1 of 3
Tools Required
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x 1
A
Package Contents
PARTS BAG
Fixture Body
x 1
H
Crossbar Assembly Fixture Chain Ceiling Canopy Shade and Bulb
Table of
Contents
Fixture Height
Adjustable17.25” to 63.75”
Fixture Chain
x 1
E
Ceiling Canopy
x 1
F
Quick Link
x 2
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
G
Outlet Box Screw
x 2
B
Wire Connector
x 3
C
STEP 1 STEP 3 STEP 4
STEP 2 STEP 5
Shade
x 1
Light Source
BULB BASE TYPE
Medium (E26)
BULB SHAPE
TYPE A
100W
MAX
1 BULB REQUIRED
BULB NOT INCLUDED
Installation Instructions: UQL3791
www.urbanambiance.com
2 of 3
STEP 1
1 2 3
Step 1
Install crossbar assembly
Step 2 - 3
Test fitting ceiling canopy to nipple
STEP 2
2
Step 2 - 3
Install Fixture Chain
1
Step 1
Adjust fixture chain length
3
Suggested Chain Length:
8’ ceiling: 19” Chain
9’ ceiling: 31” Chain
10’ ceiling: 43” Chain
N
L
N
L
www.urbanambiance.com
3 of 3
STEP 3
1 2
Step 1
Feed the fixture wires
through the loop
N
L
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
STEP 4
STEP 5
www.urbanambiance.com
/
