Baxton Studio BBT8051-Dark Brown/Walnut-4PC Dining Nook Set Assembly Instructions

Brand
Baxton Studio
Model
BBT8051-Dark Brown/Walnut-4PC Dining Nook Set
Type
Assembly Instructions

Baxton Studio BBT8051-Dark Brown/Walnut-4PC Dining Nook Set is an assembly furniture set, that includes a table top, four legs, two cushions, leg supports, and a variety of hardware including bolts, washers, a screwdriver, wood, screws, an Allen key, and wood dowels. The maximum assembly time is estimated to be 1 hour and 59 minutes. The document provides certain cautions, including a direction not to fully tighten bolts until all bolts and nuts are assembled. It also provides warnings about damage to the thread if bolts are overtightened.

Baxton Studio BBT8051-Dark Brown/Walnut-4PC Dining Nook Set is an assembly furniture set, that includes a table top, four legs, two cushions, leg supports, and a variety of hardware including bolts, washers, a screwdriver, wood, screws, an Allen key, and wood dowels. The maximum assembly time is estimated to be 1 hour and 59 minutes. The document provides certain cautions, including a direction not to fully tighten bolts until all bolts and nuts are assembled. It also provides warnings about damage to the thread if bolts are overtightened.

PART LIST
ITEM DESCRIPTION QTY
A TABLE TOP 1 PC
B LEGS 4 PCS
ASSEMBLY INSTRUCTIONS PART LIST
ITEM DESCRIPTION QTY
1 JCBC BOLT M6 x 60mm 8 PCS
2 M6 FLAT WASHER 8 PCS
3 M6 SPRING WASHER 8 PCS
4 M4 ALLEN KEY 1 PC
STEP 1
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
STEP 2
A
B
2
3
1
4
ASSEMBLY INSTRUCTIONS HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 50mm 4pcs
2 JCBC Bolt M8 x 45mm 6pcs
3 M8 FLAT WASHER 6pcs
4 M6 SPRING WASHER 4pcs
5 M8 SPRING WASHER 6pcs
6 WOOD SCREW M4 x 38 10PCS
7 M4 ALLEN KEY (BALL SHAPE) 1PC
8 M5 ALLEN KEY (BALL SHAPE) 1PC
9 WOOD DOWEL M8 x 30mm 8PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
PART LIST
ITEM DESCRIPTION QTY
A CUSHION BACK 1 PC
B CUSHION SEAT 1 PC
C LEG SUPPORT FRONT 1 PC
D LEG SUPPORT BACK 1 PC
E LEG LEFT 1 PC
F LEG RIGHT 1 PC
STEP 1 STEP 2
1 OF 3
417
CE
1.1 Open the zip at the bottom of cushion seat and take out all part hardware.
DL
R
F
9
C
D
FRONT
BACK
ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 3
8
2
5
3
6
A
B
A
B
L
RD
CE
F
L
R
4.1 Follow marking line assemble leg.
ASSEMBLY INSTRUCTIONS
STEP 5
3 OF 3
ASSEMBLY INSTRUCTIONS
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 50mm 4pcs
2 JCBC Bolt M8 x 45mm 8pcs
3 M8 FLAT WASHER 8pcs
4 M6 SPRING WASHER 4pcs
5 M8 SPRING WASHER 8pcs
6 WOOD SCREW M4 x 38 10PCS
7 M4 ALLEN KEY (BALL SHAPE) 1PC
8 M5 ALLEN KEY (BALL SHAPE) 1PC
9 WOOD DOWEL M8 x 30mm 8PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
STEP 1 STEP 2
1 OF 3
417
CE
PART LIST
ITEM DESCRIPTION QTY
A CUSHION BACK 1 PC
B CUSHION SEAT 1 PC
C LEG SUPPORT FRONT 1 PC
D LEG SUPPORT BACK 1 PC
E LEG LEFT 1 PC
F LEG RIGHT 1 PC
D
FL
R
9
C
D
FRONT
BACK
1.1 Open the zip at the bottom of cushion seat and take out all part hardware.
ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 3
8
2
5
3
A
B
A
B28
5
3
Don't screw tied **Finish step 4,
Please screw tied the step 3 bolt.
E
E
ASSEMBLY INSTRUCTIONS
STEP 5
3 OF 3
6
STEP 6
L
L
R
R
C
D
E
F
5.1 Follow marking line assemble leg.
ASSEMBLY INSTRUCTIONS HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 50mm 4pcs
2 M6 SPRING WASHER 4pcs
3 WOOD SCREW M4 x 38 8PCS
4 M4 ALLEN KEY (BALL SHAPE) 1PC
5 WOOD DOWEL M8 x 30mm 8PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
PART LIST
ITEM DESCRIPTION QTY
A CUSHION SEAT 1 PC
B LEG SUPPORT 2 PCS
C LEG 2 PCS
STEP 1 STEP 2
1 OF 2
214
5
B
BC
1.1 Open the zip at the bottom of cushion seat and take out all part hardware.
B
ASSEMBLY INSTRUCTIONS
STEP 3 STEP 4
2 OF 2
3
3.1 Follow marking line assemble leg.
ASSEMBLY INSTRUCTIONS
HARDWARE LIST
ITEM DESCRIPTION QTY
1 JCBC Bolt M6 x 50mm 4pcs
2 JCBC Bolt M8 x 45mm 8pcs
3 M8 FLAT WASHER 8pcs
4 M6 SPRING WASHER 4pcs
5 M8 SPRING WASHER 8pcs
6 WOOD SCREW M4 x 38 10PCS
7 M4 ALLEN KEY (BALL SHAPE) 1PC
8 M5 ALLEN KEY (BALL SHAPE) 1PC
9 WOOD DOWEL M8 x 30mm 8PCS
Read this instruction carefully. See hardware and furniture part list for guidance.
Be sure all parts are complete, before you assemble. Place all wooden furniture
parts on a clean and flat soft surface to prevent from being scratched.
Follow the figure to start assembling.
CAUTIONS : 1. Do not FULLY - TIGHTEN the nut or nut bolt until all nut or bolt is ready assembed.
2. Do not OVER - TIGHTEN the nut or bolt to avoid causing damages to the thread.
3. Keep all hardware parts out of reach of children.
NOTE : THE LIST AND QUANTITY SHOWN ARE FOR 1 UNIT ASSEMBLY.
Tool needed : Screwdriver & Hammer (not provider).
STEP 1 STEP 2
1 OF 3
417
CE
PART LIST
ITEM DESCRIPTION QTY
A CUSHION BACK 1 PC
B CUSHION SEAT 1 PC
C LEG SUPPORT FRONT 1 PC
D LEG SUPPORT BACK 1 PC
E LEG LEFT 1 PC
F LEG RIGHT 1 PC
D
FL
R
9
C
D
FRONT
BACK
1.1 Open the zip at the bottom of cushion seat and take out all part hardware.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10

Baxton Studio BBT8051-Dark Brown/Walnut-4PC Dining Nook Set Assembly Instructions

Brand
Baxton Studio
Model
BBT8051-Dark Brown/Walnut-4PC Dining Nook Set
Type
Assembly Instructions

Baxton Studio BBT8051-Dark Brown/Walnut-4PC Dining Nook Set is an assembly furniture set, that includes a table top, four legs, two cushions, leg supports, and a variety of hardware including bolts, washers, a screwdriver, wood, screws, an Allen key, and wood dowels. The maximum assembly time is estimated to be 1 hour and 59 minutes. The document provides certain cautions, including a direction not to fully tighten bolts until all bolts and nuts are assembled. It also provides warnings about damage to the thread if bolts are overtightened.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents