2. Baxton Studio
  3. BBT5491-Maya-Cream-DC

Baxton Studio BBT5491-Maya-Cream-DC, BBT5491-Maya-Grey-DC Assembly Instructions

  • Hello! I've reviewed the assembly instructions for the BBT5491-DC chair. This document provides a detailed guide for assembling the chair, including a parts list, hardware details, and step-by-step procedures. It also emphasizes caution against over-tightening bolts during assembly. I'm here to help answer any questions you might have about the process.
  • What tool is needed for assembly?
    Should I fully tighten the nuts immediately?
    What should I do to prevent damage to the thread?
HARDWARE LIST (BOX : 1)
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 80mm 8 PCS
2 JCBC BOLT M6 x 35mm 1 PC
3 M6 FLAT WASHER 9 PCS
4 M6 SPRING WASHER 9 PCS
5 WOOD SCREW M4 x 30mm 4 PCS
6 M4 ALLEN KEY (BALL SHAPE) 1 PC
ASSEMBLY INSTRUCTIONS
PART LIST
ITEM DESCRIPTION BOX QTY
A BACK 11 PC
B SEAT FRAME 1 1 PC
C LEG FRONT 1 2 PCS
D CUHSION 1 1 PC
STEP 1 STEP 2
1 OF 3
MODEL : BBT5491 - DC
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete before assembly. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTION : 1. Do not FULLY - TIGHTEN the nuts or nuts bolts until they are ready for assembly.
2. Do not OVER - TIGHTEN the nuts or bolts to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tools needed : Screwdriver (not provided).
STEP 2.1
STEP 2.2
A
B
A
B
2
4
3
6
143
6
Don't screw tight
Don't screw tight
ASSEMBLY INSTRUCTIONS 2 OF 3
STEP 3 STEP 4
STEP 5 STEP 6
Place the chair on the flat surface
and adjust the alignment and balance
of the legs then , Please screw tight
the steps 2 , 4 bolts.
B
C
143
6
C
Don't screw tight
D
B
ASSEMBLY INSTRUCTIONS 3 OF 3
STEP 7 STEP 8
D
5
/