Page is loading ...
1of4
ToolsRequired
Warnings and Cautions
Turn off the electricity at the circuit breaker
before installation. Consult a licensed
electrician if in doubt about installation.
Turn off power to the fixture and allow the
bulbs to cool before replacing.
Crossbar Assembly
x1
A
Package Contents
PARTS BAG
Fixture Body
x1
H
Crossbar Assembly Fixture Chain Ceiling Canopy Bulb
Table of
Contents
STEP 2 STEP 3 STEP 5 STEP 6
FixtureHeight
Adjustable30.25”to78.25”
Fixture Chain
x1
E
Ceiling Canopy
x1
F
Quick Link
x2
D
Preparation: Identify and inspect all parts
before beginning the installation.
Missing or damaged parts? Contact your
original place of purchase.
Wiring
STEP 4
Center Column
x1
G
Outlet Box Screw
x2
B
Wire Connector
x3
C
ISocket Assembly
x1
LightSource
BULB BASE TYPE
Candelabra (E12)
BULB SHAPE
TYPE B
60W
MAX
4BULBSREQUIRED
BULBSNOTINCLUDED
Fixture Body
STEP 1
Installation Instructions: UQL3622
www.urbanambiance.com
2of4
STEP 2
1 2 3
Step 1
Install crossbar assembly
Step2-3
Test fitting ceiling canopy to nipple
STEP 3
2
Step2-3
Install Fixture Chain
1
Step 1
Adjust fixture chain length
3
Suggested Chain Length:
8’ ceiling:
9’ ceiling:
10’ ceiling:
4” Chain
16” Chain
28” Chain
N
L
N
L
STEP 1
www.urbanambiance.com
3of4
STEP 4
1 2
Step 1
Feed the fixture wires
through the loop
N
L
*Green Ground Screw
on crossbar optional
White wire (neutral)
from outlet box
Ground wire
from Fixture
Black or Red wire (hot)
from outlet box
Bare or Green ground wire
from outlet box
Supply wire from fixture
ribbed side or identified
with the Label “N”
supply wire from fixture
smooth side or identified
with the label “L”
STEP 5
www.urbanambiance.com
4of4
STEP 6
www.urbanambiance.com
/
