
4"
(102 mm)
4"
(102 mm)
17"
(432 mm)
Spray
Hose
Spray
Hose
Weight
Supply Hoses With
3/8" Compression Fitting
8-3/8"
(213 mm)
6"
(152 mm)
2-1/2"
(64 mm)
Valve Outlet Hose
14" (356 mm) Long
Lever 11"
(279 mm)
Loop 11-5/8"
(295 mm) Max Open
Ø 1-5/16"
(33 mm)
Ø 2-1/4" (57 mm)
Product Diagram
CORALAIS
®
CORALAIS
®
PULL-OUT SPRAY KITCHEN SINK FAUCET
Page2of2
1003666-4-
F
  • Page 1 1
  • Page 2 2

Kohler 15160-CP Specification

15160-CP
Kohler
Brand
Kohler
Model
15160-CP
Category
Faucets
Type
Specification
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents